Adds a toggle to enable or disable flow compensation based on the filament
width sensor readings without disabling the sensor entirely.
Useful on printers where the hall effect sensor which is too inaccurate to
helpfully adjust the extrusion multiplier, but is good enough to act as a
filament runout sensor.
Includes commands to enable and disable flow compensation, and to query the
state. Also includes updates to the relevant doc pages.
Signed-off-by: Ben Lye ben@lye.co.nz
Deprecate the PROBE command's exported value
`{printer.probe.last_z_result}`. This value effectively returns the
toolhead Z position when the probe triggers and user's then need to
adjust the result using the probe's configured z_offset.
Introduce a new `{printer.probe.last_probe_position}` as a
replacement. This replacement has an easier to understand behavior -
it states that the probe hardware estimates that if the toolhead is
commanded to last_probe_position.x, last_probe_position.y and descends
then the tip of the toolhead should first make contact at a Z height
of last_probe_position.z . That is, the new exported value already
takes into account the probe's configured xyz offsets.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* tests: Added a regression test for generic_cartesian kinematics
* kinematics: An intial implementation of generic_cartesian kinematics
* generic_cartesian: Refactored kinematics configuration API
* generic_cartesian: Use stepper instead of kinematic_stepper in configs
* generic_cartesian: Added SET_STEPPER_KINEMATICS command
* generic_cartesian: Fixed parsing of section names
* docs: Generic Caretsian kinematics documentation and config samples
* generic_cartesian: Implemented multi-mcu homing validation
* generic_cartesian: Fixed typos in docs, minor fixes
* generic_cartesian: Renamed `kinematics` option to `carriages`
* generic_cartesian: Moved kinematic_stepper.py file
* idex_modes: Internal refactoring of handling dual carriages
* stepper: Refactored the code to not store a reference to config object
* config: Updated example-generic-cartesian config
* generic_cartesian: Restricted SET_STEPPER_CARRIAGES and exported status
* idex_modes: Fixed handling stepper kinematics with input shaper enabled
* config: Updated configs and tests for SET_DUAL_CARRIAGE new params
* generic_cartesian: Avoid inheritance in the added classes
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
`hall_filament_width_sensor` contains a runout sensor object internally.
This exposes those values in the API status result.
```
SEND: {"id":123,"method":"objects/query","params":{"objects":{"hall_filament_width_sensor":["enabled","filament_detected","is_active","Diameter","Raw"]}}}
GOT: b'{"id":123,"result":{"eventtime":199567.823596603,"status":{"hall_filament_width_sensor":{"enabled":true,"filament_detected":true,"is_active":true,"Diameter":1.9499999999999986,"Raw":6113}}}}'
```
The duplication of `is_active` and `enabled` seems confusing, but both
of these can be independently manipulated by GCode:
```
SEND: {"id":123,"method":"gcode/script","params":{"script":"DISABLE_FILAMENT_WIDTH_SENSOR"}}
GOT: b'{"id":123,"result":{}}'
SEND: {"id":123,"method":"objects/query","params":{"objects":{"hall_filament_width_sensor":["enabled","is_active"]}}}
GOT: b'{"id":123,"result":{"eventtime":199770.446013297,"status":{"hall_filament_width_sensor":{"enabled":true,"is_active":false}}}}'
SEND: {"id":123,"method":"gcode/script","params":{"script":"SET_FILAMENT_SENSOR SENSOR=hall_filament_width_sensor ENABLE=0"}}
GOT: b'{"id":123,"result":{}}'
SEND: {"id":123,"method":"objects/query","params":{"objects":{"hall_filament_width_sensor":["enabled","is_active"]}}}
GOT: b'{"id":123,"result":{"eventtime":199847.927726196,"status":{"hall_filament_width_sensor":{"enabled":false,"is_active":false}}}}'
```
Signed-off-by: Russell Cloran <rcloran@gmail.com>
* Add gram scale features to load_cell
* Convert sensor counts to grams and make this available via unix socket and object status
* Basic GCodes for tearing and reading the load cell
* Guided Calibration
* Diagnostic gcode to check the health of the load cell
* Update load_cell Documentation
* Add API server load_cell/dump_force endpoint
* Update [load_cell] config with calibration fields
* Add G-Code commands for working with load cells
* Add status reference for load_cell objects
Signed-off-by: Gareth Farrington <gareth@waves.ky>
Add support for a new get_canbus_status command to canserial.c .
Add new canbus_stats.py module that will periodically query canbus
mcus for connection status information.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This reverts commit b029d04668.
The MCU_Stepper class does not have a is_motor_enabled() method, so
the change above results in an internal exception.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Adding position and enabled in manual_stepper status. Enabled is already available through stepper_enable object. But this makes it more straightforward to access it.
Signed-off-by: Viesturs Zarins <viesturz@gmail.com>
The user facing max_accel_to_decel setting is complicated and
confusing. Replace it with a new minimum_cruise_ratio parameter.
Internally this user-facing parameter will calculate the existing
low-level "accel_to_decel" mechanism.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Remove support for changing the cycle time of pwm pins from the
output_pin module. Use a new pwm_cycle_time module that supports
setting dynamic cycle times. This simplifies the output_pin code and
low-level pin update code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
The output_pin module is only capable of updating an output pin at
most once every 100ms. Add a new pwm_tool module that is capable of
queuing updates in the micro-controller and thus allowing for much
higher update rates.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
COPY and MIRROR mode implementation
Correctly apply input shaper params to new dual_carriage
Added SAVE_/RESTORE_IDEX_STATE commands
Documentation updates for the new IDEX modes
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
This adds a gcode command that can be used insight the slicer to pass the total layer count and current layer information.
Signed-off-by: Stefan Dej <meteyou@gmail.com>
Also added status report for extruder_stepper objects with the
current pressure advance parameters values.
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
Adds a save_config_pending_items to the status reported by
configfile reflecting the items and values that a future
SAVE_CONFIG would actually persist.
Signed-off-by: Kurt Haenen <kurt.haenen@gmail.com>
Fix reference to neopixel color_data in status reference documentation
so the given example works as expected.
Signed-off-by: Matt Heath <hello@mattheath.com>
- Add dual_carriage abilities for hybrid-corexy and hybrid-corexz
- Introduce the module idex_mode
- Fix add_stepper to the correct rail in hybrid-corexy
Signed-off-by: Fabrice GALLET <tircown@gmail.com>
