{
    "type": "process",
    "name": "fdm_process_single_common",
    "inherits": "fdm_process_common",
    "from": "system",
    "instantiation": "false",
    "bridge_speed": [
        "50"
    ],
    "enable_overhang_speed": [
        "1"
    ],
    "enable_height_slowdown": [
        "0"
    ],
    "gap_infill_speed": [
        "50"
    ],
    "initial_layer_acceleration": [
        "500"
    ],
    "initial_layer_infill_speed": [
        "60"
    ],
    "initial_layer_speed": [
        "30"
    ],
    "inner_wall_acceleration": [
        "0"
    ],
    "inner_wall_speed": [
        "150"
    ],
    "internal_solid_infill_speed": [
        "150"
    ],
    "outer_wall_acceleration": [
        "5000"
    ],
    "overhang_1_4_speed": [
        "0"
    ],
    "overhang_2_4_speed": [
        "50"
    ],
    "overhang_3_4_speed": [
        "30"
    ],
    "overhang_4_4_speed": [
        "10"
    ],
    "print_extruder_id": [
        "1"
    ],
    "print_extruder_variant": [
        "Direct Drive Standard"
    ],
    "slowdown_start_height": [
        "0"
    ],
    "slowdown_start_speed": [
        "1000"
    ],
    "slowdown_start_acc": [
        "100000"
    ],
    "slowdown_end_height": [
        "400"
    ],
    "slowdown_end_speed": [
        "1000"
    ],
    "slowdown_end_acc": [
        "100000"
    ],
    "small_perimeter_speed": [
        "50%"
    ],
    "small_perimeter_threshold": [
        "0"
    ],
    "sparse_infill_acceleration": [
        "100%"
    ],
    "sparse_infill_speed": [
        "250"
    ],
    "support_speed": [
        "150"
    ],
    "top_surface_acceleration": [
        "2000"
    ],
    "top_surface_speed": [
        "200"
    ],
    "travel_speed": [
        "500"
    ],
    "travel_speed_z": [
        "0"
    ],
    "vertical_shell_speed": [
        "80%"
    ]
}