1. Sometimes the first layer is too small and does not have enough space to extrude.That will make first layer extruders empty
jira: STUDIO-13030
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I69b99ab74101c772f4c91e955060e403988bb91c
(cherry picked from commit 9699397858c6d52d027e79e91041a9dac7280bba)
1. Try to merge filaments before grouping
2. Set max match num for machine filamnet in match mode
jira:STUDIO-10392
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2451d838e07ee02f493fda4dc702f3d13b2ad37b
(cherry picked from commit d15fc37ff2fa048e38a0b132bb3ae525ff666fab)
1. Add filament_is_support field. Format the filament type
2. Optimize machine filament info logic
jira:STUDIO-10326
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia8bfc37095339e73c98209b4e3f1e0804e511e88
(cherry picked from commit 001144400b841629439a890d46fa40a7296689ba)
and add most used_extruder for print by object
jira:none
Change-Id: I021069e865992828b098d73c0d704ba7edbd55d8
(cherry picked from commit ae62f7b8e4b4258318c0d941963eddfb70e86c15)
1. Detect unprintable area for extruder when slicing
2. Always do filament map again if object pos changed
jira:STUDIO-9473
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic01b8be8e3b08ba6b34efb2d3c451c9e985a03e8
(cherry picked from commit f1445ff0477795e9baf3792348ff27d79ee2308c)
1.Compare stats of AutoForFlush with other filament map modes
2.Refine the function signature of filament group
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iec2aff069d8c44343df8b82f045c61354c7d1c2a
(cherry picked from commit 95e49986f32070756182a31843f4f37f863f07ac)
1.Add more filament map modes
2.Filament map and mode are set as project config
3.Plate filament map is only valid when plate filament mode is
manual
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I33b2f853e0b77b9d605be1f2f1172b44df43da15
(cherry picked from commit e45f8c6dc2146e1e31a1c21e8aaada540af112d0)
1.Only do reorder if requseted.In by object mode,we only need
to collect the filaments in the object for filament grouping
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id88f2449c6d3c5d45b9ff87513308d997fa72da1
(cherry picked from commit 7b5818fe6c538123373243ec8dfedc3c2fa68e6d)
1.Always do filament group to get correct filament map
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie4e61c310f6c0cfeacb2a49c4f065f9674b6a35f
(cherry picked from commit 242554557b1ecd72355841826af707580fc583b6)
1.Caused by uninitialized filament map in mapping for AMS
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I71ce6001fc6f2e72eb9303fcaba0bac16ad70dc9
(cherry picked from commit 48023e4c154c118c9396b6065b7e2476970fd441)
1.Use max flow network to handle limit
2.Support setting master extruder id
3.Fix the issue in the KMedoids algorithm where data is overwritten
after each retry.
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Idd2bedf39f61e7a65eb4199852f60b8fbebe0a7d
(cherry picked from commit 3cfb49a1b9dc2c76066ec441f1028f99a4bf99c4)
when the ams is 0/0, should not consider the print connect status
jira:none
Change-Id: I2288ff15894d5c734a98b830df6678cab2bd12fc
(cherry picked from commit 20837717d411016251c4831586b0fa61350a08b2)
1.If the group result differs little in flush,we will choose the one
that best fits the ams filaments
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icd147b406e3494c841ef13564ad1b1231ad798fd
(cherry picked from commit 0b95bdd9d950918ea6979da6b4d62b2d2cd25b99)
1.Use float to store the weight copmputed in the procedure.Avoid the
issue where filament weight remains at 0 after changing filaments
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iff0cfc6e22f34affbc232dbfe196f27ee06d2d9e
(cherry picked from commit 994e4f4840a6734ab479e10d39462cc692bc4d77)
1.Use min cost max flow to solve the tool order
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I909845039b67c7fe3ddd42580ad3f1d71d52262d
(cherry picked from commit 0716b8518ef62e0eac7c45de8bafb1458d8f9a8e)
1.In auto mode,display the statistics of auto mode and single
extruder
2.In manual mode,display the statistics of manual mode and auto mode
3.Support by object mode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If54c4db79f33d5278c0f18d01ab0518e8660f9c7
(cherry picked from commit 2dbc5c939666e294c805ee4bf33ec09976688be3)
