diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot index 47e2efdd37..068ad889e1 100644 --- a/localization/i18n/OrcaSlicer.pot +++ b/localization/i18n/OrcaSlicer.pot @@ -429,7 +429,7 @@ msgstr "" msgid "Size" msgstr "" -msgid "uniform scale" +msgid "Uniform scale" msgstr "" msgid "Planar" @@ -684,7 +684,7 @@ msgstr "" msgid "Cut by Plane" msgstr "" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" msgid "Repairing model object" @@ -2173,31 +2173,31 @@ msgstr "" msgid "Select All" msgstr "" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "" msgid "Delete All" msgstr "" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "" msgid "Arrange" msgstr "" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "" msgid "Reload All" msgstr "" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "" msgid "Auto Rotate" msgstr "" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "" msgid "Delete Plate" @@ -2499,7 +2499,7 @@ msgstr "" msgid "Invalid numeric." msgstr "" -msgid "one cell can only be copied to one or multiple cells in the same column" +msgid "One cell can only be copied to one or more cells in the same column." msgstr "" msgid "Copying multiple cells is not supported." @@ -3562,7 +3562,7 @@ msgid "" "by anti-virus software." msgstr "" -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "" msgid "" @@ -4014,7 +4014,7 @@ msgstr "" msgid "Nozzle offset calibration" msgstr "" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "" msgid "Auto Check: Quick Release Lever" @@ -4732,7 +4732,7 @@ msgstr "" msgid "Sequence" msgstr "" -msgid "object selection" +msgid "Object selection" msgstr "" msgid "part selection" @@ -4741,7 +4741,7 @@ msgstr "" msgid "number keys" msgstr "" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "" msgid "" @@ -4971,7 +4971,7 @@ msgid "Only the object being edited is visible." msgstr "" #, possible-c-format, possible-boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "" @@ -6198,7 +6198,7 @@ msgstr "" msgid "Upload failed\n" msgstr "" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "" msgid "" @@ -7168,13 +7168,13 @@ msgstr "" msgid "Importing Model" msgstr "" -msgid "prepare 3MF file..." +msgid "Preparing 3MF file..." msgstr "" msgid "Download failed, unknown file format." msgstr "" -msgid "downloading project..." +msgid "Downloading project..." msgstr "" msgid "Download failed, File size exception." @@ -8015,10 +8015,10 @@ msgstr "" msgid "Product host" msgstr "" -msgid "debug save button" +msgid "Debug save button" msgstr "" -msgid "save debug settings" +msgid "Save debug settings" msgstr "" msgid "DEBUG settings have been saved successfully!" @@ -8307,7 +8307,7 @@ msgid "" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -msgid "send completed" +msgid "Send complete" msgstr "" msgid "Error code" @@ -9962,7 +9962,7 @@ msgstr "" msgid "Movement step set to 1 mm" msgstr "" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "" msgid "Camera view - Default" @@ -16657,7 +16657,7 @@ msgstr "" msgid "Plate Type" msgstr "" -msgid "filament position" +msgid "Filament position" msgstr "" msgid "Filament For Calibration" @@ -18291,7 +18291,7 @@ msgstr "" msgid "Upgrading" msgstr "" -msgid "syncing" +msgid "Syncing" msgstr "" msgid "Printing Finish" diff --git a/localization/i18n/ca/OrcaSlicer_ca.po b/localization/i18n/ca/OrcaSlicer_ca.po index c86404d01a..a6de007cf7 100644 --- a/localization/i18n/ca/OrcaSlicer_ca.po +++ b/localization/i18n/ca/OrcaSlicer_ca.po @@ -436,7 +436,7 @@ msgstr "" msgid "Size" msgstr "Mida" -msgid "uniform scale" +msgid "Uniform scale" msgstr "escala uniforme" msgid "Planar" @@ -696,7 +696,7 @@ msgstr "Connector" msgid "Cut by Plane" msgstr "Tallar pel pla" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" "les vores amb plecs poden ser causades per l'eina de tall, voleu solucionar-" "ho ara?" @@ -2266,31 +2266,31 @@ msgstr "" msgid "Select All" msgstr "Seleccionar-ho tot" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "seleccionar tots els objectes de la placa actual" msgid "Delete All" msgstr "Suprimir-les totes" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "eliminar tots els objectes de la placa actual" msgid "Arrange" msgstr "Ordenar" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "organitza la placa actual" msgid "Reload All" msgstr "Torna-ho a carregar Tot" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "torna a carregar-ho tot des del disc" msgid "Auto Rotate" msgstr "Rota automàticament" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "rotar automàticament la placa actual" msgid "Delete Plate" @@ -2609,7 +2609,8 @@ msgstr "Afegir un interval d'alçada" msgid "Invalid numeric." msgstr "Entrada numèrica no vàlida." -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "" "una cel·la només es pot copiar a una o diverses cel·les de la mateixa columna" @@ -3755,7 +3756,7 @@ msgstr "" "No s'ha pogut instal·lar el connector. Comproveu si el programari antivirus " "l'ha bloquejat o suprimit." -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "feu clic aquí per veure més informació" msgid "" @@ -4297,7 +4298,7 @@ msgstr "" msgid "Nozzle offset calibration" msgstr "" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "" msgid "Auto Check: Quick Release Lever" @@ -5025,7 +5026,7 @@ msgstr "Incrementar/reduir àrea edició" msgid "Sequence" msgstr "Seqüència" -msgid "object selection" +msgid "Object selection" msgstr "" msgid "part selection" @@ -5034,7 +5035,7 @@ msgstr "" msgid "number keys" msgstr "" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "" msgid "" @@ -5266,7 +5267,7 @@ msgid "Only the object being edited is visible." msgstr "Només és visible l'objecte que s'està editant." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "" @@ -6556,7 +6557,7 @@ msgstr "" msgid "Upload failed\n" msgstr "S'ha produït un error en la pujada\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "error en obtenir instance_id \n" msgid "" @@ -7604,13 +7605,14 @@ msgstr "Desar projecte" msgid "Importing Model" msgstr "Important Model" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "preparar el fitxer 3MF..." msgid "Download failed, unknown file format." msgstr "S'ha produït un error en la baixada, format de fitxer desconegut." -msgid "downloading project..." +msgid "Downloading project..." msgstr "descarregant projecte ..." msgid "Download failed, File size exception." @@ -8520,10 +8522,10 @@ msgstr "Amfitrió PRE: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Amfitrió del producte" -msgid "debug save button" +msgid "Debug save button" msgstr "botó de desar depuració" -msgid "save debug settings" +msgid "Save debug settings" msgstr "desar la configuració de depuració" msgid "DEBUG settings have been saved successfully!" @@ -8814,7 +8816,7 @@ msgid "" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -msgid "send completed" +msgid "Send complete" msgstr "enviament completat" msgid "Error code" @@ -10663,7 +10665,7 @@ msgstr "Moure la selecció 10 mm en direcció X positiva" msgid "Movement step set to 1 mm" msgstr "Pas de moviment configurat a 1 mm" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "teclat 1-9: establir filament per a objecte/peça" msgid "Camera view - Default" @@ -19026,7 +19028,7 @@ msgstr "" msgid "Plate Type" msgstr "Tipus de placa" -msgid "filament position" +msgid "Filament position" msgstr "posició del filament" msgid "Filament For Calibration" @@ -20886,7 +20888,7 @@ msgstr "Sense tasques històriques!" msgid "Upgrading" msgstr "Actualitzant" -msgid "syncing" +msgid "Syncing" msgstr "sincronitzant" msgid "Printing Finish" diff --git a/localization/i18n/cs/OrcaSlicer_cs.po b/localization/i18n/cs/OrcaSlicer_cs.po index 8e85a63391..92d942319c 100644 --- a/localization/i18n/cs/OrcaSlicer_cs.po +++ b/localization/i18n/cs/OrcaSlicer_cs.po @@ -457,7 +457,7 @@ msgstr "Souřadnice součásti" msgid "Size" msgstr "Rozměr" -msgid "uniform scale" +msgid "Uniform scale" msgstr "Jednotné měřítko" msgid "Planar" @@ -723,7 +723,7 @@ msgstr "Spojka" msgid "Cut by Plane" msgstr "Řez rovinou" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "Řezací nástroj způsobil ne-manifoldní hrany, chcete je nyní opravit?" msgid "Repairing model object" @@ -2330,31 +2330,31 @@ msgstr "Sloučit s" msgid "Select All" msgstr "Vybrat vše" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "Vybrat všechny objekty na aktuální podložce" msgid "Delete All" msgstr "Smazat vše" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "Smazat všechny objekty na aktuální podložce" msgid "Arrange" msgstr "Uspořádat" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "Uspořádat aktuální podložku" msgid "Reload All" msgstr "Přenačíst vše" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "Přenačíst vše z disku" msgid "Auto Rotate" msgstr "Automatické otáčení" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "Automatické otáčení aktuální podložky" msgid "Delete Plate" @@ -2685,7 +2685,8 @@ msgstr "Přidat rozsah výšky" msgid "Invalid numeric." msgstr "Neplatné číslo." -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "" "Jednu buňku lze kopírovat pouze do jedné nebo více buněk ve stejném " "sloupcijednu buňku lze zkopírovat pouze do jedné nebo více buněk ve stejném " @@ -3927,7 +3928,7 @@ msgstr "" "nebo smazán antivirovým softwarem.Nepodařilo se nainstalovat plugin. " "Zkontrolujte, zda není blokován nebo odstraněn antivirovým softwarem." -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "Kliknutím sem zobrazíte více informací" msgid "" @@ -4528,7 +4529,7 @@ msgstr "Měření přesnosti pohybu" msgid "Nozzle offset calibration" msgstr "Kalibrace offsetu trysky" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "Automatické vyrovnání podložky při vysoké teplotě" msgid "Auto Check: Quick Release Lever" @@ -5285,7 +5286,7 @@ msgstr "Zvětšit/Zmenšit oblast úprav" msgid "Sequence" msgstr "Sekvence" -msgid "object selection" +msgid "Object selection" msgstr "Výběr objektu" msgid "part selection" @@ -5294,7 +5295,7 @@ msgstr "Výběr části" msgid "number keys" msgstr "Číselné klávesy" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "Číselné klávesy mohou rychle změnit barvu objektů" msgid "" @@ -5540,7 +5541,7 @@ msgid "Only the object being edited is visible." msgstr "Viditelný je pouze objekt, který právě upravujete." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "Filamenty %s nelze tisknout přímo na povrch této podložky." msgid "" @@ -6862,7 +6863,7 @@ msgstr "" msgid "Upload failed\n" msgstr "Nahrávání selhalo\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "Získání instance_id selhalo\n" msgid "" @@ -7984,13 +7985,14 @@ msgstr "Uložit projekt" msgid "Importing Model" msgstr "Importovat model" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "Připravte soubor 3MF..." msgid "Download failed, unknown file format." msgstr "Stažení selhalo, neznámý formát souboru." -msgid "downloading project..." +msgid "Downloading project..." msgstr "Stahuji projekt..." msgid "Download failed, File size exception." @@ -8953,10 +8955,10 @@ msgstr "Hostitel PRE: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Produktový hostitel" -msgid "debug save button" +msgid "Debug save button" msgstr "Tlačítko pro uložení ladění" -msgid "save debug settings" +msgid "Save debug settings" msgstr "Uložit nastavení ladění" msgid "DEBUG settings have been saved successfully!" @@ -9260,7 +9262,7 @@ msgstr "" "*Automatický režim: Zkontrolujte kalibraci před tiskem. Přeskočte, pokud " "není nutné." -msgid "send completed" +msgid "Send complete" msgstr "Odeslání dokončeno" msgid "Error code" @@ -11259,7 +11261,7 @@ msgstr "Posunout výběr o 10 mm v kladném směru osy X" msgid "Movement step set to 1 mm" msgstr "Krok posunu výběru: 1 mm" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "Klávesy 1-9: nastavení filamentu pro objekt/díl" msgid "Camera view - Default" @@ -20238,7 +20240,7 @@ msgstr "Informace o trysce" msgid "Plate Type" msgstr "Typ podložky" -msgid "filament position" +msgid "Filament position" msgstr "Pozice filamentu" msgid "Filament For Calibration" @@ -22191,7 +22193,7 @@ msgstr "Žádné historické úlohy!" msgid "Upgrading" msgstr "Aktualizace" -msgid "syncing" +msgid "Syncing" msgstr "Synchronizace" msgid "Printing Finish" diff --git a/localization/i18n/de/OrcaSlicer_de.po b/localization/i18n/de/OrcaSlicer_de.po index 820e042626..2931d8d519 100644 --- a/localization/i18n/de/OrcaSlicer_de.po +++ b/localization/i18n/de/OrcaSlicer_de.po @@ -457,7 +457,7 @@ msgstr "Teile Koordinaten" msgid "Size" msgstr "Größe" -msgid "uniform scale" +msgid "Uniform scale" msgstr "einheitliche Skalierung" msgid "Planar" @@ -720,7 +720,7 @@ msgstr "Verbinder" msgid "Cut by Plane" msgstr "Schnitt durch Ebene" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" "Nicht-manifold Kanten durch Schneidwerkzeug verursacht, möchten Sie es jetzt " "beheben?" @@ -2302,31 +2302,31 @@ msgstr "Zusammenführen mit" msgid "Select All" msgstr "Alle auswählen" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "Alle Objekte auf der aktuellen Druckplatte auswählen" msgid "Delete All" msgstr "Alles löschen" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "Alle Objekte auf der aktuellen Druckplatte löschen" msgid "Arrange" msgstr "Anordnen" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "Aktuelle Druckplatte anordnen" msgid "Reload All" msgstr "Alles neu laden" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "Alles von der Festplatte neu laden" msgid "Auto Rotate" msgstr "Automatisch rotieren" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "Aktuelle Druckplatte automatisch rotieren" msgid "Delete Plate" @@ -2655,7 +2655,8 @@ msgstr "Höhenbereich hinzufügen" msgid "Invalid numeric." msgstr "Ungültige Zahl." -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "" "eine Zelle kann nur in eine oder mehrere Zellen in derselben Spalte kopiert " "werden" @@ -3878,7 +3879,7 @@ msgstr "" "Die Installation des Plugins ist fehlgeschlagen. Bitte prüfen Sie, ob es von " "einer Antiviren-Software blockiert oder gelöscht wurde." -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "Klicken Sie hier, um weitere Informationen zu erhalten" msgid "" @@ -4442,7 +4443,7 @@ msgstr "Messung der Bewegungsgenauigkeit" msgid "Nozzle offset calibration" msgstr "Kalibrierung des Düsenversatzes" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "Automatische Druckbettnivellierung bei hoher Temperatur" msgid "Auto Check: Quick Release Lever" @@ -5216,7 +5217,7 @@ msgstr "Bearbeitungsbereich vergrößern/verkleinern" msgid "Sequence" msgstr "Reihenfolge" -msgid "object selection" +msgid "Object selection" msgstr "Objektauswahl" msgid "part selection" @@ -5225,7 +5226,7 @@ msgstr "Teileauswahl" msgid "number keys" msgstr "Nummerntasten" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "Nummerntasten können schnell die Farbe von Objekten ändern." msgid "" @@ -5476,7 +5477,7 @@ msgid "Only the object being edited is visible." msgstr "Nur das bearbeitete Modell ist sichtbar." