1289 commits

Author	SHA1	Message	Date
Jaime van Kessel	f03b6cc7dc	Add some max values for FDMPrinter temperatures ... Marlin breaks on anything above it, so these seem like sensible defaults A-6.1 (WhiteHats)	2020-01-31 16:21:59 +01:00
Ghostkeeper	32d94f76f1	Merge branch 'mb-fuzzy-outside-only' of https://github.com/smartavionics/Cura into smartavionics-mb-fuzzy-outside-only	2020-01-31 13:10:45 +01:00
Kostas Karmas	bcec433f53	Update description of the Print Sequence setting ... Update description to clearly state that Print Sequence is not possible if more than one extruders are enabled. CURA-6914	2020-01-24 17:30:46 +01:00
Ghostkeeper	5d21872e50	Take nozzle offsets into account when placing prime tower ... extruderValues('machine_nozzle_offset_x') := [0, 20, -18] map(abs(extruderValues('machine_nozzle_offset_x') := [0, 20, 18] max(map(abs(extruderValues('machine_nozzle_offset_x') := 20 So we take the highest offset of all extruders to get the area that can be reached by all extruders. And we take the abs() of all extruder values because positive or negative only means that the other extruders get offset in the same direction. Fixes #6997.	2020-01-21 10:31:47 +01:00
Ghostkeeper	92926cfc21	Revert "Limit retraction_combing_max_distance to be no lower than retraction_min_travel" ... This reverts commit 3b1e88e49c. It was changing the default behaviour for these printers. Contributes to issue CURA-6860.	2020-01-20 10:47:46 +01:00
Ghostkeeper	3b1e88e49c	Limit retraction_combing_max_distance to be no lower than retraction_min_travel ... Retraction_min_travel overrides retraction_combing_max_distance in CuraEngine, so it has no effect to make it any lower. Contributes to issue CURA-6860.	2020-01-20 09:41:48 +01:00
Kostas Karmas	3ce52423fa	Change description of nozzle wipes settings ... CURA-6968	2020-01-09 15:06:58 +01:00
Remco Burema	1f722d4de0	Minimum support area was always supposed to be small.	2020-01-08 16:28:28 +01:00
Mark Burton	d388f2463b	Add fuzzy skin outside only option.	2020-01-04 09:14:13 +00:00
Ghostkeeper	8f7642931b	Only enable extruder switch retraction settings if multi-extrusion ... Otherwise there can't be any extruder switches.	2020-01-03 10:38:54 +01:00
Ghostkeeper	5e0324b9be	Move retraction settings to travel category ... And the nozzle switch settings to the multi-extrusion category. As discussed with the CCB.	2020-01-03 10:36:27 +01:00
Ghostkeeper	c7dbb1477a	Remove maximum on small feature speed ... You can make the small features print FASTER if you like, as well. There is no physical or computational constraint there. Discovered during investigation of #6866.	2019-12-31 11:07:11 +01:00
Remco Burema	04125d4608	Merge pull request #6541 from Ultimaker/default_union_off_for_surface_mode ... turn off Union overlapping volumes when Surface mode is Surface only	2019-12-24 14:39:03 +01:00
Ghostkeeper	8a9b791298	Merge branch '4.4' ... Conflicts: cura/Machines/MaterialNode.py -> Due to some automated formatting tool. Please disable those tools, people.	2019-12-23 16:26:25 +01:00
Ghostkeeper	ce5f7ce821	Make support wall line count visible when tree support is enabled ... Oops, otherwise this can't be used (found during testing). Contributes to issue CURA-7077.	2019-12-23 16:22:17 +01:00
Ghostkeeper	a3c5435a1d	Remove support_tree_wall_thickness ... This setting will not be automatically translated to support_wall_thickness if it's overwritten, because that would require knowing the line width and we don't know that here. So it's hard to do. Contributes to issue CURA-7077.	2019-12-23 16:22:17 +01:00
Ghostkeeper	50f64ca696	Merge support_tree_wall_count into support_wall_count ... So now the two settings are used as one. Contributes to issue CURA-7077.	2019-12-23 16:22:17 +01:00
Ghostkeeper	0028cc85ed	Remove comment documenting commit history ... Use the commit history to document the commit history. This solves a log warning about unknown data type for skin_edge_support_thickness.	2019-12-23 09:08:47 +01:00
Nino van Hooff	ff01b1dab9	Add 6 Material Station specific material settings. ... These settings are currently unused by cura, but passed into the PPA output. Some considerations: - material_ prepended to all. Even though they are not all material specific. The consistency is more developer-friendly imho - defaults taken from generic_pla - type is float for all, consistent with what I found in this file CURA-7041	2019-12-18 11:46:40 +01:00
Mark Burton	678ba61bca	Add brim gap setting (#6279) ... Added brim_gap setting to space brim away from edge of model.	2019-12-16 13:55:08 +01:00
