Fix various typos in source documentation (#11553)

* Fix various typos in source documentation

* Delete cmake/modules/Catch2/CatchAddTests.cmake

* Delete tests/example/example_tests_main.cpp

* Revert test_config.cpp

---------

Co-authored-by: Ian Bassi <ian.bassi@outlook.com>

CMakeLists.txt

@@ -129,7 +129,7 @@ option(SLIC3R_MSVC_COMPILE_PARALLEL "Compile on Visual Studio in parallel" 1)
 option(SLIC3R_MSVC_PDB          "Generate PDB files on MSVC in Release mode" 1)
 option(SLIC3R_ASAN              "Enable ASan on Clang and GCC" 0)
 # If SLIC3R_FHS is 1 -> SLIC3R_DESKTOP_INTEGRATION is always 0, othrewise variable.
-CMAKE_DEPENDENT_OPTION(SLIC3R_DESKTOP_INTEGRATION "Allow perfoming desktop integration during runtime" 1 "NOT SLIC3R_FHS" 0)
+CMAKE_DEPENDENT_OPTION(SLIC3R_DESKTOP_INTEGRATION "Allow performing desktop integration during runtime" 1 "NOT SLIC3R_FHS" 0)
 
 set(OPENVDB_FIND_MODULE_PATH "" CACHE PATH "Path to OpenVDB installation's find modules.")
 
@@ -731,7 +731,7 @@ add_custom_target(gettext_make_pot
 )
 add_custom_target(gettext_merge_po_with_pot
     WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}
-    COMMENT "Merge localization po with new generted pot file"
+    COMMENT "Merge localization po with new generated pot file"
 )
 file(GLOB BBL_L10N_PO_FILES "${BBL_L18N_DIR}/*/OrcaSlicer*.po")
 foreach(po_file ${BBL_L10N_PO_FILES})

cmake/modules/FindGLEW.cmake

@@ -3,7 +3,7 @@
 
 # PrusaSlicer specifics:
 # This file is backported from CMake 3.15 distribution to behave uniformly
-# across all versions of CMake. It explicitly adds GLEW_STATIC complile 
+# across all versions of CMake. It explicitly adds GLEW_STATIC compile 
 # definition to static targets which is needed to prevent link errors.
 
 #[=======================================================================[.rst:

cmake/modules/FindTBB.cmake.in

@@ -61,7 +61,7 @@
 #
 # * TBB_FOUND             - Set to false, or undefined, if we haven’t found, or
 #                           don’t want to use TBB.
-# * TBB_<component>_FOUND - If False, optional <component> part of TBB sytem is
+# * TBB_<component>_FOUND - If False, optional <component> part of TBB system is
 #                           not available.
 # * TBB_VERSION           - The full version string
 # * TBB_VERSION_MAJOR     - The major version
@@ -77,7 +77,7 @@
 #                           tbbmalloc, tbbmalloc_debug, tbb_preview, or 
 #                           tbb_preview_debug.
 #
-# The following varibles should be used to build and link with TBB:
+# The following variables should be used to build and link with TBB:
 #
 # * TBB_INCLUDE_DIRS        - The include directory for TBB.
 # * TBB_LIBRARIES           - The libraries to link against to use TBB.

deps/CMakeLists.txt

@@ -20,8 +20,8 @@ endif()
 # On Windows, architecture (64 vs 32 bits) is judged based on the compiler variant.
 # To build dependencies for either 64 or 32 bit OS, use the respective compiler command line.
 #
-# WARNING: On UNIX platforms wxWidgets hardcode the destdir path into its `wx-conffig` utility,
-# therefore, unfortunatelly, the installation cannot be copied/moved elsewhere without re-installing wxWidgets.
+# WARNING: On UNIX platforms wxWidgets hardcode the destdir path into its `wx-config` utility,
+# therefore, unfortunately, the installation cannot be copied/moved elsewhere without re-installing wxWidgets.
 #
 
 cmake_minimum_required(VERSION 3.2)

scripts/Dockerfile

@@ -62,7 +62,7 @@ COPY ./ OrcaSlicer
 
 WORKDIR OrcaSlicer
 
-# These can run together, but we run them seperate for podman caching
+# These can run together, but we run them separate for podman caching
 # Update System dependencies
 RUN ./build_linux.sh -u
 

scripts/linux.d/arch

@@ -1,7 +1,7 @@
 #!/bin/bash
 # these are the Arch Linux specific build functions
 