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" "Filament %s kann nicht direkt auf der Oberfläche dieser Druckplatte gedruckt " "werden." @@ -6807,7 +6808,7 @@ msgstr "" msgid "Upload failed\n" msgstr "Hochladen fehlgeschlagen\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "Abrufen der Instanz-ID fehlgeschlagen\n" #, fuzzy @@ -7918,13 +7919,14 @@ msgstr "Projekt speichern" msgid "Importing Model" msgstr "Modell importieren" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "3MF-Datei vorbereiten…" msgid "Download failed, unknown file format." msgstr "Download fehlgeschlagen, unbekanntes Dateiformat." -msgid "downloading project..." +msgid "Downloading project..." msgstr "Projekt wird heruntergeladen..." msgid "Download failed, File size exception." @@ -8884,10 +8886,10 @@ msgstr "PRE host: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Produkt Moderator" -msgid "debug save button" +msgid "Debug save button" msgstr "Debug Speicher-Taste" -msgid "save debug settings" +msgid "Save debug settings" msgstr "Debug-Einstellungen speichern" msgid "DEBUG settings have been saved successfully!" @@ -9196,7 +9198,7 @@ msgstr "" "*Automatikmodus: Überprüfen Sie die Kalibrierung vor dem Drucken. " "Überspringen, wenn nicht erforderlich." -msgid "send completed" +msgid "Send complete" msgstr "Senden abgeschlossen" msgid "Error code" @@ -11193,7 +11195,7 @@ msgstr "Auswahl 10 mm in positiver X-Richtung verschieben" msgid "Movement step set to 1 mm" msgstr "Bewegungsschritt auf 1 mm eingestellt" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "Tastatur 1-9: Filament für Objekt/Teil einstellen" msgid "Camera view - Default" @@ -19913,7 +19915,7 @@ msgstr "Düseninfo" msgid "Plate Type" msgstr "Druckbetttyp" -msgid "filament position" +msgid "Filament position" msgstr "Filamentposition" msgid "Filament For Calibration" @@ -21904,7 +21906,7 @@ msgstr "Keine historischen Aufgaben!" msgid "Upgrading" msgstr "Aktualisieren" -msgid "syncing" +msgid "Syncing" msgstr "synchronisieren" msgid "Printing Finish" diff --git a/localization/i18n/en/OrcaSlicer_en.po b/localization/i18n/en/OrcaSlicer_en.po index 4cc759ce18..7b58808efd 100644 --- a/localization/i18n/en/OrcaSlicer_en.po +++ b/localization/i18n/en/OrcaSlicer_en.po @@ -425,8 +425,8 @@ msgstr "" msgid "Size" msgstr "" -msgid "uniform scale" -msgstr "Uniform scale" +msgid "Uniform scale" +msgstr "" msgid "Planar" msgstr "" @@ -680,7 +680,7 @@ msgstr "" msgid "Cut by Plane" msgstr "" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "Non-manifold edges be caused by cut tool: do you want to fix now?" msgid "Repairing model object" @@ -2173,32 +2173,32 @@ msgstr "" msgid "Select All" msgstr "" -msgid "select all objects on current plate" -msgstr "Select all objects on the current plate" +msgid "Select all objects on the current plate" +msgstr "" msgid "Delete All" msgstr "" -msgid "delete all objects on current plate" -msgstr "Delete all objects on the current plate" +msgid "Delete all objects on the current plate" +msgstr "" msgid "Arrange" msgstr "" -msgid "arrange current plate" -msgstr "Arrange current plate" +msgid "Arrange current plate" +msgstr "" msgid "Reload All" msgstr "" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "" msgid "Auto Rotate" msgstr "" -msgid "auto rotate current plate" -msgstr "Auto rotate current plate" +msgid "Auto rotate current plate" +msgstr "" msgid "Delete Plate" msgstr "" @@ -2504,8 +2504,8 @@ msgstr "" msgid "Invalid numeric." msgstr "" -msgid "one cell can only be copied to one or multiple cells in the same column" -msgstr "One cell can only be copied to one or more cells in the same column." +msgid "One cell can only be copied to one or more cells in the same column." +msgstr "" msgid "Copying multiple cells is not supported." msgstr "" @@ -3591,7 +3591,7 @@ msgstr "" "Failed to install the plug-in. Please check whether it is blocked or has " "been deleted by anti-virus software." -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "" msgid "" @@ -4075,7 +4075,7 @@ msgstr "" msgid "Nozzle offset calibration" msgstr "" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "" msgid "Auto Check: Quick Release Lever" @@ -4697,7 +4697,7 @@ msgid "Options" msgstr "" msgid "travel" -msgstr "Travel" +msgstr "" msgid "Extruder" msgstr "" @@ -4793,7 +4793,7 @@ msgstr "" msgid "Sequence" msgstr "" -msgid "object selection" +msgid "Object selection" msgstr "" msgid "part selection" @@ -4802,7 +4802,7 @@ msgstr "" msgid "number keys" msgstr "" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "" msgid "" @@ -5032,7 +5032,7 @@ msgid "Only the object being edited is visible." msgstr "" #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "" @@ -6005,10 +6005,10 @@ msgid "Name is invalid;" msgstr "" msgid "illegal characters:" -msgstr "Illegal characters:" +msgstr "" msgid "illegal suffix:" -msgstr "Illegal suffix:" +msgstr "" msgid "The name is not allowed to be empty." msgstr "The name field is not allowed to be empty." @@ -6268,8 +6268,8 @@ msgstr "" msgid "Upload failed\n" msgstr "" -msgid "obtaining instance_id failed\n" -msgstr "Obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" +msgstr "" msgid "" "Your comment result cannot be uploaded due to the following reasons:\n" @@ -7260,13 +7260,13 @@ msgstr "" msgid "Importing Model" msgstr "" -msgid "prepare 3MF file..." -msgstr "preparing 3MF file..." +msgid "Preparing 3MF file..." +msgstr "" msgid "Download failed, unknown file format." msgstr "Download failed; unknown file format." -msgid "downloading project..." +msgid "Downloading project..." msgstr "" msgid "Download failed, File size exception." @@ -8122,10 +8122,10 @@ msgstr "" msgid "Product host" msgstr "" -msgid "debug save button" -msgstr "Debug save button" +msgid "Debug save button" +msgstr "" -msgid "save debug settings" +msgid "Save debug settings" msgstr "" msgid "DEBUG settings have been saved successfully!" @@ -8414,8 +8414,8 @@ msgid "" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -msgid "send completed" -msgstr "Send complete" +msgid "Send complete" +msgstr "" msgid "Error code" msgstr "" @@ -10110,7 +10110,7 @@ msgstr "Move selection 10mm in positive X direction" msgid "Movement step set to 1 mm" msgstr "Movement step set to 1mm" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "Keyboard 1-9: set filament for object/part" msgid "Camera view - Default" @@ -17086,7 +17086,7 @@ msgstr "" msgid "Plate Type" msgstr "" -msgid "filament position" +msgid "Filament position" msgstr "" msgid "Filament For Calibration" @@ -18750,7 +18750,7 @@ msgstr "" msgid "Upgrading" msgstr "" -msgid "syncing" +msgid "Syncing" msgstr "" msgid "Printing Finish" diff --git a/localization/i18n/es/OrcaSlicer_es.po b/localization/i18n/es/OrcaSlicer_es.po index dac79ab66d..08698d7697 100644 --- a/localization/i18n/es/OrcaSlicer_es.po +++ b/localization/i18n/es/OrcaSlicer_es.po @@ -455,7 +455,7 @@ msgstr "Coordenadas de la pieza" msgid "Size" msgstr "Tamaño" -msgid "uniform scale" +msgid "Uniform scale" msgstr "escala uniforme" msgid "Planar" @@ -715,7 +715,7 @@ msgstr "Conector" msgid "Cut by Plane" msgstr "Corte por Plano" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" "La operación de corte ha resultado en bordes no plegados, ¿Desea repararlos " "ahora?" @@ -2310,31 +2310,31 @@ msgstr "Fusionar con" msgid "Select All" msgstr "Seleccionar Todo" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "Seleccionar todos los objetos de la bandeja actual" msgid "Delete All" msgstr "Borrar todo" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "Eliminar todos los objetos de la bandeja actual" msgid "Arrange" msgstr "Organizar" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "organizar la bandeja actual" msgid "Reload All" msgstr "Recargar todo" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "Recargar todo desde disco" msgid "Auto Rotate" msgstr "Rotación Automática" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "auto rotar la bandeja actual" msgid "Delete Plate" @@ -2660,7 +2660,8 @@ msgstr "Añadir rango de altura" msgid "Invalid numeric." msgstr "Numérico inválido." -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "" "una celda sólo puede copiarse en una o varias celdas de la misma columna" @@ -3876,7 +3877,7 @@ msgstr "" "Fallo al instalar el complemento. Por favor, compruebe si ha sido bloqueado o " "borrado por un antivirus." -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "Presiona aquí para mostrar más información" msgid "" @@ -4436,7 +4437,7 @@ msgstr "Medir la precisión del movimiento" msgid "Nozzle offset calibration" msgstr "Calibración del desplazamiento de la boquilla" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "Nivelación automática de la cama a alta temperatura" msgid "Auto Check: Quick Release Lever" @@ -5207,7 +5208,7 @@ msgstr "Incrementar/disminuir el área de edición" msgid "Sequence" msgstr "Secuencia" -msgid "object selection" +msgid "Object selection" msgstr "Selección de objetos" msgid "part selection" @@ -5216,7 +5217,7 @@ msgstr "Selección de partes" msgid "number keys" msgstr "Teclas numéricas" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "Las teclas numéricas pueden cambiar rápidamente el color de los objetos" msgid "" @@ -5463,7 +5464,7 @@ msgid "Only the object being edited is visible." msgstr "Sólo es visible el objeto que se está editando." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" "Los filamentos %s no pueden imprimirse directamente en la superficie de esta " "bandeja." @@ -6782,7 +6783,7 @@ msgstr "" msgid "Upload failed\n" msgstr "Carga fallida\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "Error al obtener instance_id \n" msgid "" @@ -7880,13 +7881,14 @@ msgstr "Guardar proyecto" msgid "Importing Model" msgstr "Importando modelo" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "Preparar el archivo 3MF..." msgid "Download failed, unknown file format." msgstr "Descarga fallida; formato de archivo desconocido." -msgid "downloading project..." +msgid "Downloading project..." msgstr "Descargando proyecto..." msgid "Download failed, File size exception." @@ -8848,10 +8850,10 @@ msgstr "PRE host: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Cliente de producto" -msgid "debug save button" +msgid "Debug save button" msgstr "botón de guardar la depuración" -msgid "save debug settings" +msgid "Save debug settings" msgstr "guardar los ajustes de depuración" msgid "DEBUG settings have been saved successfully!" @@ -9156,7 +9158,7 @@ msgstr "" "*Modo automático: Compruebe la calibración antes de imprimir. Omitir si no es " "necesario." -msgid "send completed" +msgid "Send complete" msgstr "Envío completo" msgid "Error code" @@ -11133,7 +11135,7 @@ msgstr "Mover la selección 10 mm en dirección X positiva" msgid "Movement step set to 1 mm" msgstr "Paso de movimiento configurado a 1 mm" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "teclado 1-9: ajustar el filamento para el objeto/pieza" msgid "Camera view - Default" @@ -19790,7 +19792,7 @@ msgstr "Información de boquilla" msgid "Plate Type" msgstr "Tipo de Bandeja" -msgid "filament position" +msgid "Filament position" msgstr "Posición de filamento" msgid "Filament For Calibration" @@ -21786,7 +21788,7 @@ msgstr "Sin tareas históricas" msgid "Upgrading" msgstr "Actualizando" -msgid "syncing" +msgid "Syncing" msgstr "Sincronizando" msgid "Printing Finish" diff --git a/localization/i18n/fr/OrcaSlicer_fr.po b/localization/i18n/fr/OrcaSlicer_fr.po index 4cf6723bdb..039dae4094 100644 --- a/localization/i18n/fr/OrcaSlicer_fr.po +++ b/localization/i18n/fr/OrcaSlicer_fr.po @@ -436,7 +436,7 @@ msgstr "" msgid "Size" msgstr "Taille" -msgid "uniform scale" +msgid "Uniform scale" msgstr "échelle uniforme" msgid "Planar" @@ -696,7 +696,7 @@ msgstr "Connecteur" msgid "Cut by Plane" msgstr "Coupe par plan" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" "les bords non pliables sont dus à l’outil de coupe, voulez-vous les corriger " "maintenant ?" @@ -2283,31 +2283,31 @@ msgstr "" msgid "Select All" msgstr "Tout sélectionner" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "sélectionner tous les objets sur la plaque actuelle" msgid "Delete All" msgstr "Tout Supprimer" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "supprimer tous les objets sur la plaque actuelle" msgid "Arrange" msgstr "Organiser" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "organiser la plaque actuelle" msgid "Reload All" msgstr "Tout recharger" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "tout recharger à partir du disque" msgid "Auto Rotate" msgstr "Rotation automatique" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "rotation automatique de la plaque actuelle" msgid "Delete Plate" @@ -2629,7 +2629,8 @@ msgstr "Ajouter une plage de hauteur" msgid "Invalid numeric." msgstr "Chiffre non valide." -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "" "une cellule ne peut être copiée que dans une ou plusieurs cellules de la " "même colonne" @@ -3782,7 +3783,7 @@ msgstr "" "Échec de l'installation du plug-in. Veuillez vérifier s'il est bloqué ou " "s'il a été supprimé par un logiciel anti-virus." -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "cliquez ici pour voir plus d'informations" msgid "" @@ -4320,7 +4321,7 @@ msgstr "" msgid "Nozzle offset calibration" msgstr "" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "" msgid "Auto Check: Quick Release Lever" @@ -5048,7 +5049,7 @@ msgstr "Augmenter/diminuer la zone d'édition" msgid "Sequence" msgstr "Séquence" -msgid "object selection" +msgid "Object selection" msgstr "" msgid "part selection" @@ -5057,7 +5058,7 @@ msgstr "" msgid "number keys" msgstr "" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "" msgid "" @@ -5289,7 +5290,7 @@ msgid "Only the object being edited is visible." msgstr "Seul l'objet en cours d'édition est visible." