# Description
Transforming internal 3D Files to DRC to reduce orca size
## Calibs
(Not counting temperature_tower)
Original 6,01 MB
Converted 1,57 MB
- Mesh (STL/3MF) to LossLess DRC
- SCV-V2 116kb -> 15kb
- fast_tower_test 66kb -> 9kb
- ringing_tower 172kb -> 22kb
- pressure_advance_test 124kb -> 16kb
- tower_with_seam 2kb -> 1kb
- retraction_tower 1.726kb -> 97kb (done at 25, if 0 = 212kb)
- ~~temperature_tower~~ Updated, fixed, wider range and Draco in: #12103 5.075kb -> 485kb
- vfa 1.453kb -> 179kb
- Step
- SpeedTestStructure 1.312kb -> 86kb
- Imported:
- Linear Deflection: 0.002
- Angle Deflection: 0.25
- Exported as LossLess DRC
## Handy Models
Original 4,66 MB
Converted 1,53 MB
- STL/3MF to LossLess DRC (Maybe reduce the bit depth???)
- 3DBenchy 2.417kb -> 570kb (done at 25, if 0 = 1.340kb)
- calicat 43kb -> 6kb
- ksr_fdmtest_v4 128kb -> 74kb
- Orca_stringhell 63kb -> 37kb
- OrcaToleranceTest 758kb -> 94kb
- Stanford_Bunny 755kb -> 187kb (done at 25, if 0 = 316kb)
- Voron_Design_Cube_v7 34kb -> 21kb
## Bit used
After some test with a lot of models and all possible combinations it's safe to say that >20 is BondingBox and mm3 volume the best it can.
So i used 25 just as a safe value in:
- Stanford_Bunny
- 3DBenchy
- retraction_tower
<img width="324" height="499" alt="imagen" src="https://github.com/user-attachments/assets/bb5000cf-c1fa-4153-af2f-691ea59bc254" />
<img width="324" height="499" alt="imagen" src="https://github.com/user-attachments/assets/f38e3528-0d05-4621-984e-f107a0eec91e" />
## MultiPart 3MF
Didint change them, too much trouble for small changes.