-# Addtional Dev packages for OrcaSlicer
+# Additional Dev packages for OrcaSlicer
 export REQUIRED_DEV_PACKAGES=(
     cmake
     curl

scripts/linux.d/clear-linux-os

@@ -1,7 +1,7 @@
 #!/bin/bash
 # these are the Clear Linux specific build functions
 
-# Addtional bundles for OrcaSlicer
+# Additional bundles for OrcaSlicer
 export REQUIRED_BUNDLES=(
     c-basic
     dev-utils

scripts/orca_extra_profile_check.py

@@ -105,7 +105,7 @@ def check_filament_compatible_printers(vendor_folder):
         if 'inherits' in content:
             inherits = content['inherits']
             if inherits not in profiles:
-                raise ValueError(f"Parent profile not found: {inherits}, referrenced in {profile['file_path']}")
+                raise ValueError(f"Parent profile not found: {inherits}, referenced in {profile['file_path']}")
             
             return get_inherit_property(profiles[inherits], key)
         

src/CMakeLists.txt

@@ -103,7 +103,7 @@ if(ORCA_TOOLS)
 endif()
 
 # Create a slic3r executable
-# Process mainfests for various platforms.
+# Process manifests for various platforms.
 configure_file(${CMAKE_CURRENT_SOURCE_DIR}/dev-utils/platform/msw/OrcaSlicer.rc.in ${CMAKE_CURRENT_BINARY_DIR}/OrcaSlicer.rc @ONLY)
 configure_file(${CMAKE_CURRENT_SOURCE_DIR}/dev-utils/platform/msw/OrcaSlicer.manifest.in ${CMAKE_CURRENT_BINARY_DIR}/OrcaSlicer.manifest @ONLY)
 configure_file(${CMAKE_CURRENT_SOURCE_DIR}/dev-utils/platform/osx/Info.plist.in ${CMAKE_CURRENT_BINARY_DIR}/Info.plist @ONLY)
@@ -136,7 +136,7 @@ elseif (MSVC)
     # Manifest is provided through OrcaSlicer.rc, don't generate your own.
     set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} /MANIFEST:NO")
 else ()
-    # Boost on Raspberry-Pi does not link to pthreads explicitely.
+    # Boost on Raspberry-Pi does not link to pthreads explicitly.
     target_link_libraries(OrcaSlicer ${CMAKE_DL_LIBS} -lstdc++ Threads::Threads pangoft2-1.0)
 endif ()
 
@@ -184,7 +184,7 @@ set(output_dlls_Release "")
 set(output_dlls_Debug "")
 set(output_dlls_RelWithDebInfo "")
 if (WIN32)
-    # This has to be a separate target due to the windows command line lenght limits
+    # This has to be a separate target due to the windows command line length limits
     add_custom_target(COPY_DLLS ALL DEPENDS OrcaSlicer)
 
     if (CMAKE_CONFIGURATION_TYPES)

src/OrcaSlicer.cpp

@@ -254,7 +254,7 @@ typedef struct _cli_callback_mgr {
         while(1) {
             lck.lock();
             m_condition.wait(lck, [this](){ return m_data_ready || m_exit; });
-            BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << ": wakup.";
+            BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << ": wakeup.";
             if (m_data_ready) {
                 notify();
                 m_data_ready = false;
@@ -1221,7 +1221,7 @@ int CLI::run(int argc, char **argv)
 
     PrinterTechnology printer_technology = get_printer_technology(m_config);
 
-    //BBS: remove GCodeViewer as seperate APP logic
+    //BBS: remove GCodeViewer as separate APP logic
     /*bool 							start_as_gcodeviewer =
 #ifdef _WIN32
             false;
@@ -1299,7 +1299,7 @@ int CLI::run(int argc, char **argv)
             params.input_files  = std::move(m_input_files);
             BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ", normal mode, input_files size = "<<params.input_files.size();
         }
-        //BBS: remove GCodeViewer as seperate APP logic
+        //BBS: remove GCodeViewer as separate APP logic
         //params.start_as_gcodeviewer = start_as_gcodeviewer;
 
         BOOST_LOG_TRIVIAL(info) << "begin to launch OrcaSlicer GUI soon";
@@ -2636,7 +2636,7 @@ int CLI::run(int argc, char **argv)
         }
     };
 