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "" @@ -6586,7 +6587,7 @@ msgstr "" msgid "Upload failed\n" msgstr "Échec de l’envoi\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "échec de l’obtention de l’instance_id\n" msgid "" @@ -7623,13 +7624,14 @@ msgstr "Sauvegarder le projet" msgid "Importing Model" msgstr "Importation du modèle" -msgid "prepare 3MF file..." -msgstr "" +#, fuzzy +msgid "Preparing 3MF file..." +msgstr "préparation du fichier 3mf..." msgid "Download failed, unknown file format." msgstr "Échec du téléchargement, format de fichier inconnu." -msgid "downloading project..." +msgid "Downloading project..." msgstr "téléchargement du projet..." msgid "Download failed, File size exception." @@ -8543,10 +8545,10 @@ msgstr "Hébergeur PRE : api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Hôte du produit" -msgid "debug save button" +msgid "Debug save button" msgstr "bouton d'enregistrement de débogage" -msgid "save debug settings" +msgid "Save debug settings" msgstr "enregistrer les paramètres de débogage" msgid "DEBUG settings have been saved successfully!" @@ -8843,7 +8845,7 @@ msgid "" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -msgid "send completed" +msgid "Send complete" msgstr "envoi terminé" msgid "Error code" @@ -10737,7 +10739,7 @@ msgstr "Déplacer la sélection de 10 mm dans la direction positive X" msgid "Movement step set to 1 mm" msgstr "Pas du mouvement réglé sur 1 mm" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "clavier 1-9 : définir le filament pour l'objet/la pièce" msgid "Camera view - Default" @@ -19207,7 +19209,7 @@ msgstr "" msgid "Plate Type" msgstr "Type de plaque" -msgid "filament position" +msgid "Filament position" msgstr "position du filament" msgid "Filament For Calibration" @@ -21086,7 +21088,7 @@ msgstr "Aucune tâche historique !" msgid "Upgrading" msgstr "Mise à jour" -msgid "syncing" +msgid "Syncing" msgstr "synchronisation" msgid "Printing Finish" @@ -21822,9 +21824,6 @@ msgstr "" #~ "Le nom des composants à l'intérieur du fichier .step n'est pas au format " #~ "UTF8 !" -#~ msgid "prepare 3mf file..." -#~ msgstr "préparation du fichier 3mf..." - #~ msgid "" #~ "Should printer/filament/process settings be loaded when opening a .3mf?" #~ msgstr "" diff --git a/localization/i18n/hu/OrcaSlicer_hu.po b/localization/i18n/hu/OrcaSlicer_hu.po index 752db98cf5..38507a1c84 100644 --- a/localization/i18n/hu/OrcaSlicer_hu.po +++ b/localization/i18n/hu/OrcaSlicer_hu.po @@ -428,7 +428,7 @@ msgstr "" msgid "Size" msgstr "Méret" -msgid "uniform scale" +msgid "Uniform scale" msgstr "egységes méretarány" msgid "Planar" @@ -683,7 +683,7 @@ msgstr "Connector" msgid "Cut by Plane" msgstr "Vágás Síkkal" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "A vágás után hibás élek keletkeztek, szeretnéd most javítani őket?" msgid "Repairing model object" @@ -2195,31 +2195,31 @@ msgstr "" msgid "Select All" msgstr "Összes kijelölése" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "az aktuális tálca összes objektumának kijelölése" msgid "Delete All" msgstr "Összes törlése" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "az aktuális tálca összes objektumának törlése" msgid "Arrange" msgstr "Elrendezés" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "aktuális tálca elrendezése" msgid "Reload All" msgstr "" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "" msgid "Auto Rotate" msgstr "Automatikus forgatás" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "aktuális tálca automatikus forgatása" msgid "Delete Plate" @@ -2532,7 +2532,8 @@ msgstr "" msgid "Invalid numeric." msgstr "Érvénytelen számjegy." -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "" "egy cellát csak az ugyanabban az oszlopban lévő egy vagy több cellába lehet " "másolni" @@ -3654,7 +3655,7 @@ msgstr "" "Nem sikerült telepíteni a bővítményt. Kérjük, ellenőrizd, hogy a vírusirtó " "szoftver nem blokkolta vagy törölte-e." -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "kattints ide további információkért" msgid "" @@ -4172,7 +4173,7 @@ msgstr "" msgid "Nozzle offset calibration" msgstr "" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "" msgid "Auto Check: Quick Release Lever" @@ -4895,7 +4896,7 @@ msgstr "Szerkesztési terület növelése/csökkentése" msgid "Sequence" msgstr "Sorrend" -msgid "object selection" +msgid "Object selection" msgstr "" msgid "part selection" @@ -4904,7 +4905,7 @@ msgstr "" msgid "number keys" msgstr "" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "" msgid "" @@ -5134,7 +5135,7 @@ msgid "Only the object being edited is visible." msgstr "Csak az éppen szerkesztett objektum látható." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "" @@ -6391,7 +6392,7 @@ msgstr "Nyomtatási eredmények szinkronizálása. Kérjük, próbáld újra ké msgid "Upload failed\n" msgstr "Feltöltés sikertelen\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "Az instance_id beszerzése sikertelen\n" msgid "" @@ -7408,13 +7409,14 @@ msgstr "Projekt mentése" msgid "Importing Model" msgstr "Modell importálása" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "3mf fájl előkészítése..." msgid "Download failed, unknown file format." msgstr "" -msgid "downloading project..." +msgid "Downloading project..." msgstr "projekt letöltése ..." msgid "Download failed, File size exception." @@ -8283,10 +8285,10 @@ msgstr "PRE host: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Product host" -msgid "debug save button" +msgid "Debug save button" msgstr "debug mentés gomb" -msgid "save debug settings" +msgid "Save debug settings" msgstr "hibakeresési beállítások mentése" msgid "DEBUG settings have been saved successfully!" @@ -8576,7 +8578,7 @@ msgid "" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -msgid "send completed" +msgid "Send complete" msgstr "küldés befejezve" msgid "Error code" @@ -10337,7 +10339,7 @@ msgstr "Kijelölés mozgatása 10 mm-rel pozitív X irányban" msgid "Movement step set to 1 mm" msgstr "Mozgatás lépéstávolsága 1mm-re állítva" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "filament hozzárendelése az objektumhoz/tárgyhoz" msgid "Camera view - Default" @@ -17517,7 +17519,7 @@ msgstr "" msgid "Plate Type" msgstr "" -msgid "filament position" +msgid "Filament position" msgstr "filamentpozíció" msgid "Filament For Calibration" @@ -19233,7 +19235,7 @@ msgstr "" msgid "Upgrading" msgstr "" -msgid "syncing" +msgid "Syncing" msgstr "" msgid "Printing Finish" diff --git a/localization/i18n/it/OrcaSlicer_it.po b/localization/i18n/it/OrcaSlicer_it.po index c63be142e6..5fcf561e2c 100644 --- a/localization/i18n/it/OrcaSlicer_it.po +++ b/localization/i18n/it/OrcaSlicer_it.po @@ -432,7 +432,7 @@ msgstr "" msgid "Size" msgstr "Dimensioni" -msgid "uniform scale" +msgid "Uniform scale" msgstr "scala uniforme" msgid "Planar" @@ -693,7 +693,7 @@ msgstr "Connettore" msgid "Cut by Plane" msgstr "Taglio per piano" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" "lo strumento Taglia ha generato geometrie con spessore zero, vuoi risolvere " "il problema ora?" @@ -2275,31 +2275,31 @@ msgstr "" msgid "Select All" msgstr "Seleziona tutto" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "seleziona tutti gli oggetti sul piatto corrente" msgid "Delete All" msgstr "Elimina tutto" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "elimina tutti gli oggetti sul piatto corrente" msgid "Arrange" msgstr "Disponi" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "disponi sul piatto corrente" msgid "Reload All" msgstr "Ricarica tutto" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "ricarica tutto dal disco" msgid "Auto Rotate" msgstr "Rotazione automatica" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "rotazione automatica piatto corrente" msgid "Delete Plate" @@ -2624,7 +2624,8 @@ msgstr "Aggiungi intervallo di altezza" msgid "Invalid numeric." msgstr "Numero non valido." -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "" "una cella può essere copiata solo in una o più celle della stessa colonna" @@ -3778,7 +3779,7 @@ msgstr "" "Impossibile installare il modulo. Verificare se è bloccato o se è stato " "eliminato dall'antivirus." -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "clicca per ulteriori informazioni" msgid "" @@ -4322,7 +4323,7 @@ msgstr "" msgid "Nozzle offset calibration" msgstr "" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "" msgid "Auto Check: Quick Release Lever" @@ -5051,7 +5052,7 @@ msgstr "Aumenta/diminuisci l'area di modifica" msgid "Sequence" msgstr "Sequenza" -msgid "object selection" +msgid "Object selection" msgstr "" msgid "part selection" @@ -5060,7 +5061,7 @@ msgstr "" msgid "number keys" msgstr "" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "" msgid "" @@ -5292,7 +5293,7 @@ msgid "Only the object being edited is visible." msgstr "È visibile solo l'oggetto da modificare." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "" @@ -6572,7 +6573,7 @@ msgstr "Sincronizzazione dei risultati di stampa. Riprova tra qualche secondo." msgid "Upload failed\n" msgstr "Caricamento non riuscito\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "ottenimento di instance_id non riuscito\n" msgid "" @@ -7618,13 +7619,14 @@ msgstr "Salva progetto" msgid "Importing Model" msgstr "Importazione del modello" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "preparazione file 3MF..." msgid "Download failed, unknown file format." msgstr "Scaricamento non riuscito; formato file sconosciuto." -msgid "downloading project..." +msgid "Downloading project..." msgstr "scaricamento progetto..." msgid "Download failed, File size exception." @@ -8528,10 +8530,10 @@ msgstr "PRE host: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Host del prodotto" -msgid "debug save button" +msgid "Debug save button" msgstr "pulsante salvataggio debug" -msgid "save debug settings" +msgid "Save debug settings" msgstr "salva impostazioni debug" msgid "DEBUG settings have been saved successfully!" @@ -8824,7 +8826,7 @@ msgid "" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -msgid "send completed" +msgid "Send complete" msgstr "invio completato" msgid "Error code" @@ -10695,7 +10697,7 @@ msgstr "Sposta selezione di 10 mm in direzione X positiva" msgid "Movement step set to 1 mm" msgstr "Passo movimento impostato a 1 mm" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "tastiera 1-9: imposta il filamento per l'oggetto/parte" msgid "Camera view - Default" @@ -19146,7 +19148,7 @@ msgstr "" msgid "Plate Type" msgstr "Tipo di piatto" -msgid "filament position" +msgid "Filament position" msgstr "posizione del filamento" msgid "Filament For Calibration" @@ -21009,7 +21011,7 @@ msgstr "Nessuna cronologia delle attività!" msgid "Upgrading" msgstr "Aggiornamento" -msgid "syncing" +msgid "Syncing" msgstr "sincronizzazione" msgid "Printing Finish" diff --git a/localization/i18n/ja/OrcaSlicer_ja.po b/localization/i18n/ja/OrcaSlicer_ja.po index f3afb40d6e..401b9349f1 100644 --- a/localization/i18n/ja/OrcaSlicer_ja.po +++ b/localization/i18n/ja/OrcaSlicer_ja.po @@ -426,7 +426,7 @@ msgstr "" msgid "Size" msgstr "サイズ" -msgid "uniform scale" +msgid "Uniform scale" msgstr "スケール" msgid "Planar" @@ -684,8 +684,8 @@ msgstr "" msgid "Cut by Plane" msgstr "面でカット" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" -msgstr "Non-manifold edges be caused by cut tool: do you want to fix now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" +msgstr "" msgid "Repairing model object" msgstr "モデルオブジェクトを修復" @@ -2204,31 +2204,31 @@ msgstr "" msgid "Select All" msgstr "全てを選択" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "現在のプレート上のすべてのオブジェクトを選択" msgid "Delete All" msgstr "全てを削除" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "現在のプレート上の全てのオブジェクトを削除" msgid "Arrange" msgstr "レイアウト" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "現在のプレートをレイアウト" msgid "Reload All" msgstr "全て再読み込み" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "全てディスクから再読み込み" msgid "Auto Rotate" msgstr "自動回転" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "現在のプレートを自動回転させる" msgid "Delete Plate" @@ -2529,7 +2529,8 @@ msgstr "" msgid "Invalid numeric." msgstr "無効な数値" -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "一つのセルは、同じ列のセルにしかコピーできません" msgid "Copying multiple cells is not supported." @@ -3615,7 +3616,7 @@ msgid "" "by anti-virus software." msgstr "プラグインをインストールできませんでした。ご確認ください。" -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "詳しくはこちら" msgid "" @@ -4113,7 +4114,7 @@ msgstr "" msgid "Nozzle offset calibration" msgstr "" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "" msgid "Auto Check: Quick Release Lever" @@ -4833,7 +4834,7 @@ msgstr "編集領域を拡大/縮小" msgid "Sequence" msgstr "順番" -msgid "object selection" +msgid "Object selection" msgstr "" msgid "part selection" @@ -4842,7 +4843,7 @@ msgstr "" msgid "number keys" msgstr "" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "" msgid "" @@ -5072,7 +5073,7 @@ msgid "Only the object being edited is visible." msgstr "編集中のオブジェクトのみ表示されます" #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "" @@ -6306,7 +6307,7 @@ msgstr "" msgid "Upload failed\n" msgstr "" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "" msgid "" @@ -7299,13 +7300,14 @@ msgstr "プロジェクトを保存" msgid "Importing Model" msgstr "モデルをインポート" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "3mfファイルを準備" msgid "Download failed, unknown file format." msgstr "" -msgid "downloading project..." +msgid "Downloading project..." msgstr "プロジェクトをダウンロード中" msgid "Download failed, File size exception." @@ -8164,10 +8166,10 @@ msgstr "PRE ホスト: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "PRODホスト" -msgid "debug save button" +msgid "Debug save button" msgstr "保存" -msgid "save debug settings" +msgid "Save debug settings" msgstr "デバッグ設定を保存" msgid "DEBUG settings have been saved successfully!" @@ -8457,7 +8459,7 @@ msgid "" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -msgid "send completed" +msgid "Send complete" msgstr "送信完了" msgid "Error code" @@ -10163,7 +10165,7 @@ msgstr "X方向 10mm" msgid "Movement step set to 1 mm" msgstr "移動ステップを1mmに設定" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "キー1-9: オブジェクト/パーツのフィラメントを設定" msgid "Camera view - Default" @@ -17212,7 +17214,7 @@ msgstr "" msgid "Plate Type" msgstr "" -msgid "filament position" +msgid "Filament position" msgstr "" msgid "Filament For Calibration" @@ -18851,7 +18853,7 @@ msgstr "" msgid "Upgrading" msgstr "" -msgid "syncing" +msgid "Syncing" msgstr "" msgid "Printing Finish" diff --git a/localization/i18n/ko/OrcaSlicer_ko.po b/localization/i18n/ko/OrcaSlicer_ko.po index 6b95400311..fd77dda263 100644 --- a/localization/i18n/ko/OrcaSlicer_ko.po +++ b/localization/i18n/ko/OrcaSlicer_ko.po @@ -435,7 +435,7 @@ msgstr "" msgid "Size" msgstr "크기" -msgid "uniform scale" +msgid "Uniform scale" msgstr "균일 배율" msgid "Planar" @@ -693,7 +693,7 @@ msgstr "커넥터" msgid "Cut by Plane" msgstr "평면으로 자르기" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" "절단 도구로 인해 메인폴드가 아닌 가장자리가 발생했는데 지금 수정하시겠습니까?" @@ -2232,31 +2232,31 @@ msgstr "" msgid "Select All" msgstr "모두 선택" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "현재 플레이트의 모든 객체 선택" msgid "Delete All" msgstr "모두 삭제" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "현재 플레이트의 모든 객체 삭제" msgid "Arrange" msgstr "정렬" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "현재 플레이트 정렬" msgid "Reload All" msgstr "모두 다시 불러오기" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "디스크에서 모두 다시 로드" msgid "Auto Rotate" msgstr "자동 회전" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "현재 플레이트 자동 정렬" msgid "Delete Plate" @@ -2562,7 +2562,8 @@ msgstr "높이 범위 추가" msgid "Invalid numeric." msgstr "잘못된 숫자입니다." -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "하나의 셀은 동일한 열에 있는 하나 이상의 셀에만 복사할 수 있습니다" msgid "Copying multiple cells is not supported." @@ -3680,7 +3681,7 @@ msgstr "" "플러그인을 설치하지 못했습니다. 