Kevin O'Connor 7201f41664 manual_stepper: Support registering as an additional axis ... Add a new G-Code command that can register a manual_stepper as an additional axis on standard G-Code G1 commands. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2025-05-12 20:15:03 -04:00
..
sdcard_loop
bed_screws.cfg
bed_screws.test
bltouch.cfg
bltouch.test
commands.test	extruder: Allow dynamic adjustment of pressure advance (#6635)	2024-07-11 14:43:21 -04:00
corexyuv.cfg	kinematics: Generic Cartesian kinematics implementation (#6815)	2025-05-06 18:06:36 -04:00
corexyuv.test	kinematics: Generic Cartesian kinematics implementation (#6815)	2025-05-06 18:06:36 -04:00
delta.test
delta_calibrate.cfg
delta_calibrate.test
dual_carriage.cfg	dual_carriage: Fixed broken safe_distance parameter	2025-05-07 14:23:39 -04:00
dual_carriage.test	idex_modes: Improved restoring position in RESTORE_DUAL_CARRIAGE_STATE	2024-08-03 14:40:52 -04:00
exclude_object.cfg
exclude_object.test
extruders.cfg
extruders.test
gcode_arcs.cfg
gcode_arcs.test
generic_cartesian.cfg	kinematics: Generic Cartesian kinematics implementation (#6815)	2025-05-06 18:06:36 -04:00
generic_cartesian.test	kinematics: Generic Cartesian kinematics implementation (#6815)	2025-05-06 18:06:36 -04:00
hybrid_corexy_dual_carriage.cfg
hybrid_corexy_dual_carriage.test
input_shaper.cfg
input_shaper.test
led.cfg
led.test
linuxtest.cfg
linuxtest.test
load_cell.cfg	hx71x: Avoid base classes to improve python2 compatibility	2024-09-12 13:15:01 -04:00
load_cell.test	hx71x: Avoid base classes to improve python2 compatibility	2024-09-12 13:15:01 -04:00
macros.cfg
macros.test
manual_stepper.cfg
manual_stepper.test	manual_stepper: Support registering as an additional axis	2025-05-12 20:15:03 -04:00
move.gcode
multi_z.cfg
multi_z.test
out_of_bounds.test
polar.test
pressure_advance.cfg	extruder: Allow dynamic adjustment of pressure advance (#6635)	2024-07-11 14:43:21 -04:00
pressure_advance.test	extruder: Allow dynamic adjustment of pressure advance (#6635)	2024-07-11 14:43:21 -04:00
printers.test	config: Config for Geeetech A-series printers: A10/M/T and A20/M/T (#6767)	2025-01-03 09:32:07 -05:00
pwm.cfg	pwm_cycle_time: New module for output pins with dynamic cycle times	2024-01-23 20:04:03 -05:00
pwm.test	pwm_cycle_time: New module for output pins with dynamic cycle times	2024-01-23 20:04:03 -05:00
quad_gantry_level.test
rotary_delta_calibrate.cfg
rotary_delta_calibrate.test
screws_tilt_adjust.cfg
screws_tilt_adjust.test
sdcard_loop.cfg
sdcard_loop.test
temperature.cfg
temperature.test
tmc.cfg
tmc.test
z_tilt.cfg
z_tilt.test
z_virtual_endstop.cfg
z_virtual_endstop.test