-    //update seperate configs into full config
+    //update separate configs into full config
     auto update_full_config = [](DynamicPrintConfig& full_config, const DynamicPrintConfig& config, std::set<std::string>& diff_key_sets, bool variant_count_changed, std::set<std::string>& key_set_1, std::set<std::string>& key_set_2, std::vector<int> variant_index, bool update_all = false, bool skip_gcodes = false) {
         const t_config_option_keys& config_keys = config.keys();
         BOOST_LOG_TRIVIAL(info) << boost::format("update_full_config: config keys count %1%")%config_keys.size();
@@ -4616,7 +4616,7 @@ int CLI::run(int argc, char **argv)
                         y = tower_margin;
                     }
 
-                    //create the options using default if neccessary
+                    //create the options using default if necessary
                     ConfigOptionFloats* wipe_x_option = m_print_config.option<ConfigOptionFloats>("wipe_tower_x", true);
                     ConfigOptionFloats* wipe_y_option = m_print_config.option<ConfigOptionFloats>("wipe_tower_y", true);
                     ConfigOptionFloat* width_option = m_print_config.option<ConfigOptionFloat>("prime_tower_width", true);
@@ -4756,7 +4756,7 @@ int CLI::run(int argc, char **argv)
                         y = WIPE_TOWER_MARGIN;
                     }
 
-                    //create the options using default if neccessary
+                    //create the options using default if necessary
                     ConfigOptionFloats* wipe_x_option = m_print_config.option<ConfigOptionFloats>("wipe_tower_x", true);
                     ConfigOptionFloats* wipe_y_option = m_print_config.option<ConfigOptionFloats>("wipe_tower_y", true);
                     ConfigOptionFloat wt_x_opt(x);
@@ -4913,7 +4913,7 @@ int CLI::run(int argc, char **argv)
                         ConfigOptionFloat wt_x_opt(x);
                         ConfigOptionFloat wt_y_opt(y);
 
-                        //create the options using default if neccessary
+                        //create the options using default if necessary
                         ConfigOptionFloats* wipe_x_option = m_print_config.option<ConfigOptionFloats>("wipe_tower_x", true);
                         ConfigOptionFloats* wipe_y_option = m_print_config.option<ConfigOptionFloats>("wipe_tower_y", true);
                         ConfigOptionFloat* width_option = m_print_config.option<ConfigOptionFloat>("prime_tower_width", true);
@@ -5212,7 +5212,7 @@ int CLI::run(int argc, char **argv)
                     }
 
                     // Move the unprintable items to the last virtual bed.
-                    // Note ap.apply() moves relatively according to bed_idx, so we need to subtract the orignal bed_idx
+                    // Note ap.apply() moves relatively according to bed_idx, so we need to subtract the original bed_idx
                     for (ArrangePolygon& ap : unprintable)
                     {
                         ap.bed_idx = bed_idx_max + 1;
@@ -5386,7 +5386,7 @@ int CLI::run(int argc, char **argv)
                     }
 
                     // Move the unprintable items to the last virtual bed.
-                    // Note ap.apply() moves relatively according to bed_idx, so we need to subtract the orignal bed_idx
+                    // Note ap.apply() moves relatively according to bed_idx, so we need to subtract the original bed_idx
                     for (ArrangePolygon& ap : unprintable)
                     {
                         ap.bed_idx = bed_idx_max + 1;
@@ -6094,7 +6094,7 @@ int CLI::run(int argc, char **argv)
                                         outfile = outfile_dir + "/plate_" + std::to_string(index + 1) + ".gcode";
                                         part_plate->set_tmp_gcode_path(outfile);
                                     }
-                                    BOOST_LOG_TRIVIAL(info) << "process finished, will export gcode temporily to " << outfile << std::endl;
+                                    BOOST_LOG_TRIVIAL(info) << "process finished, will export gcode temporarily to " << outfile << std::endl;
                                     temp_time = (long long)Slic3r::Utils::get_current_time_utc();
                                     outfile = print_fff->export_gcode(outfile, gcode_result, nullptr);
                                     time_using_cache = time_using_cache + ((long long)Slic3r::Utils::get_current_time_utc() - temp_time);
@@ -6438,7 +6438,7 @@ int CLI::run(int argc, char **argv)
                     BOOST_LOG_TRIVIAL(error) << "init opengl failed! skip thumbnail generating" << std::endl;
                 }
                 else {
-                    BOOST_LOG_TRIVIAL(info) << "glewInit Sucess." << std::endl;
+                    BOOST_LOG_TRIVIAL(info) << "glewInit Success." << std::endl;
                     GLVolumeCollection glvolume_collection;
                     Model &model = m_models[0];
                     int obj_extruder_id = 1, volume_extruder_id = 1;
@@ -6513,7 +6513,7 @@ int CLI::run(int argc, char **argv)
                                     int dec_ret = decode_png_to_thumbnail(plate_data->thumbnail_file, plate_data->plate_thumbnail);
                                     if (!dec_ret)
                                     {
-                                        BOOST_LOG_TRIVIAL(info) << boost::format("decode png to mem sucess.");
+                                        BOOST_LOG_TRIVIAL(info) << boost::format("decode png to mem success.");
                                     }
                                     else {
                                         BOOST_LOG_TRIVIAL(warning) << boost::format("decode png to mem failed.");
@@ -6752,7 +6752,7 @@ int CLI::run(int argc, char **argv)
                     int dec_ret = decode_png_to_thumbnail(plate_data->thumbnail_file, plate_data->plate_thumbnail);
                     if (!dec_ret)
                     {
-                        BOOST_LOG_TRIVIAL(info) << boost::format("decode png to mem sucess.");
+                        BOOST_LOG_TRIVIAL(info) << boost::format("decode png to mem success.");
                         need_create_thumbnail_group = true;
                     }
                     else {
@@ -7151,7 +7151,7 @@ void CLI::print_help(bool include_print_options, PrinterTechnology printer_techn
 