안티바이러스 소프트웨어에 의해 차단 또는 삭제" "되었는지 확인하세요." -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "자세한 내용을 보려면 여기를 클릭하세요" msgid "" @@ -4195,7 +4196,7 @@ msgstr "" msgid "Nozzle offset calibration" msgstr "" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "" msgid "Auto Check: Quick Release Lever" @@ -4919,7 +4920,7 @@ msgstr "편집 영역 증가/감소" msgid "Sequence" msgstr "순서" -msgid "object selection" +msgid "Object selection" msgstr "" msgid "part selection" @@ -4928,7 +4929,7 @@ msgstr "" msgid "number keys" msgstr "" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "" msgid "" @@ -5160,7 +5161,7 @@ msgid "Only the object being edited is visible." msgstr "편집 중인 객체만 표시됩니다." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "" @@ -6419,7 +6420,7 @@ msgstr "출력 결과를 동기화하는 중입니다. 몇 초 후에 다시 시 msgid "Upload failed\n" msgstr "업로드 실패\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "instance_id를 가져오지 못했습니다.\n" msgid "" @@ -7444,13 +7445,14 @@ msgstr "프로젝트 저장" msgid "Importing Model" msgstr "모델 가져오는 중" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "3mf 파일 준비..." msgid "Download failed, unknown file format." msgstr "다운로드에 실패했습니다. 파일 형식을 알 수 없습니다." -msgid "downloading project..." +msgid "Downloading project..." msgstr "프로젝트 다운로드 중 ..." msgid "Download failed, File size exception." @@ -8332,10 +8334,10 @@ msgstr "PRE host: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "제품 호스트" -msgid "debug save button" +msgid "Debug save button" msgstr "디버그 저장 버튼" -msgid "save debug settings" +msgid "Save debug settings" msgstr "디버그 설정 저장" msgid "DEBUG settings have been saved successfully!" @@ -8625,7 +8627,7 @@ msgid "" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -msgid "send completed" +msgid "Send complete" msgstr "전송 완료" msgid "Error code" @@ -10417,7 +10419,7 @@ msgstr "선택 항목을 +X 방향으로 10mm 이동" msgid "Movement step set to 1 mm" msgstr "1mm로 이동" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "키보드 1-9: 객체/부품에 필라멘트 할당" msgid "Camera view - Default" @@ -18270,7 +18272,7 @@ msgstr "" msgid "Plate Type" msgstr "플레이트 타입" -msgid "filament position" +msgid "Filament position" msgstr "필라멘트 위치" msgid "Filament For Calibration" @@ -20052,7 +20054,7 @@ msgstr "작업 내역이 없습니다!" msgid "Upgrading" msgstr "업그레이드 하기" -msgid "syncing" +msgid "Syncing" msgstr "동기화" msgid "Printing Finish" diff --git a/localization/i18n/lt/OrcaSlicer_lt.po b/localization/i18n/lt/OrcaSlicer_lt.po index e5790f7d3f..79d174b86c 100644 --- a/localization/i18n/lt/OrcaSlicer_lt.po +++ b/localization/i18n/lt/OrcaSlicer_lt.po @@ -438,7 +438,7 @@ msgstr "Detalės koordinatės" msgid "Size" msgstr "Dydis" -msgid "uniform scale" +msgid "Uniform scale" msgstr "vienoda skalė" msgid "Planar" @@ -700,7 +700,7 @@ msgstr "Jungtis" msgid "Cut by Plane" msgstr "Iškirpti su plokštuma" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" "netinkami kraštai atsirado dėl pjovimo įrankio. Ar norite sutvarkyti dabar?" @@ -2256,31 +2256,31 @@ msgstr "" msgid "Select All" msgstr "Pasirinkti viską" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "pasirinkti visus objektus pasirinktoje plokštėje" msgid "Delete All" msgstr "Ištrinti visus" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "ištrinti visus objektus pasirinktoje plokštėje" msgid "Arrange" msgstr "Išdėstyti" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "išdėstyti dabartinės plokštės objektus" msgid "Reload All" msgstr "Pakartotinai užkrauti viską" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "dar kartą užkrauti viską iš disko" msgid "Auto Rotate" msgstr "Automatinis pasukimas" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "utomatiškai pasukti dabartinę plokštę" msgid "Delete Plate" @@ -2608,7 +2608,8 @@ msgstr "Pridėti aukščio ribas" msgid "Invalid numeric." msgstr "Netinkamas skaičius." -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "" "vieną langelį galima nukopijuoti tik į vieną ar daugiau to paties stulpelio " "langelių" @@ -3747,7 +3748,7 @@ msgstr "" "Nepavyko įdiegti papildinio. Patikrinkite, ar jo neblokuoja arba neištrina " "antivirusinė programinė įranga." -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "spustelėkite norėdami gauti daugiau informacijos" msgid "" @@ -4293,7 +4294,7 @@ msgstr "" msgid "Nozzle offset calibration" msgstr "" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "" msgid "Auto Check: Quick Release Lever" @@ -5031,7 +5032,7 @@ msgstr "Padidinti / sumažinti redagavimo sritį" msgid "Sequence" msgstr "Seka" -msgid "object selection" +msgid "Object selection" msgstr "objekto pasirinkimas" msgid "part selection" @@ -5040,7 +5041,7 @@ msgstr "detalės pasirinkimas" msgid "number keys" msgstr "skaičių klavišai" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "skaičių klavišais galima greitai pakeisti objektų spalvą" msgid "" @@ -5272,7 +5273,7 @@ msgid "Only the object being edited is visible." msgstr "Matomas tik redaguojamas objektas." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "" @@ -6555,7 +6556,7 @@ msgstr "" msgid "Upload failed\n" msgstr "Įkėlimas nepavyko\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "nepavyko gauti instance_id\n" msgid "" @@ -7600,13 +7601,14 @@ msgstr "Išsaugoti projektą" msgid "Importing Model" msgstr "Importuojamas modelis" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "paruošti 3MF failą..." msgid "Download failed, unknown file format." msgstr "Atsisuntimas nepavyko, nežinomas failo tipas." -msgid "downloading project..." +msgid "Downloading project..." msgstr "projektas atsisiunčiamas..." msgid "Download failed, File size exception." @@ -8512,10 +8514,10 @@ msgstr "PRE hostas: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Produkto hostas" -msgid "debug save button" +msgid "Debug save button" msgstr "derinimo išsaugojimo mygtukas" -msgid "save debug settings" +msgid "Save debug settings" msgstr "išsaugoti testavimo nuostatas" msgid "DEBUG settings have been saved successfully!" @@ -8808,7 +8810,7 @@ msgid "" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -msgid "send completed" +msgid "Send complete" msgstr "siuntimas baigtas" msgid "Error code" @@ -10677,7 +10679,7 @@ msgstr "Perkelti pasirinktą10 mm teigiama X kryptimi" msgid "Movement step set to 1 mm" msgstr "Judėjimo žingsnis nustatytas į 1 mm" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "klaviatūra 1-9: nustatyti objekto/dalies giją" msgid "Camera view - Default" @@ -19055,7 +19057,7 @@ msgstr "" msgid "Plate Type" msgstr "Plokštės tipas" -msgid "filament position" +msgid "Filament position" msgstr "gijos padėtis" msgid "Filament For Calibration" @@ -20923,7 +20925,7 @@ msgstr "Be istorinių užduočių!" msgid "Upgrading" msgstr "Atnaujinama" -msgid "syncing" +msgid "Syncing" msgstr "sinchronizuojama" msgid "Printing Finish" diff --git a/localization/i18n/nl/OrcaSlicer_nl.po b/localization/i18n/nl/OrcaSlicer_nl.po index be669a1f22..0083c98dc7 100644 --- a/localization/i18n/nl/OrcaSlicer_nl.po +++ b/localization/i18n/nl/OrcaSlicer_nl.po @@ -432,7 +432,7 @@ msgstr "" msgid "Size" msgstr "Maat" -msgid "uniform scale" +msgid "Uniform scale" msgstr "uniform schalen" msgid "Planar" @@ -687,7 +687,7 @@ msgstr "Verbinding" msgid "Cut by Plane" msgstr "Snij met behulp van vlak" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" "hiet-gevormde randen worden veroorzaakt door snijgereedschap: wil je dit nu " "herstellen?" @@ -2217,31 +2217,31 @@ msgstr "" msgid "Select All" msgstr "Alles selecteren" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "Selecteer alle objecten op het huidige printbed" msgid "Delete All" msgstr "Alles verwijderen" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "Verwijder alle objecten op het huidige printbed" msgid "Arrange" msgstr "Rangschikken" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "Huidig printbed rangschikken" msgid "Reload All" msgstr "" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "" msgid "Auto Rotate" msgstr "Automatisch roteren" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "Huidig printbed automatisch roteren" msgid "Delete Plate" @@ -2563,7 +2563,8 @@ msgstr "" msgid "Invalid numeric." msgstr "Onjuist getal." -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "" "één cel kan alleen naar één of meerdere cellen in dezelfde kolom worden " "gekopieerd" @@ -3685,7 +3686,7 @@ msgstr "" "De installatie van de plug-in is mislukt. Controleer of deze is geblokkeerd " "of verwijderd door anti-virussoftware." -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "klik hier voor meer informatie" msgid "" @@ -4213,7 +4214,7 @@ msgstr "" msgid "Nozzle offset calibration" msgstr "" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "" msgid "Auto Check: Quick Release Lever" @@ -4936,7 +4937,7 @@ msgstr "Bewerkingsgebied vergroten/verkleinen" msgid "Sequence" msgstr "Reeks" -msgid "object selection" +msgid "Object selection" msgstr "" msgid "part selection" @@ -4945,7 +4946,7 @@ msgstr "" msgid "number keys" msgstr "" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "" msgid "" @@ -5175,7 +5176,7 @@ msgid "Only the object being edited is visible." msgstr "Alleen het object waaraan gewerkt wordt is zichtbaar." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "" @@ -6433,7 +6434,7 @@ msgstr "" msgid "Upload failed\n" msgstr "Uploaden mislukt\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "het verkrijgen van instance_id is mislukt\n" msgid "" @@ -7473,13 +7474,14 @@ msgstr "Project opslaan" msgid "Importing Model" msgstr "Model importeren" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "voorbereiden van 3MF bestand..." msgid "Download failed, unknown file format." msgstr "" -msgid "downloading project..." +msgid "Downloading project..." msgstr "project downloaden..." msgid "Download failed, File size exception." @@ -8372,10 +8374,10 @@ msgstr "PRE-host: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Producthost" -msgid "debug save button" +msgid "Debug save button" msgstr "debug opslaan knop" -msgid "save debug settings" +msgid "Save debug settings" msgstr "bewaar debug instellingen" msgid "DEBUG settings have been saved successfully!" @@ -8673,7 +8675,7 @@ msgid "" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -msgid "send completed" +msgid "Send complete" msgstr "versturen gelukt" msgid "Error code" @@ -10466,7 +10468,7 @@ msgstr "Verplaats de selectie 10mm in een positieve X richting" msgid "Movement step set to 1 mm" msgstr "Bewegingsinterval ingesteld op 1mm" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "Toets 1-9: kies filament voor het object/onderdeel" msgid "Camera view - Default" @@ -17735,7 +17737,7 @@ msgstr "" msgid "Plate Type" msgstr "" -msgid "filament position" +msgid "Filament position" msgstr "filament positie" msgid "Filament For Calibration" @@ -19477,7 +19479,7 @@ msgstr "" msgid "Upgrading" msgstr "" -msgid "syncing" +msgid "Syncing" msgstr "" msgid "Printing Finish" diff --git a/localization/i18n/pl/OrcaSlicer_pl.po b/localization/i18n/pl/OrcaSlicer_pl.po index bb0bd68783..3ebfc91f75 100644 --- a/localization/i18n/pl/OrcaSlicer_pl.po +++ b/localization/i18n/pl/OrcaSlicer_pl.po @@ -434,7 +434,7 @@ msgstr "" msgid "Size" msgstr "Rozmiar" -msgid "uniform scale" +msgid "Uniform scale" msgstr "równomierne skalowanie" msgid "Planar" @@ -697,7 +697,7 @@ msgstr "Łącznik" msgid "Cut by Plane" msgstr "Cięcie płaszczyzną" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" "niezamknięte krawędzie mogą być spowodowane narzędziem do przecinania, czy " "chcesz to teraz naprawić?" @@ -2253,31 +2253,31 @@ msgstr "" msgid "Select All" msgstr "Zaznacz wszystko" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "zaznacz wszystkie obiekty na bieżącej płycie" msgid "Delete All" msgstr "Usuń wszystko" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "usuń wszystkie obiekty na bieżącej płycie" msgid "Arrange" msgstr "Ustaw" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "ustaw bieżącą płytę" msgid "Reload All" msgstr "Wczytaj wszystko ponownie" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "Przeładuj wszystko z dysku" msgid "Auto Rotate" msgstr "Obróć automatycznie" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "automatyczna rotacja obiektów na bieżącej płycie" msgid "Delete Plate" @@ -2601,7 +2601,8 @@ msgstr "Dodaj zakres wysokości" msgid "Invalid numeric." msgstr "Nieprawidłowa wartość numeryczna." -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "" "jedna komórka może być skopiowana do jednej lub wielu komórek w tej samej " "kolumnie" @@ -3751,8 +3752,8 @@ msgstr "" "Nie udało się zainstalować wtyczki. Sprawdź, czy nie jest zablokowana lub " "usunięta przez oprogramowanie antywirusowe." -msgid "click here to see more info" -msgstr "kliknij tutaj, aby zobaczyć więcej informacji" +msgid "Click here to see more info" +msgstr "Kliknij tutaj, aby zobaczyć więcej informacji" msgid "" "The network plugin was installed but could not be loaded. Please restart the " @@ -4288,7 +4289,7 @@ msgstr "" msgid "Nozzle offset calibration" msgstr "" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "" msgid "Auto Check: Quick Release Lever" @@ -5014,7 +5015,7 @@ msgstr "Zwiększ/zmniejsz obszar edycji" msgid "Sequence" msgstr "Kolejność" -msgid "object selection" +msgid "Object selection" msgstr "" msgid "part selection" @@ -5023,7 +5024,7 @@ msgstr "" msgid "number keys" msgstr "" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "" msgid "" @@ -5255,7 +5256,7 @@ msgid "Only the object being edited is visible." msgstr "Widoczny jest tylko edytowany obiekt." