{
    "type": "machine",
    "name": "fdm_machine_common",
    "from": "system",
    "instantiation": "false",
    "printer_technology": "FFF",
    "extruder_colour": ["#FCE94F"],
    "extruder_offset": ["0x0"],
    "gcode_flavor": "klipper",
    "silent_mode": "1",
    "machine_max_acceleration_e": ["5000"],
    "machine_max_acceleration_extruding": ["5000"],
    "machine_max_acceleration_retracting": ["5000"],
    "machine_max_acceleration_x": ["3500"],
    "machine_max_acceleration_y": ["3500"],
    "machine_max_acceleration_z": ["500"],
    "machine_max_speed_e": ["120"],
    "machine_max_speed_x": ["500"],
    "machine_max_speed_y": ["500"],
    "machine_max_speed_z": ["150"],
    "machine_max_jerk_e": ["2.5"],
    "machine_max_jerk_x": ["10"],
    "machine_max_jerk_y": ["10"],
    "machine_max_jerk_z": ["2"],
    "machine_min_extruding_rate": ["0"],
    "machine_min_travel_rate": ["0"],
    "max_layer_height": ["0.3"],
    "min_layer_height": ["0.1"],
    "extruder_clearance_radius": "65",
    "extruder_clearance_height_to_rod": "36",
    "extruder_clearance_height_to_lid": "140",
    "printer_settings_id": "",
    "retraction_minimum_travel": ["2"],
    "retract_before_wipe": ["0%"],
    "retract_when_changing_layer": ["1"],
    "retraction_length": ["7"],
    "retract_length_toolchange": ["2"],
    "z_hop": ["0.8"],
    "retract_restart_extra": ["0"],
    "retract_restart_extra_toolchange": ["0"],
    "retraction_speed": ["80"],
    "deretraction_speed": ["40"],
    "single_extruder_multi_material": "0",
    "change_filament_gcode": "",
    "z_lift_type": "NormalLift",
    "default_print_profile": "",
    "nozzle_type": "undefine",
    "auxiliary_fan": "0",
    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
    "machine_pause_gcode": "",
    "machine_start_gcode": "M104 S[nozzle_temperature_initial_layer] ; set temp\nG28\nM109 S[nozzle_temperature_initial_layer] ; wait for temp\nG28\nG91 ; relative positioning\nG1 Z-40 F4000\nG90 ; absolute positioning\n",
    "machine_end_gcode": "G28\nM104 S0\nM84 ; disable motors"
}