     boost::nowide::cout
         << std::endl
-        << "Print settings priorites:" << std::endl
+        << "Print setting priorities:" << std::endl
         << "\t1) setting values from the command line (highest priority)"<< std::endl
         << "\t2) setting values loaded with --load_settings and --load_filaments" << std::endl
 	    << "\t3) setting values loaded from 3mf(lowest priority)" << std::endl;

src/OrcaSlicer_app_msvc.cpp

@@ -276,7 +276,7 @@ int wmain(int argc, wchar_t **argv)
         if (hInstance_OpenGL == nullptr) {
             printf("MESA OpenGL library was not loaded\n");
         } else
-            printf("MESA OpenGL library was loaded sucessfully\n");
+            printf("MESA OpenGL library was loaded successfully\n");
     }
 #endif /* SLIC3R_GUI */
 

tests/fff_print/test_data.hpp

@@ -37,7 +37,7 @@ enum class TestMesh {
     two_hollow_squares
 };
 
-// Neccessary for <c++17
+// Necessary for <c++17
 struct TestMeshHash {
     std::size_t operator()(TestMesh tm) const {
         return static_cast<std::size_t>(tm);

tests/fff_print/test_fill.cpp

@@ -139,7 +139,7 @@ TEST_CASE("Fill: Pattern Path Length", "[Fill]") {
         }
     }
 
-    #if 0   // Disabled temporarily due to precission issues on the Mac VM
+    #if 0   // Disabled temporarily due to precision issues on the Mac VM
     SECTION("Solid surface fill") {
         Slic3r::Points points {
             Point::new_scale(6883102, 9598327.01296997),

tests/libslic3r/test_geometry.cpp

@@ -170,7 +170,7 @@ TEST_CASE("Bounding boxes are scaled appropriately", "[Geometry]"){
 }
 
 
-TEST_CASE("Offseting a line generates a polygon correctly", "[Geometry]"){
+TEST_CASE("Offsetting a line generates a polygon correctly", "[Geometry]"){
 	Slic3r::Polyline tmp = { Point(10,10), Point(20,10) };
     Slic3r::Polygon area = offset(tmp,5).at(0);
     REQUIRE(area.area() == Slic3r::Polygon(Points({Point(10,5),Point(20,5),Point(20,15),Point(10,15)})).area());

tests/libslic3r/test_indexed_triangle_set.cpp

@@ -225,7 +225,7 @@ TEST_CASE("Reduce one edge by Quadric Edge Collapse", "[its]")
                     Vec3f(0.9f, .1f, -.1f)};
     its.indices  = {Vec3i32(1, 0, 3), Vec3i32(2, 1, 3), Vec3i32(0, 2, 3),
                    Vec3i32(0, 1, 4), Vec3i32(1, 2, 4), Vec3i32(2, 0, 4)};
-    // edge to remove is between vertices 2 and 4 on trinagles 4 and 5
+    // edge to remove is between vertices 2 and 4 on triangles 4 and 5
 
     indexed_triangle_set its_ = its; // copy
     // its_write_obj(its, "tetrhedron_in.obj");