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "" @@ -6544,7 +6545,7 @@ msgstr "" msgid "Upload failed\n" msgstr "Nie udało się przesłać\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "nie udało się uzyskać instance_id\n" msgid "" @@ -7590,13 +7591,14 @@ msgstr "Zapisz projekt" msgid "Importing Model" msgstr "Importowanie modelu" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "przygotuj plik 3MF..." msgid "Download failed, unknown file format." msgstr "Nie udało się pobrać. Nieznany format pliku." -msgid "downloading project..." +msgid "Downloading project..." msgstr "pobieranie projektu ..." msgid "Download failed, File size exception." @@ -8487,10 +8489,10 @@ msgstr "Host PRE: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Host produktu" -msgid "debug save button" +msgid "Debug save button" msgstr "przycisk zapisywania debugowania" -msgid "save debug settings" +msgid "Save debug settings" msgstr "zapisz ustawienia debugowania" msgid "DEBUG settings have been saved successfully!" @@ -8779,7 +8781,7 @@ msgid "" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -msgid "send completed" +msgid "Send complete" msgstr "wysłanie zakończone" msgid "Error code" @@ -10625,7 +10627,7 @@ msgstr "Przesuń wybrane o 10 mm w kierunku dodatnim osi X" msgid "Movement step set to 1 mm" msgstr "Ustaw krok ruchu na 1 mm" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "klawiatura 1-9: ustaw filament dla obiektu/części" msgid "Camera view - Default" @@ -18927,7 +18929,7 @@ msgstr "" msgid "Plate Type" msgstr "Typ Płyty" -msgid "filament position" +msgid "Filament position" msgstr "pozycja filamentu" msgid "Filament For Calibration" @@ -20766,7 +20768,7 @@ msgstr "Brak historii zadań!" msgid "Upgrading" msgstr "Aktualizacja" -msgid "syncing" +msgid "Syncing" msgstr "synchronizacja" msgid "Printing Finish" @@ -24577,9 +24579,6 @@ msgstr "" #~ "Nie udało się pobrać wtyczki. Sprawdź ustawienia zapory ogniowej i " #~ "oprogramowania VPN, sprawdź i spróbuj ponownie." -#~ msgid "Click here to see more info" -#~ msgstr "Kliknij tutaj, aby zobaczyć więcej informacji" - #~ msgid "" #~ ") to locate the toolhead's position. This prevents the device from moving " #~ "beyond the printable boundary and causing equipment wear." diff --git a/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po b/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po index 51d7fb3afd..dc08a8c007 100644 --- a/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po +++ b/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po @@ -460,8 +460,8 @@ msgstr "Coordenadas de peça" msgid "Size" msgstr "Tamanho" -msgid "uniform scale" -msgstr "escala uniforme" +msgid "Uniform scale" +msgstr "Escala uniforme" msgid "Planar" msgstr "Plano" @@ -720,9 +720,9 @@ msgstr "Conector" msgid "Cut by Plane" msgstr "Cortar por Plano" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" -"as arestas abertas podem ser causadas pela ferramenta de corte, você quer " +"As arestas abertas podem ser causadas pela ferramenta de corte, você quer " "corrigí-las agora?" msgid "Repairing model object" @@ -2298,32 +2298,32 @@ msgstr "Mesclar com" msgid "Select All" msgstr "Selecionar Tudo" -msgid "select all objects on current plate" -msgstr "selecionar todos os objetos na placa atual" +msgid "Select all objects on the current plate" +msgstr "Selecionar todos os objetos na placa atual" msgid "Delete All" msgstr "Apagar Tudo" -msgid "delete all objects on current plate" -msgstr "apagar todos os objetos na placa atual" +msgid "Delete all objects on the current plate" +msgstr "Apagar todos os objetos na placa atual" msgid "Arrange" msgstr "Organizar" -msgid "arrange current plate" -msgstr "organizar placa atual" +msgid "Arrange current plate" +msgstr "Organizar placa atual" msgid "Reload All" msgstr "Recarregar Tudo" -msgid "reload all from disk" -msgstr "recarregar tudo do disco" +msgid "Reload all from disk" +msgstr "Recarregar tudo do disco" msgid "Auto Rotate" msgstr "Auto Rotação" -msgid "auto rotate current plate" -msgstr "rotacionar automaticamente a placa atual" +msgid "Auto rotate current plate" +msgstr "Rotacionar automaticamente a placa atual" msgid "Delete Plate" msgstr "Apagar Placa" @@ -2643,9 +2643,9 @@ msgstr "Adicionar intervalo de altura" msgid "Invalid numeric." msgstr "Número inválido." -msgid "one cell can only be copied to one or multiple cells in the same column" +msgid "One cell can only be copied to one or more cells in the same column." msgstr "" -"uma célula só pode ser copiada para uma ou várias células na mesma coluna" +"Uma célula só pode ser copiada para uma ou mais células na mesma coluna." msgid "Copying multiple cells is not supported." msgstr "A cópia de múltiplas células não é suportada." @@ -3860,8 +3860,8 @@ msgstr "" "Falha ao instalar o plug-in. Verifique se ele está bloqueado ou excluído " "pelo software antivírus." -msgid "click here to see more info" -msgstr "clique aqui para ver mais informações" +msgid "Click here to see more info" +msgstr "Clique aqui para ver mais informações" msgid "" "The network plugin was installed but could not be loaded. Please restart the " @@ -4413,8 +4413,8 @@ msgstr "Medir a precisão do movimento" msgid "Nozzle offset calibration" msgstr "Calibração do deslocamento do bico" -msgid "high temperature auto bed leveling" -msgstr "nivelamento automático da mesa em alta temperatura" +msgid "High temperature auto bed leveling" +msgstr "Nivelamento automático da mesa em alta temperatura" msgid "Auto Check: Quick Release Lever" msgstr "Verificação Automática: Alavanca de Liberação Rápida" @@ -5180,8 +5180,8 @@ msgstr "Aumentar/diminuir área de edição" msgid "Sequence" msgstr "Sequência" -msgid "object selection" -msgstr "seleção de objeto" +msgid "Object selection" +msgstr "Seleção de objeto" msgid "part selection" msgstr "seleção de peça" @@ -5189,8 +5189,8 @@ msgstr "seleção de peça" msgid "number keys" msgstr "teclas numéricas" -msgid "number keys can quickly change the color of objects" -msgstr "teclas numéricas podem mudar a cor dos objetos rapidamente" +msgid "Number keys can quickly change the color of objects" +msgstr "Teclas numéricas podem mudar a cor dos objetos rapidamente" msgid "" "Following objects are laid over the boundary of plate or exceeds the height " @@ -5436,9 +5436,9 @@ msgid "Only the object being edited is visible." msgstr "Apenas o objeto em edição está visível." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" -"os filamentos %s não podem ser impressos diretamente na superfície desta " +"Os filamentos %s não podem ser impressos diretamente na superfície desta " "placa." msgid "" @@ -6748,8 +6748,8 @@ msgstr "" msgid "Upload failed\n" msgstr "Falha no envio\n" -msgid "obtaining instance_id failed\n" -msgstr "falha ao obter o instance_id\n" +msgid "Obtaining instance_id failed\n" +msgstr "Falha ao obter o instance_id\n" msgid "" "Your comment result cannot be uploaded due to the following reasons:\n" @@ -7845,14 +7845,14 @@ msgstr "Salvar Projeto" msgid "Importing Model" msgstr "Importando Modelo" -msgid "prepare 3MF file..." -msgstr "preparar o arquivo 3MF…" +msgid "Preparing 3MF file..." +msgstr "Preparando o arquivo 3MF…" msgid "Download failed, unknown file format." msgstr "Baixar falhou, formato de arquivo desconhecido." -msgid "downloading project..." -msgstr "baixando projeto…" +msgid "Downloading project..." +msgstr "Baixando projeto…" msgid "Download failed, File size exception." msgstr "Baixar falhou, erro no tamanho do arquivo." @@ -8795,11 +8795,11 @@ msgstr "Host PRE: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Host de Produto" -msgid "debug save button" -msgstr "botão de salvar depuração" +msgid "Debug save button" +msgstr "Botão de salvar depuração" -msgid "save debug settings" -msgstr "salvar configurações de depuração" +msgid "Save debug settings" +msgstr "Salvar configurações de depuração" msgid "DEBUG settings have been saved successfully!" msgstr "As configurações de depuração foram salvas com sucesso!" @@ -9103,8 +9103,8 @@ msgstr "" "*Modo automático: Verifique a calibração antes de imprimir. Pule se for " "desnecessário." -msgid "send completed" -msgstr "enviado completo" +msgid "Send complete" +msgstr "Envio completo" msgid "Error code" msgstr "Código de erro" @@ -11071,8 +11071,8 @@ msgstr "Mover seleção 10 mm na direção X positiva" msgid "Movement step set to 1 mm" msgstr "Passo de movimento configurado para 1 mm" -msgid "keyboard 1-9: set filament for object/part" -msgstr "teclado 1-9: ajustar filamento para objeto/peça" +msgid "Keyboard 1-9: set filament for object/part" +msgstr "Teclado 1-9: ajustar filamento para objeto/peça" msgid "Camera view - Default" msgstr "Vista da câmera - Padrão" @@ -19631,8 +19631,8 @@ msgstr "Informações de Bico" msgid "Plate Type" msgstr "Tipo de Placa" -msgid "filament position" -msgstr "posição do filamento" +msgid "Filament position" +msgstr "Posição do filamento" msgid "Filament For Calibration" msgstr "Filamento Para Calibração" @@ -21592,8 +21592,8 @@ msgstr "Nenhuma tarefa no histórico!" msgid "Upgrading" msgstr "Atualizando" -msgid "syncing" -msgstr "sincronizando" +msgid "Syncing" +msgstr "Sincronizando" msgid "Printing Finish" msgstr "Impressão finalizada" diff --git a/localization/i18n/ru/OrcaSlicer_ru.po b/localization/i18n/ru/OrcaSlicer_ru.po index c99d7c7f0e..dd37e93c23 100644 --- a/localization/i18n/ru/OrcaSlicer_ru.po +++ b/localization/i18n/ru/OrcaSlicer_ru.po @@ -420,7 +420,7 @@ msgstr "Относительно части" msgid "Size" msgstr "Размер" -msgid "uniform scale" +msgid "Uniform scale" msgstr "Сохранять пропорции" msgid "Planar" @@ -684,7 +684,7 @@ msgstr "Соединение" msgid "Cut by Plane" msgstr "Разрез по плоскости" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "При разрезании образовались открытые рёбра. Хотите исправить это сейчас?" msgid "Repairing model object" @@ -2180,31 +2180,31 @@ msgstr "Объединить с" msgid "Select All" msgstr "Выбрать всё" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "Выбрать все модели на текущем столе" msgid "Delete All" msgstr "Удалить всё" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "Удаление всех моделей на текущем столе" msgid "Arrange" msgstr "Расставить" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "Расстановка моделей на текущем столе" msgid "Reload All" msgstr "Перезагрузить всё" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "Перезагрузить всё с диска" msgid "Auto Rotate" msgstr "Положить всё на стол" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "Положить все модели на текущем столе" msgid "Delete Plate" @@ -2515,7 +2515,8 @@ msgstr "Добавление диапазона высот слоёв" msgid "Invalid numeric." msgstr "Неправильное числовое значение." -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "одна ячейка может быть скопирована только в одну или несколько ячеек одного и того же столбца" msgid "Copying multiple cells is not supported." @@ -3506,7 +3507,7 @@ msgstr "Не удалось загрузить плагин. Пожалуйст msgid "Failed to install the plug-in. Please check whether it is blocked or deleted by anti-virus software." msgstr "Не удалось установить плагин. Пожалуйста, проверьте, не заблокирован ли он или не удалён антивирусом." -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "Подробнее о проблеме" msgid "The network plugin was installed but could not be loaded. Please restart the application." @@ -3977,7 +3978,7 @@ msgstr "" msgid "Nozzle offset calibration" msgstr "Калибровка смещения сопла" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "Измерение кривизны разогретого стола" msgid "Auto Check: Quick Release Lever" @@ -4702,7 +4703,7 @@ msgstr "Изменить размер инструмента" msgid "Sequence" msgstr "Последовательность" -msgid "object selection" +msgid "Object selection" msgstr "Выбрать модель" msgid "part selection" @@ -4711,7 +4712,7 @@ msgstr "Выбрать часть" msgid "number keys" msgstr "(цифры)" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "Быстро переназначить цвет" msgid "Following objects are laid over the boundary of plate or exceeds the height limit:\n" @@ -4929,7 +4930,7 @@ msgid "Only the object being edited is visible." msgstr "При редактировании другие модели скрываются." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "PLA and PETG filaments detected in the mixture. Adjust parameters according to the Wiki to ensure print quality." @@ -6162,7 +6163,7 @@ msgstr "Синхронизация результатов печати. Повт msgid "Upload failed\n" msgstr "Ошибка отправки\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "не удалось получить instance_id\n" msgid "" @@ -7110,13 +7111,14 @@ msgstr "Сохранение проекта" msgid "Importing Model" msgstr "Импортирование модели" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "подготовка 3MF файла..." msgid "Download failed, unknown file format." msgstr "Не удалось загрузить, неизвестный формат файла." -msgid "downloading project..." +msgid "Downloading project..." msgstr "скачивание проекта..." msgid "Download failed, File size exception." @@ -7930,10 +7932,10 @@ msgstr "PRE host: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Хост принтера" -msgid "debug save button" +msgid "Debug save button" msgstr "кнопка сохранения отладки" -msgid "save debug settings" +msgid "Save debug settings" msgstr "сохранить настройки отладки" msgid "DEBUG settings have been saved successfully!" @@ -8222,7 +8224,7 @@ msgid "" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -msgid "send completed" +msgid "Send complete" msgstr "отправка завершена" msgid "Error code" @@ -9770,7 +9772,7 @@ msgstr "Перемещение выбранного на 10 мм по оси X+" msgid "Movement step set to 1 mm" msgstr "Зафиксировать шаг перемещения на 1 мм" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "Клавиши 1-9: задать пруток для модели/части модели" msgid "Camera view - Default" @@ -15890,7 +15892,7 @@ msgstr "" msgid "Plate Type" msgstr "Покрытие" -msgid "filament position" +msgid "Filament position" msgstr "положение прутка" msgid "Filament For Calibration" @@ -17431,7 +17433,7 @@ msgstr "История заданий пуста!" msgid "Upgrading" msgstr "Обновление" -msgid "syncing" +msgid "Syncing" msgstr "синхронизация" msgid "Printing Finish" diff --git a/localization/i18n/sv/OrcaSlicer_sv.po b/localization/i18n/sv/OrcaSlicer_sv.po index 19ee7991fe..9fb332e533 100644 --- a/localization/i18n/sv/OrcaSlicer_sv.po +++ b/localization/i18n/sv/OrcaSlicer_sv.po @@ -429,7 +429,7 @@ msgstr "" msgid "Size" msgstr "Storlek" -msgid "uniform scale" +msgid "Uniform scale" msgstr "enhetlig skala" msgid "Planar" @@ -684,7 +684,7 @@ msgstr "Kontakt" msgid "Cut by Plane" msgstr "" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "Icke-mångsidiga kanter orsakade av skärverktyg: vill du fixa det nu?" msgid "Repairing model object" @@ -2187,31 +2187,31 @@ msgstr "" msgid "Select All" msgstr "Välj Alla" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "Välj alla objekt på plattan" msgid "Delete All" msgstr "Radera Allt" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "Radera alla objekt på plattan" msgid "Arrange" msgstr "Arrangera" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "Arrangera plattan" msgid "Reload All" msgstr "" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "" msgid "Auto Rotate" msgstr "Auto Rotera" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "auto rotera plattan" msgid "Delete Plate" @@ -2532,7 +2532,8 @@ msgstr "Lägg till höjdintervall" msgid "Invalid numeric." msgstr "Ogiltig siffra." -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "" "En cell kan endast kopieras till en eller flertalet celler i samma kolumn" @@ -3662,7 +3663,7 @@ msgstr "" "Det gick inte att installera plugin-programmet. Kontrollera om den är " "blockerad eller har raderats av antivirusprogram." -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "Klicka här för att se mer information" msgid "" @@ -4167,7 +4168,7 @@ msgstr "" msgid "Nozzle offset calibration" msgstr "" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "" msgid "Auto Check: Quick Release Lever" @@ -4889,7 +4890,7 @@ msgstr "Öka/minska redigeringsområdet" msgid "Sequence" msgstr "Sekvens" -msgid "object selection" +msgid "Object selection" msgstr "" msgid "part selection" @@ -4898,7 +4899,7 @@ msgstr "" msgid "number keys" msgstr "" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "" msgid "" @@ -5128,7 +5129,7 @@ msgid "Only the object being edited is visible." msgstr "Bara objektet som editeras är synligt." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "" @@ -6382,7 +6383,7 @@ msgstr "Synkroniserar utskriftsresultaten. Försök igen om några sekunder." msgid "Upload failed\n" msgstr "Uppladdningen misslyckades\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "det gick inte att få instance_id\n" msgid "" @@ -7402,13 +7403,14 @@ msgstr "Spara projekt" msgid "Importing Model" msgstr "Importerar Modell" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "förbereder 3mf-filen..." msgid "Download failed, unknown file format." msgstr "" -msgid "downloading project..." +msgid "Downloading project..." msgstr "laddar ner projekt ..." msgid "Download failed, File size exception." @@ -8272,10 +8274,10 @@ msgstr "PRE host: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Produktvärd" -msgid "debug save button" +msgid "Debug save button" msgstr "Spar knappen för felsökning" -msgid "save debug settings" +msgid "Save debug settings" msgstr "spara felsöknings knappen" msgid "DEBUG settings have been saved successfully!" @@ -8568,7 +8570,7 @@ msgid "" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -msgid "send completed" +msgid "Send complete" msgstr "Skicka komplett" msgid "Error code" @@ -10335,7 +10337,7 @@ msgstr "Flytta markeringen 10mm i positiv X riktning" msgid "Movement step set to 1 mm" msgstr "Rörelse steg är vald till 1mm" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "tangentbord 1-9: fastställer filament för objekt/del" msgid "Camera view - Default" @@ -17435,8 +17437,8 @@ msgstr "" msgid "Plate Type" msgstr "Typ av byggplatta" -msgid "filament position" -msgstr "Filament position" +msgid "Filament position" +msgstr "" msgid "Filament For Calibration" msgstr "Filament för kalibrering" @@ -19152,7 +19154,7 @@ msgstr "" msgid "Upgrading" msgstr "" -msgid "syncing" +msgid "Syncing" msgstr "" msgid "Printing Finish" diff --git a/localization/i18n/tr/OrcaSlicer_tr.po b/localization/i18n/tr/OrcaSlicer_tr.po index 5cfcec670a..eda897b98e 100644 --- a/localization/i18n/tr/OrcaSlicer_tr.po +++ b/localization/i18n/tr/OrcaSlicer_tr.po @@ -432,7 +432,7 @@ msgstr "Parça koordinatları" msgid "Size" msgstr "Boyut" -msgid "uniform scale" +msgid "Uniform scale" msgstr "düzgün ölçek" msgid "Planar" @@ -692,7 +692,7 @@ msgstr "Bağlayıcı" msgid "Cut by Plane" msgstr "Düzlemsel Kes" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" "Ana kat olmayan kenarlar kesme aletinden kaynaklanıyor, şimdi düzeltmek " "istiyor musunuz?" @@ -2247,31 +2247,31 @@ msgstr "" msgid "Select All" msgstr "Hepsini seç" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "geçerli plakadaki tüm nesneleri seç" msgid "Delete All" msgstr "Hepsini sil" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "geçerli plakadaki tüm nesneleri sil" msgid "Arrange" msgstr "Hizala" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "Mevcut plakayı hizala" msgid "Reload All" msgstr "Tümünü yeniden yükle" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "Hepsini diskten yeniden yükle" msgid "Auto Rotate" msgstr "Otomatik döndürme" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "Geçerli plakayı otomatik döndürme" msgid "Delete Plate" @@ -2583,7 +2583,8 @@ msgstr "Yükseklik aralığı ekle" msgid "Invalid numeric." msgstr "Geçersiz sayı." -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "" "bir hücre aynı sütundaki yalnızca bir veya daha fazla hücreye kopyalanabilir" @@ -3725,7 +3726,7 @@ msgstr "" "Eklenti yüklenemedi. Lütfen anti-virüs yazılımı tarafından engellenip " "engellenmediğini veya silinip silinmediğini kontrol edin." -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "daha fazla bilgi görmek için burayı tıklayın" msgid "" @@ -4264,7 +4265,7 @@ msgstr "" msgid "Nozzle offset calibration" msgstr "" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "" msgid "Auto Check: Quick Release Lever" @@ -4994,7 +4995,7 @@ msgstr "Düzenleme alanını artır/azalt" msgid "Sequence" msgstr "Sekans" -msgid "object selection" +msgid "Object selection" msgstr "nesne seçimi" msgid "part selection" @@ -5003,7 +5004,7 @@ msgstr "parça seçimi" msgid "number keys" msgstr "sayı tuşları" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "Sayı tuşları nesnelerin rengini hızla değiştirebilir" msgid "" @@ -5235,7 +5236,7 @@ msgid "Only the object being edited is visible." msgstr "Yalnızca düzenlenen nesne görünür." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "" @@ -6517,7 +6518,7 @@ msgstr "" msgid "Upload failed\n" msgstr "Yükleme başarısız\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "instance_id alınamadı\n" msgid "" @@ -7566,13 +7567,14 @@ msgstr "Projeyi kaydet" msgid "Importing Model" msgstr "Model İçe aktarılıyor" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "3mf dosyasını hazırla..." msgid "Download failed, unknown file format." msgstr "İndirme başarısız oldu, dosya türü bilinmiyor." -msgid "downloading project..." +msgid "Downloading project..." msgstr "proje indiriliyor..." msgid "Download failed, File size exception." @@ -8473,10 +8475,10 @@ msgstr "ÖN ana bilgisayar: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Ürün ana bilgisayarı" -msgid "debug save button" +msgid "Debug save button" msgstr "hata ayıklama kaydet düğmesi" -msgid "save debug settings" +msgid "Save debug settings" msgstr "hata ayıklama ayarlarını kaydet" msgid "DEBUG settings have been saved successfully!" @@ -8765,7 +8767,7 @@ msgid "" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -msgid "send completed" +msgid "Send complete" msgstr "gönderme tamamlandı" msgid "Error code" @@ -10606,7 +10608,7 @@ msgstr "Seçimi pozitif X yönünde 10 mm taşı" msgid "Movement step set to 1 mm" msgstr "Hareket adımı 1 mm'ye ayarlandı" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "klavye 1-9: nesne/parça için filamenti ayarlayın" msgid "Camera view - Default" @@ -18967,7 +18969,7 @@ msgstr "" msgid "Plate Type" msgstr "Plaka Tipi" -msgid "filament position" +msgid "Filament position" msgstr "filament konumu" msgid "Filament For Calibration" @@ -20828,7 +20830,7 @@ msgstr "Tarihi görevler yok!" msgid "Upgrading" msgstr "Yükseltiliyor" -msgid "syncing" +msgid "Syncing" msgstr "Senkronize ediliyor" msgid "Printing Finish" diff --git a/localization/i18n/uk/OrcaSlicer_uk.po b/localization/i18n/uk/OrcaSlicer_uk.po index 05366556ff..d78e62fcf0 100644 --- a/localization/i18n/uk/OrcaSlicer_uk.po +++ b/localization/i18n/uk/OrcaSlicer_uk.po @@ -438,7 +438,7 @@ msgstr "" msgid "Size" msgstr "Розмір" -msgid "uniform scale" +msgid "Uniform scale" msgstr "рівномірне масштабування" msgid "Planar" @@ -702,7 +702,7 @@ msgstr "З'єднувач" msgid "Cut by Plane" msgstr "Вирізати площиною" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" "неманіфольдні ребра можуть бути викликані інструментом різання, ви хочете " "виправити це зараз?" @@ -2255,31 +2255,31 @@ msgstr "" msgid "Select All" msgstr "Вибрати все" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "вибрати всі об'єкти на поточній пластині" msgid "Delete All" msgstr "Видалити все" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "видалити всі об'єкти на поточній пластині" msgid "Arrange" msgstr "Впорядкувати" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "впорядкувати поточну пластину" msgid "Reload All" msgstr "Перезавантажити все" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "перезавантажити все з диска" msgid "Auto Rotate" msgstr "Авто-поворот" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "автоповорот поточної пластини" msgid "Delete Plate" @@ -2607,7 +2607,8 @@ msgstr "Додавання діапазон висот шарів" msgid "Invalid numeric." msgstr "Неприпустиме числове значення." -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "" "одну клітинку можна скопіювати лише в одну або декілька клітинок у тому " "самому стовпці" @@ -3754,7 +3755,7 @@ msgstr "" "або видалений\n" "за допомогою антивірусного програмного забезпечення." -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "натисніть тут, щоб побачити більше інформації" msgid "" @@ -4288,7 +4289,7 @@ msgstr "" msgid "Nozzle offset calibration" msgstr "" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "" msgid "Auto Check: Quick Release Lever" @@ -5015,7 +5016,7 @@ msgstr "Збільшення/зменшення області редагува msgid "Sequence" msgstr "Послідовність" -msgid "object selection" +msgid "Object selection" msgstr "" msgid "part selection" @@ -5024,7 +5025,7 @@ msgstr "" msgid "number keys" msgstr "" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "" msgid "" @@ -5256,7 +5257,7 @@ msgid "Only the object being edited is visible." msgstr "Відображається лише редагований об'єкт." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "" @@ -6556,7 +6557,7 @@ msgstr "" msgid "Upload failed\n" msgstr "Помилка завантаження\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "помилка отримання instance_id\n" msgid "" @@ -7609,13 +7610,14 @@ msgstr "Зберегти проект" msgid "Importing Model" msgstr "Імпорт моделі" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "підготувати файл 3MF..." msgid "Download failed, unknown file format." msgstr "Не вдалося завантажити, невідомий формат файлу." -msgid "downloading project..." +msgid "Downloading project..." msgstr "завантажую проект..." msgid "Download failed, File size exception." @@ -8515,10 +8517,10 @@ msgstr "Хост PRE: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Хост продукту" -msgid "debug save button" +msgid "Debug save button" msgstr "кнопка збереження налагодження" -msgid "save debug settings" +msgid "Save debug settings" msgstr "зберегти налаштування налагодження" msgid "DEBUG settings have been saved successfully!" @@ -8809,7 +8811,7 @@ msgid "" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -msgid "send completed" +msgid "Send complete" msgstr "відправлення завершено" msgid "Error code" @@ -10653,7 +10655,7 @@ msgstr "Перемістити виділення на 10 мм у позитив msgid "Movement step set to 1 mm" msgstr "Крок переміщення встановлено на 1 мм" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "клавіатура 1-9: встановити філамент для об'єкта/деталі" msgid "Camera view - Default" @@ -18885,7 +18887,7 @@ msgstr "" msgid "Plate Type" msgstr "Тип Пластини" -msgid "filament position" +msgid "Filament position" msgstr "позиція філаменту" msgid "Filament For Calibration" @@ -20730,7 +20732,7 @@ msgstr "Історії завдань немає!" msgid "Upgrading" msgstr "Оновлення" -msgid "syncing" +msgid "Syncing" msgstr "синхронізація" msgid "Printing Finish" diff --git a/localization/i18n/vi/OrcaSlicer_vi.po b/localization/i18n/vi/OrcaSlicer_vi.po index e7ff7226bf..e94295bf5c 100644 --- a/localization/i18n/vi/OrcaSlicer_vi.po +++ b/localization/i18n/vi/OrcaSlicer_vi.po @@ -431,7 +431,7 @@ msgstr "Tọa độ phần" msgid "Size" msgstr "Kích thước" -msgid "uniform scale" +msgid "Uniform scale" msgstr "tỷ lệ đồng đều" msgid "Planar" @@ -689,7 +689,7 @@ msgstr "Connector" msgid "Cut by Plane" msgstr "Cắt bằng mặt phẳng" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" "cạnh non-manifold được tạo bởi công cụ cắt, bạn có muốn sửa ngay không?" @@ -2226,31 +2226,31 @@ msgstr "" msgid "Select All" msgstr "Chọn tất cả" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "chọn tất cả vật thể trên plate hiện tại" msgid "Delete All" msgstr "Xóa tất cả" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "xóa tất cả vật thể trên plate hiện tại" msgid "Arrange" msgstr "Sắp xếp" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "sắp xếp plate hiện tại" msgid "Reload All" msgstr "Tải lại tất cả" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "tải lại tất cả từ ổ đĩa" msgid "Auto Rotate" msgstr "Tự động xoay" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "tự động xoay plate hiện tại" msgid "Delete Plate" @@ -2559,7 +2559,8 @@ msgstr "Thêm phạm vi chiều cao" msgid "Invalid numeric." msgstr "Số không hợp lệ." -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "một ô chỉ có thể sao chép vào một hoặc nhiều ô trong cùng cột" msgid "Copying multiple cells is not supported." @@ -3681,7 +3682,7 @@ msgstr "" "Cài đặt plug-in thất bại. Vui lòng kiểm tra xem nó có bị chặn hoặc xóa bởi " "phần mềm diệt virus không." -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "nhấn vào đây để xem thêm thông tin" msgid "" @@ -4214,7 +4215,7 @@ msgstr "" msgid "Nozzle offset calibration" msgstr "" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "" msgid "Auto Check: Quick Release Lever" @@ -4944,7 +4945,7 @@ msgstr "Tăng/giảm vùng chỉnh sửa" msgid "Sequence" msgstr "Trình tự" -msgid "object selection" +msgid "Object selection" msgstr "chọn vật thể" msgid "part selection" @@ -4953,7 +4954,7 @@ msgstr "chọn phần" msgid "number keys" msgstr "phím số" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "phím số có thể nhanh chóng đổi màu của vật thể" msgid "" @@ -5185,7 +5186,7 @@ msgid "Only the object being edited is visible." msgstr "Chỉ vật thể đang được chỉnh sửa là hiển thị." #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "" @@ -6447,7 +6448,7 @@ msgstr "Đang đồng bộ kết quả in. Vui lòng thử lại sau vài giây. msgid "Upload failed\n" msgstr "Tải lên thất bại\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "lấy instance_id thất bại\n" msgid "" @@ -7483,13 +7484,14 @@ msgstr "Lưu dự án" msgid "Importing Model" msgstr "Đang nhập model" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "chuẩn bị file 3MF..." msgid "Download failed, unknown file format." msgstr "Tải xuống thất bại, định dạng file không xác định." -msgid "downloading project..." +msgid "Downloading project..." msgstr "đang tải dự án xuống..." msgid "Download failed, File size exception." @@ -8371,10 +8373,10 @@ msgstr "Máy chủ PRE: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Máy chủ sản phẩm" -msgid "debug save button" +msgid "Debug save button" msgstr "nút lưu gỡ lỗi" -msgid "save debug settings" +msgid "Save debug settings" msgstr "lưu cài đặt gỡ lỗi" msgid "DEBUG settings have been saved successfully!" @@ -8663,7 +8665,7 @@ msgid "" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -msgid "send completed" +msgid "Send complete" msgstr "gửi hoàn tất" msgid "Error code" @@ -10476,7 +10478,7 @@ msgstr "Di chuyển lựa chọn 10 mm theo hướng X dương" msgid "Movement step set to 1 mm" msgstr "Bước di chuyển được đặt thành 1 mm" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "bàn phím 1-9: đặt filament cho đối tượng/phần" msgid "Camera view - Default" @@ -18629,7 +18631,7 @@ msgstr "" msgid "Plate Type" msgstr "Loại bàn" -msgid "filament position" +msgid "Filament position" msgstr "vị trí filament" msgid "Filament For Calibration" @@ -20460,7 +20462,7 @@ msgstr "Không có tác vụ lịch sử!" msgid "Upgrading" msgstr "Đang nâng cấp" -msgid "syncing" +msgid "Syncing" msgstr "đang đồng bộ" msgid "Printing Finish" diff --git a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po index 7dc28219ca..6e8d95281d 100644 --- a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po +++ b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po @@ -429,7 +429,7 @@ msgstr "零件坐标" msgid "Size" msgstr "大小" -msgid "uniform scale" +msgid "Uniform scale" msgstr "等比例缩放" msgid "Planar" @@ -687,7 +687,7 @@ msgstr "连接件" msgid "Cut by Plane" msgstr "按平面切割" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "因切割产生了非流形边，您是否想现在修复？" msgid "Repairing model object" @@ -2214,31 +2214,31 @@ msgstr "与其合并" msgid "Select All" msgstr "全选" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "全选当前盘对象" msgid "Delete All" msgstr "删除所有" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "删除当前盘所有对象" msgid "Arrange" msgstr "自动摆放" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "自动摆放当前盘" msgid "Reload All" msgstr "重新加载全部" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "从磁盘重新加载全部" msgid "Auto Rotate" msgstr "自动朝向" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "在当前盘执行自动朝向" msgid "Delete Plate" @@ -2538,7 +2538,8 @@ msgstr "添加高度范围" msgid "Invalid numeric." msgstr "数值错误。" -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "一个单元格仅能被复制到同一列的一个或多个单元格" msgid "Copying multiple cells is not supported." @@ -3643,7 +3644,7 @@ msgid "" "by anti-virus software." msgstr "安装插件失败。请检查是否被杀毒软件屏蔽或删除。" -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "点击这里查看更多信息" msgid "" @@ -4154,7 +4155,7 @@ msgstr "测量运动精度" msgid "Nozzle offset calibration" msgstr "喷嘴偏移校准" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "高温自动床身调平" msgid "Auto Check: Quick Release Lever" @@ -4888,7 +4889,7 @@ msgstr "增加/减小编辑区域" msgid "Sequence" msgstr "顺序" -msgid "object selection" +msgid "Object selection" msgstr "对象选择" msgid "part selection" @@ -4897,7 +4898,7 @@ msgstr "零件选择" msgid "number keys" msgstr "数字键" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "数字键可以快速更改对象颜色" msgid "" @@ -5130,7 +5131,7 @@ msgid "Only the object being edited is visible." msgstr "只有正在编辑的对象是可见的。" #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "细丝 %s 不能直接打印在该板的表面上。" msgid "" @@ -6376,7 +6377,7 @@ msgstr "正在同步打印结果。请稍后重试。" msgid "Upload failed\n" msgstr "上传失败\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "获取instance_id失败\n" msgid "" @@ -7378,13 +7379,14 @@ msgstr "保存项目" msgid "Importing Model" msgstr "正在导入模型" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "正在准备3mf文件..." msgid "Download failed, unknown file format." msgstr "下载失败，未知文件格式。" -msgid "downloading project..." +msgid "Downloading project..." msgstr "项目下载中..." msgid "Download failed, File size exception." @@ -8253,10 +8255,10 @@ msgstr "预发布主机：api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "正式环境" -msgid "debug save button" +msgid "Debug save button" msgstr "保存" -msgid "save debug settings" +msgid "Save debug settings" msgstr "保存调试设置" msgid "DEBUG settings have been saved successfully!" @@ -8551,7 +8553,7 @@ msgstr "" "校准喷嘴偏移以提高打印质量。\n" "*自动模式：打印前检查校准情况。如果不需要，请跳过。" -msgid "send completed" +msgid "Send complete" msgstr "发送完成" msgid "Error code" @@ -10329,7 +10331,7 @@ msgstr "X方向移动 10mm" msgid "Movement step set to 1 mm" msgstr "沿X、Y轴以1mm为步进移动对象" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "按键1-9：设置对象/零件的耗材丝" msgid "Camera view - Default" @@ -17878,7 +17880,7 @@ msgstr "喷嘴信息" msgid "Plate Type" msgstr "热床类型" -msgid "filament position" +msgid "Filament position" msgstr "耗材丝位置" msgid "Filament For Calibration" @@ -19677,7 +19679,7 @@ msgstr "没有历史任务！" msgid "Upgrading" msgstr "升级中" -msgid "syncing" +msgid "Syncing" msgstr "同步中" msgid "Printing Finish" diff --git a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po index 82b872a0dc..63c15b048c 100644 --- a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po +++ b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po @@ -433,7 +433,7 @@ msgstr "零件座標" msgid "Size" msgstr "尺寸" -msgid "uniform scale" +msgid "Uniform scale" msgstr "等比例縮放" msgid "Planar" @@ -691,7 +691,7 @@ msgstr "連接件" msgid "Cut by Plane" msgstr "用平面分割" -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "切科後產生非流形邊，是否要修復？" msgid "Repairing model object" @@ -2221,31 +2221,31 @@ msgstr "合併到" msgid "Select All" msgstr "全選" -msgid "select all objects on current plate" +msgid "Select all objects on the current plate" msgstr "全選此列印板上所有物件" msgid "Delete All" msgstr "刪除所有" -msgid "delete all objects on current plate" +msgid "Delete all objects on the current plate" msgstr "刪除此列印板上所有物件" msgid "Arrange" msgstr "自動擺放" -msgid "arrange current plate" +msgid "Arrange current plate" msgstr "自動擺放此列印版" msgid "Reload All" msgstr "重新載入所有物件" -msgid "reload all from disk" +msgid "Reload all from disk" msgstr "從硬碟重新載入所有物件" msgid "Auto Rotate" msgstr "自動旋轉方向" -msgid "auto rotate current plate" +msgid "Auto rotate current plate" msgstr "自動旋轉此列印板上的物件方向" msgid "Delete Plate" @@ -2550,7 +2550,8 @@ msgstr "新增高度範圍" msgid "Invalid numeric." msgstr "數值錯誤。" -msgid "one cell can only be copied to one or multiple cells in the same column" +#, fuzzy +msgid "One cell can only be copied to one or more cells in the same column." msgstr "一個單元格僅能被複製到同一列的一個或多個單元格" msgid "Copying multiple cells is not supported." @@ -3672,7 +3673,7 @@ msgid "" "by anti-virus software." msgstr "外掛程式安裝失敗。請檢查是否被防毒軟體阻擋或刪除。" -msgid "click here to see more info" +msgid "Click here to see more info" msgstr "點擊這裡查看更多資訊" msgid "" @@ -4221,7 +4222,7 @@ msgstr "測量運動準確度" msgid "Nozzle offset calibration" msgstr "噴嘴偏移校正" -msgid "high temperature auto bed leveling" +msgid "High temperature auto bed leveling" msgstr "高溫自動熱床調平" msgid "Auto Check: Quick Release Lever" @@ -4956,7 +4957,7 @@ msgstr "增加/減小編輯區域" msgid "Sequence" msgstr "順序" -msgid "object selection" +msgid "Object selection" msgstr "物件選擇" msgid "part selection" @@ -4965,7 +4966,7 @@ msgstr "零件選擇" msgid "number keys" msgstr "數字鍵" -msgid "number keys can quickly change the color of objects" +msgid "Number keys can quickly change the color of objects" msgstr "數字鍵可快速更改物件顏色" msgid "" @@ -5198,7 +5199,7 @@ msgid "Only the object being edited is visible." msgstr "只有正在編輯的物件是可見的。" #, c-format, boost-format -msgid "filaments %s cannot be printed directly on the surface of this plate." +msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "線材 %s 不能直接列印在此列印板表面。" msgid "" @@ -6458,7 +6459,7 @@ msgstr "正在同步列印結果。請稍後重試。" msgid "Upload failed\n" msgstr "上傳失敗\n" -msgid "obtaining instance_id failed\n" +msgid "Obtaining instance_id failed\n" msgstr "取得 instance_id 失敗\n" msgid "" @@ -7464,13 +7465,14 @@ msgstr "儲存專案" msgid "Importing Model" msgstr "正在匯入模型" -msgid "prepare 3MF file..." +#, fuzzy +msgid "Preparing 3MF file..." msgstr "正在準備 3MF 檔案..." msgid "Download failed, unknown file format." msgstr "下載失敗，未知的檔案格式。" -msgid "downloading project..." +msgid "Downloading project..." msgstr "專案下載中..." msgid "Download failed, File size exception." @@ -8345,10 +8347,10 @@ msgstr "預發布環境主機：api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "正式環境" -msgid "debug save button" +msgid "Debug save button" msgstr "儲存" -msgid "save debug settings" +msgid "Save debug settings" msgstr "儲存除錯設定" msgid "DEBUG settings have been saved successfully!" @@ -8643,7 +8645,7 @@ msgstr "" "校正噴嘴偏移以提升列印品質。\n" "*自動模式：列印前檢查是否需要校正。如果不需要則跳過。" -msgid "send completed" +msgid "Send complete" msgstr "傳送完成" msgid "Error code" @@ -10435,7 +10437,7 @@ msgstr "X 方向移動 10mm" msgid "Movement step set to 1 mm" msgstr "沿 X、Y 軸以 1mm 為單位步進移動" -msgid "keyboard 1-9: set filament for object/part" +msgid "Keyboard 1-9: set filament for object/part" msgstr "按鍵 １～９：設定物件/零件的線材" msgid "Camera view - Default" @@ -18018,7 +18020,7 @@ msgstr "噴嘴資訊" msgid "Plate Type" msgstr "熱床類型" -msgid "filament position" +msgid "Filament position" msgstr "線材位置" msgid "Filament For Calibration" @@ -19826,7 +19828,7 @@ msgstr "無歷史記錄！" msgid "Upgrading" msgstr "升級中" -msgid "syncing" +msgid "Syncing" msgstr "同步中" msgid "Printing Finish" diff --git a/src/slic3r/GUI/CalibrationWizardPresetPage.cpp b/src/slic3r/GUI/CalibrationWizardPresetPage.cpp index ae7631bb54..d944c8b2d1 100644 --- a/src/slic3r/GUI/CalibrationWizardPresetPage.cpp +++ b/src/slic3r/GUI/CalibrationWizardPresetPage.cpp @@ -764,7 +764,7 @@ void CalibrationPresetPage::create_selection_panel(wxWindow* parent) m_filament_from_panel = new wxPanel(parent); m_filament_from_panel->Hide(); auto filament_from_sizer = new wxBoxSizer(wxVERTICAL); - auto filament_from_text = new Label(m_filament_from_panel, _L("filament position")); + auto filament_from_text = new Label(m_filament_from_panel, _L("Filament position")); filament_from_text->SetFont(Label::Head_14); filament_from_sizer->Add(filament_from_text, 0); diff --git a/src/slic3r/GUI/DeviceManager.cpp b/src/slic3r/GUI/DeviceManager.cpp index 1542b5fbef..6233ce9355 100644 --- a/src/slic3r/GUI/DeviceManager.cpp +++ b/src/slic3r/GUI/DeviceManager.cpp @@ -150,7 +150,7 @@ wxString Slic3r::get_stage_string(int stage) case 39: return _L("Nozzle offset calibration"); case 40: - return _L("high temperature auto bed leveling"); + return _L("High temperature auto bed leveling"); case 41: return _L("Auto Check: Quick Release Lever"); case 42: diff --git a/src/slic3r/GUI/DownloadProgressDialog.cpp b/src/slic3r/GUI/DownloadProgressDialog.cpp index a67e34a3b3..343fda5bc1 100644 --- a/src/slic3r/GUI/DownloadProgressDialog.cpp +++ b/src/slic3r/GUI/DownloadProgressDialog.cpp @@ -76,7 +76,7 @@ DownloadProgressDialog::DownloadProgressDialog(wxString title) sizer_download_failed->Add(m_statictext_download_failed, 0, wxALIGN_CENTER | wxALL, 5); // ORCA standardized HyperLink - auto m_download_hyperlink = new HyperLink(m_panel_download_failed, _L("click here to see more info"), download_failed_url); + auto m_download_hyperlink = new HyperLink(m_panel_download_failed, _L("Click here to see more info"), download_failed_url); sizer_download_failed->Add(m_download_hyperlink, 0, wxALIGN_CENTER | wxALL, 5); @@ -98,7 +98,7 @@ DownloadProgressDialog::DownloadProgressDialog(wxString title) sizer_install_failed->Add(m_statictext_install_failed, 0, wxALIGN_CENTER | wxALL, 5); // ORCA standardized HyperLink - auto m_install_hyperlink = new HyperLink(m_panel_install_failed, _L("click here to see more info"), install_failed_url); + auto m_install_hyperlink = new HyperLink(m_panel_install_failed, _L("Click here to see more info"), install_failed_url); sizer_install_failed->Add(m_install_hyperlink, 0, wxALIGN_CENTER | wxALL, 5); diff --git a/src/slic3r/GUI/GCodeViewer.cpp b/src/slic3r/GUI/GCodeViewer.cpp index dacd474443..e162043557 100644 --- a/src/slic3r/GUI/GCodeViewer.cpp +++ b/src/slic3r/GUI/GCodeViewer.cpp @@ -3666,7 +3666,7 @@ void GCodeViewer::render_legend(float &legend_height, int canvas_width, int canv append_headers({ {_u8L("Options"), offsets[0] }, { _u8L("Display"), offsets[1]} }); const bool travel_visible = m_viewer.is_option_visible(libvgcode::EOptionType::Travels); ImGui::PushStyleVar(ImGuiStyleVar_ItemSpacing, ImVec2(0.0f, 3.0f)); - append_item(EItemType::None, libvgcode::convert(m_viewer.get_option_color(libvgcode::EOptionType::Travels)), { {_u8L("travel"), offsets[0] }}, true, predictable_icon_pos/*ORCA checkbox_pos*/, travel_visible, [this, travel_visible]() { + append_item(EItemType::None, libvgcode::convert(m_viewer.get_option_color(libvgcode::EOptionType::Travels)), { {_u8L("Travel"), offsets[0] }}, true, predictable_icon_pos/*ORCA checkbox_pos*/, travel_visible, [this, travel_visible]() { m_viewer.toggle_option_visibility(libvgcode::EOptionType::Travels); // refresh(*m_gcode_result, wxGetApp().plater()->get_extruder_colors_from_plater_config(m_gcode_result)); update_moves_slider(); @@ -3683,7 +3683,7 @@ void GCodeViewer::render_legend(float &legend_height, int canvas_width, int canv append_headers({ {_u8L("Options"), offsets[0] }, { _u8L("Display"), offsets[1]} }); const bool travel_visible = m_viewer.is_option_visible(libvgcode::EOptionType::Travels); ImGui::PushStyleVar(ImGuiStyleVar_ItemSpacing, ImVec2(0.0f, 3.0f)); - append_item(EItemType::None, libvgcode::convert(m_viewer.get_option_color(libvgcode::EOptionType::Travels)), { {_u8L("travel"), offsets[0] }}, true, predictable_icon_pos/*ORCA checkbox_pos*/, travel_visible, [this, travel_visible]() { + append_item(EItemType::None, libvgcode::convert(m_viewer.get_option_color(libvgcode::EOptionType::Travels)), { {_u8L("Travel"), offsets[0] }}, true, predictable_icon_pos/*ORCA checkbox_pos*/, travel_visible, [this, travel_visible]() { m_viewer.toggle_option_visibility(libvgcode::EOptionType::Travels); // refresh(*m_gcode_result, wxGetApp().plater()->get_extruder_colors_from_plater_config(m_gcode_result)); update_moves_slider(); diff --git a/src/slic3r/GUI/GLCanvas3D.cpp b/src/slic3r/GUI/GLCanvas3D.cpp index f482799c24..2f11eef0c4 100644 --- a/src/slic3r/GUI/GLCanvas3D.cpp +++ b/src/slic3r/GUI/GLCanvas3D.cpp @@ -1216,12 +1216,12 @@ GLCanvas3D::GLCanvas3D(wxGLCanvas* canvas, Bed3D &bed) m_selection.set_volumes(&m_volumes.volumes); m_assembly_view_desc["object_selection_caption"] = _L("Left mouse button"); - m_assembly_view_desc["object_selection"] = _L("object selection"); + m_assembly_view_desc["object_selection"] = _L("Object selection"); // FIXME: maybe should be using GUI::shortkey_alt_prefix() or equivalent? m_assembly_view_desc["part_selection_caption"] = _L("Alt+") + _L("Left mouse button"); - m_assembly_view_desc["part_selection"] = _L("part selection"); + m_assembly_view_desc["part_selection"] = _L("Part selection"); m_assembly_view_desc["number_key_caption"] = "1~16 " + _L("number keys"); - m_assembly_view_desc["number_key"] = _L("number keys can quickly change the color of objects"); + m_assembly_view_desc["number_key"] = _L("Number keys can quickly change the color of objects"); } GLCanvas3D::~GLCanvas3D() @@ -8926,7 +8926,7 @@ void GLCanvas3D::_render_assemble_control() caption_max = std::max(caption_max, imgui->calc_text_size(m_assembly_view_desc.at(t + "_caption")).x); } const ImVec2 pos = ImGui::GetCursorScreenPos(); - const float text_y =imgui->calc_text_size(_L("part selection")).y; + const float text_y = imgui->calc_text_size(_L("Part selection")).y; float get_cur_x = pos.x; float get_cur_y = pos.y - ImGui::GetFrameHeight() - 4 * text_y; tip_icon_size =_show_assembly_tooltip_information(caption_max, get_cur_x, get_cur_y); @@ -9647,7 +9647,7 @@ void GLCanvas3D::_set_warning_notification(EWarning warning, bool state) warning += std::to_string(filament + 1); warning += " "; } - text = (boost::format(_u8L("filaments %s cannot be printed directly on the surface of this plate.")) % warning).str(); + text = (boost::format(_u8L("Filaments %s cannot be printed directly on the surface of this plate.")) % warning).str(); error = ErrorType::SLICING_ERROR; break; } diff --git a/src/slic3r/GUI/GUI_Factories.cpp b/src/slic3r/GUI/GUI_Factories.cpp index 627fb0e37e..93f0f4363b 100644 --- a/src/slic3r/GUI/GUI_Factories.cpp +++ b/src/slic3r/GUI/GUI_Factories.cpp @@ -1572,7 +1572,7 @@ void MenuFactory::create_plate_menu() { wxMenu* menu = &m_plate_menu; // select objects on current plate - append_menu_item(menu, wxID_ANY, _L("Select All"), _L("select all objects on current plate"), + append_menu_item(menu, wxID_ANY, _L("Select All"), _L("Select all objects on the current plate"), [](wxCommandEvent&) { plater()->select_curr_plate_all(); }, "", nullptr, []() { @@ -1582,7 +1582,7 @@ void MenuFactory::create_plate_menu() }, m_parent); // select objects on all plates - append_menu_item(menu, wxID_ANY, _L("Select All Plates"), _L("select all objects on all plates"), + append_menu_item(menu, wxID_ANY, _L("Select All Plates"), _L("Select all objects on all plates"), [](wxCommandEvent&) { plater()->select_all(); }, "", nullptr, []() { @@ -1590,7 +1590,7 @@ void MenuFactory::create_plate_menu() }, m_parent); // delete objects on current plate - append_menu_item(menu, wxID_ANY, _L("Delete All"), _L("delete all objects on current plate"), + append_menu_item(menu, wxID_ANY, _L("Delete All"), _L("Delete all objects on the current plate"), [](wxCommandEvent&) { plater()->remove_curr_plate_all(); }, "", nullptr, []() { @@ -1600,7 +1600,7 @@ void MenuFactory::create_plate_menu() }, m_parent); // arrange objects on current plate - append_menu_item(menu, wxID_ANY, _L("Arrange"), _L("arrange current plate"), + append_menu_item(menu, wxID_ANY, _L("Arrange"), _L("Arrange current plate"), [](wxCommandEvent&) { PartPlate* plate = plater()->get_partplate_list().get_selected_plate(); assert(plate); @@ -1614,7 +1614,7 @@ void MenuFactory::create_plate_menu() // reload all objects on current plate append_menu_item( - menu, wxID_ANY, _L("Reload All"), _L("reload all from disk"), + menu, wxID_ANY, _L("Reload All"), _L("Reload all from disk"), [](wxCommandEvent&) { PartPlate* plate = plater()->get_partplate_list().get_selected_plate(); assert(plate); @@ -1624,7 +1624,7 @@ void MenuFactory::create_plate_menu() "", nullptr, []() { return !plater()->get_partplate_list().get_selected_plate()->get_objects().empty(); }, m_parent); // orient objects on current plate - append_menu_item(menu, wxID_ANY, _L("Auto Rotate"), _L("auto rotate current plate"), + append_menu_item(menu, wxID_ANY, _L("Auto Rotate"), _L("Auto rotate current plate"), [](wxCommandEvent&) { PartPlate* plate = plater()->get_partplate_list().get_selected_plate(); assert(plate); diff --git a/src/slic3r/GUI/GUI_ObjectTable.cpp b/src/slic3r/GUI/GUI_ObjectTable.cpp index 35df1f460e..103b15b1f3 100644 --- a/src/slic3r/GUI/GUI_ObjectTable.cpp +++ b/src/slic3r/GUI/GUI_ObjectTable.cpp @@ -1070,7 +1070,7 @@ void ObjectGrid::paste_data( wxTextDataObject& text_data ) if ((src_row_cnt == 1) && (src_col_cnt == 1)) { if ((dst_col_cnt != 1) || (dst_left_col != src_left_col)) { - wxLogWarning(_L("one cell can only be copied to one or multiple cells in the same column")); + wxLogWarning(_L("One cell can only be copied to one or more cells in the same column.")); } else { split(buf, string_array); diff --git a/src/slic3r/GUI/Gizmos/GLGizmoAdvancedCut.cpp b/src/slic3r/GUI/Gizmos/GLGizmoAdvancedCut.cpp index 8c6349f58f..18b9c0a52a 100644 --- a/src/slic3r/GUI/Gizmos/GLGizmoAdvancedCut.cpp +++ b/src/slic3r/GUI/Gizmos/GLGizmoAdvancedCut.cpp @@ -668,7 +668,7 @@ void GLGizmoAdvancedCut::perform_cut(const Selection& selection) if (its_num_open_edges(new_objects[i]->volumes[j]->mesh().its) > 0) { if (!is_showed_dialog) { is_showed_dialog = true; - MessageDialog dlg(nullptr, _L("non-manifold edges be caused by cut tool, do you want to fix it now?"), "", wxYES | wxNO); + MessageDialog dlg(nullptr, _L("Non-manifold edges be caused by cut tool, do you want to fix it now?"), "", wxYES | wxNO); int ret = dlg.ShowModal(); if (ret == wxID_YES) { user_fix_model = true; diff --git a/src/slic3r/GUI/Gizmos/GLGizmoCut.cpp b/src/slic3r/GUI/Gizmos/GLGizmoCut.cpp index efe9a22a40..6fd46589ea 100644 --- a/src/slic3r/GUI/Gizmos/GLGizmoCut.cpp +++ b/src/slic3r/GUI/Gizmos/GLGizmoCut.cpp @@ -3376,7 +3376,7 @@ void GLGizmoCut3D::perform_cut(const Selection& selection) if (its_num_open_edges(new_objects[i]->volumes[j]->mesh().its) > 0) { if (!is_showed_dialog) { is_showed_dialog = true; - MessageDialog dlg(nullptr, _L("non-manifold edges be caused by cut tool, do you want to fix it now?"), "", wxYES | wxCANCEL); + MessageDialog dlg(nullptr, _L("Non-manifold edges be caused by cut tool, do you want to fix it now?"), "", wxYES | wxCANCEL); int ret = dlg.ShowModal(); if (ret == wxID_YES) { user_fix_model = true; diff --git a/src/slic3r/GUI/Gizmos/GizmoObjectManipulation.cpp b/src/slic3r/GUI/Gizmos/GizmoObjectManipulation.cpp index cbf7e4d6ab..457274e32f 100644 --- a/src/slic3r/GUI/Gizmos/GizmoObjectManipulation.cpp +++ b/src/slic3r/GUI/Gizmos/GizmoObjectManipulation.cpp @@ -1332,7 +1332,7 @@ void GizmoObjectManipulation::do_render_scale_input_window(ImGuiWrapper* imgui_w is_avoid_one_update = true; } - auto uniform_scale_size =imgui_wrapper->calc_text_size(_L("uniform scale")).x; + auto uniform_scale_size =imgui_wrapper->calc_text_size(_L("Uniform scale")).x; ImGui::PushItemWidth(uniform_scale_size); int size_sel{-1}; if (!is_avoid_one_update) { @@ -1348,10 +1348,10 @@ void GizmoObjectManipulation::do_render_scale_input_window(ImGuiWrapper* imgui_w //if (uniform_scale_only) { // imgui_wrapper->disabled_begin(true); - // imgui_wrapper->bbl_checkbox(_L("uniform scale"), uniform_scale_only); + // imgui_wrapper->bbl_checkbox(_L("Uniform scale"), uniform_scale_only); // imgui_wrapper->disabled_end(); //} else { - imgui_wrapper->bbl_checkbox(_L("uniform scale"), uniform_scale); + imgui_wrapper->bbl_checkbox(_L("Uniform scale"), uniform_scale); //} if (uniform_scale != this->m_uniform_scale) { this->set_uniform_scaling(uniform_scale); } diff --git a/src/slic3r/GUI/KBShortcutsDialog.cpp b/src/slic3r/GUI/KBShortcutsDialog.cpp index 62917ee64b..ae01c139bc 100644 --- a/src/slic3r/GUI/KBShortcutsDialog.cpp +++ b/src/slic3r/GUI/KBShortcutsDialog.cpp @@ -231,7 +231,7 @@ void KBShortcutsDialog::fill_shortcuts() {L("Arrow Right"), L("Move selection 10 mm in positive X direction")}, {shift + L("Any arrow"), L("Movement step set to 1 mm")}, {L("Esc"), L("Deselect all")}, - {"1-9", L("keyboard 1-9: set filament for object/part")}, + {"1-9", L("Keyboard 1-9: set filament for object/part")}, {ctrl + "0", L("Camera view - Default")}, {ctrl + "1", L("Camera view - Top")}, {ctrl + "2", L("Camera view - Bottom")}, diff --git a/src/slic3r/GUI/MultiMachine.cpp b/src/slic3r/GUI/MultiMachine.cpp index 9919d05dfa..f5ffd1319f 100644 --- a/src/slic3r/GUI/MultiMachine.cpp +++ b/src/slic3r/GUI/MultiMachine.cpp @@ -147,7 +147,7 @@ wxString DeviceItem::get_state_printable() str_state_printable.push_back(_L("Printing")); str_state_printable.push_back(_L("Upgrading")); str_state_printable.push_back(_L("Incompatible")); - str_state_printable.push_back(_L("syncing")); + str_state_printable.push_back(_L("Syncing")); return str_state_printable[state_printable]; } @@ -163,7 +163,7 @@ wxString DeviceItem::get_state_device() str_state_device.push_back(_L("Printing Pause")); str_state_device.push_back(_L("Prepare")); str_state_device.push_back(_L("Slicing")); - str_state_device.push_back(_L("syncing")); + str_state_device.push_back(_L("Syncing")); return str_state_device[state_device]; } diff --git a/src/slic3r/GUI/Plater.cpp b/src/slic3r/GUI/Plater.cpp index 8af66fecc3..de7e7fbc9e 100644 --- a/src/slic3r/GUI/Plater.cpp +++ b/src/slic3r/GUI/Plater.cpp @@ -11948,7 +11948,7 @@ void Plater::import_model_id(wxString download_info) int res = 0; std::string http_body; - msg = _L("prepare 3MF file..."); + msg = _L("Preparing 3MF file..."); //gets the number of files with the same name std::vector vecFiles; @@ -11997,7 +11997,7 @@ void Plater::import_model_id(wxString download_info) } - msg = _L("downloading project..."); + msg = _L("Downloading project..."); //target_path = wxStandardPaths::Get().GetTempDir().utf8_str().data(); diff --git a/src/slic3r/GUI/Preferences.cpp b/src/slic3r/GUI/Preferences.cpp index 30cff2490f..2494cf5402 100644 --- a/src/slic3r/GUI/Preferences.cpp +++ b/src/slic3r/GUI/Preferences.cpp @@ -1859,12 +1859,12 @@ wxBoxSizer* PreferencesDialog::create_debug_page() radio_group->SetSelection(3); } - Button* debug_button = new Button(m_parent, _L("debug save button")); + Button* debug_button = new Button(m_parent, _L("Debug save button")); debug_button->SetStyle(ButtonStyle::Confirm, ButtonType::Window); debug_button->Bind(wxEVT_LEFT_DOWN, [this, radio_group](wxMouseEvent &e) { // success message box - MessageDialog dialog(this, _L("save debug settings"), _L("DEBUG settings have been saved successfully!"), wxNO_DEFAULT | wxYES_NO | wxICON_INFORMATION); + MessageDialog dialog(this, _L("Save debug settings"), _L("DEBUG settings have been saved successfully!"), wxNO_DEFAULT | wxYES_NO | wxICON_INFORMATION); dialog.SetSize(400,-1); switch (dialog.ShowModal()) { case wxID_NO: { diff --git a/src/slic3r/GUI/SelectMachine.cpp b/src/slic3r/GUI/SelectMachine.cpp index 424f0febd3..f03ba19fe7 100644 --- a/src/slic3r/GUI/SelectMachine.cpp +++ b/src/slic3r/GUI/SelectMachine.cpp @@ -607,7 +607,7 @@ SelectMachineDialog::SelectMachineDialog(Plater *plater) auto completedimg = new wxStaticBitmap(m_panel_finish, wxID_ANY, create_scaled_bitmap("completed", m_panel_finish, 25), wxDefaultPosition, wxSize(imgsize, imgsize), 0); m_sizer_finish_h->Add(completedimg, 0, wxALIGN_CENTER | wxALL, FromDIP(5)); - m_statictext_finish = new wxStaticText(m_panel_finish, wxID_ANY, L("send completed"), wxDefaultPosition, wxDefaultSize, 0); + m_statictext_finish = new wxStaticText(m_panel_finish, wxID_ANY, L("Send complete"), wxDefaultPosition, wxDefaultSize, 0); m_statictext_finish->Wrap(-1); m_statictext_finish->SetForegroundColour(wxColour(0, 150, 136)); m_sizer_finish_h->Add(m_statictext_finish, 0, wxALIGN_CENTER | wxALL, FromDIP(5)); diff --git a/src/slic3r/GUI/SendToPrinter.cpp b/src/slic3r/GUI/SendToPrinter.cpp index 54bdf3a458..1cc0e66b76 100644 --- a/src/slic3r/GUI/SendToPrinter.cpp +++ b/src/slic3r/GUI/SendToPrinter.cpp @@ -367,7 +367,7 @@ SendToPrinterDialog::SendToPrinterDialog(Plater *plater) auto completedimg = new wxStaticBitmap(m_panel_finish, wxID_ANY, create_scaled_bitmap("completed", m_panel_finish, 25), wxDefaultPosition, wxSize(imgsize, imgsize), 0); m_sizer_finish_h->Add(completedimg, 0, wxALIGN_CENTER | wxALL, FromDIP(5)); - m_statictext_finish = new wxStaticText(m_panel_finish, wxID_ANY, L("send completed"), wxDefaultPosition, wxDefaultSize, 0); + m_statictext_finish = new wxStaticText(m_panel_finish, wxID_ANY, L("Send complete"), wxDefaultPosition, wxDefaultSize, 0); m_statictext_finish->Wrap(-1); m_statictext_finish->SetForegroundColour(wxColour(0, 150, 136)); m_sizer_finish_h->Add(m_statictext_finish, 0, wxALIGN_CENTER | wxALL, FromDIP(5)); diff --git a/src/slic3r/GUI/StatusPanel.cpp b/src/slic3r/GUI/StatusPanel.cpp index 190ed93ed6..651e1c6f5b 100644 --- a/src/slic3r/GUI/StatusPanel.cpp +++ b/src/slic3r/GUI/StatusPanel.cpp @@ -5891,7 +5891,7 @@ wxBoxSizer *ScoreDialog::get_button_sizer() if (ret == -1) error_info += _L("Upload failed\n").ToUTF8().data(); else - error_info += _L("obtaining instance_id failed\n").ToUTF8().data(); + error_info += _L("Obtaining instance_id failed\n").ToUTF8().data(); if (!error_info.empty()) { BOOST_LOG_TRIVIAL(info) << error_info; } dlg_info = new MessageDialog(this,