Remco Burema	8cc054cecc	Add missing 'material break preparation temperature'. ... part of CURA-6971 (cherry picked from commit 25f0460231)	2019-12-12 14:09:46 +01:00
Remco Burema	2d486b0814	Default behaviour should be the same as previous. ... Also added the new setting to 'expert' visibility.	2019-12-11 17:00:02 +01:00
Lipu Fei	820925c9aa	Merge branch 'master' into default_union_off_for_surface_mode	2019-12-11 10:58:27 +01:00
Remco Burema	f0b277d491	Merge branch 'mb-skin-edge-support' of https://github.com/smartavionics/Cura into smartavionics-mb-skin-edge-support	2019-12-10 16:55:28 +01:00
Jaime van Kessel	f66b1e6fde	Merge branch 'master' of github.com:Ultimaker/Cura into CURA-6522_revert_edge_distance_hack	2019-12-10 13:06:37 +01:00
Jaime van Kessel	7ba1db830a	Re-enable the retraction min travel setting ... CURA-6675	2019-12-10 13:00:29 +01:00
Jaime van Kessel	b5bf3e8e85	Merge branch 'mb-bridge-skin-over-sparse-infill' of https://github.com/smartavionics/Cura	2019-11-26 15:41:04 +01:00
Remco Burema	25f0460231	Add missing 'material break preparation temperature'. ... part of CURA-6971	2019-11-22 12:01:46 +01:00
Jaime van Kessel	50d72692d8	Merge branch 'master' of github.com:Ultimaker/Cura into CURA-6522_one_at_a_time_overlapping_build_area	2019-11-20 16:48:00 +01:00
Jaime van Kessel	266f7d1f74	Also bump up the version nr of FDMExtruder & FDMPrinter ... CURA-6522	2019-11-20 16:39:38 +01:00
Jaime van Kessel	c65ccf29b0	Merge branch 'mb-shared-heater' of https://github.com/smartavionics/Cura	2019-11-14 11:06:12 +01:00
Nino van Hooff	254dde5b05	REmove duplicate key machine_head_with_fans_polygon	2019-11-11 15:02:49 +01:00
Ghostkeeper	d25ca84c6c	Make small feature max length a child setting of small hole max size ... The small hole max size is not used in CuraEngine. It may not be a leaf setting then. Instead, Small Feature Max Length is used which is directly dependent on Small Hole Max Size. They are simply different units of the same thing. This is how we should structure these settings then.	2019-11-03 02:20:18 +01:00
Ghostkeeper	0c846d76a1	Correct setting name and description of wipe Z hop ... This hop is executed regardless of whether or not the wipe is retracted.	2019-11-03 01:41:51 +01:00
Ghostkeeper	e2b8a44e2d	Better defaults for retraction and z hop during wipe ... Let's use the normal retraction and z hop settings to be safe. Should work fine.	2019-11-03 01:18:35 +01:00
Ghostkeeper	0b6938e9aa	Specify that this setting is about wiping	2019-11-03 01:14:38 +01:00
Ghostkeeper	eaedca1917	Convert unit of adaptive layers threshold and change name ... This usage is hopefully more intuitive than the previous one.	2019-11-01 11:54:17 +01:00
Nino van Hooff	249a66ebd9	Merge machine_head_polygon and machine_head_with_fans_polygon defs. ... There is no usecase for having both. when a definition has both, the head is removed. when it has only head, it is renamed to _with_fans CURA-6522	2019-10-31 16:38:00 +01:00
Ghostkeeper	0ea67d18d2	Only show strategy-specific settings if their WP strategy is activated ... Reduces confusion, I hope, and the feeling of being overwhelmed by a load of settings, because obviously only people who make all settings visible are going to see these settings at all.	2019-10-27 01:00:17 +02:00
Ghostkeeper	7dada6539c	Fix minimum speeds and distances for wire printing ... Minimum distance is 0.001, i.e. one micrometre. Minimum speeds are set to Marlin's Minimum Planner Speed which is hardcoded.	2019-10-26 01:12:34 +02:00
Ghostkeeper	11d30dab56	Improve setting descriptions for flow rate compensation settings ... The original setting descriptions were wholly undescriptive... Done during investigation of these settings for the Setting Guide.	2019-10-25 23:21:30 +02:00
Ghostkeeper	cb9b385a85	Remove Alternate Skin Rotations setting ... It's been replaced completely by the Top/Bottom Line Directions setting.	2019-10-22 13:46:42 +02:00
Lipu Fei	cd0dbb3902	Fix defaultExtruderPosition() usage in fdmprinter ... CURA-6913 getDefaultValueInExtruder() expects the extruder_position to be an int, but defaultExtruderPosition() returns a str. This will cause the formula evaluation to fail.	2019-10-21 09:22:55 +02:00
Ghostkeeper	8cd583ad33	Only show conical support min width if angle is positive ... If the angle is 0 or negative, this setting won't have any effect since the support cannot be made wider than it already is using this setting. It can only prevent it from becoming smaller, and it will only become smaller from a positive conical support angle. Discovered during work on the Settings Guide.	2019-10-21 01:48:01 +02:00
Remco Burema	15bdf0fa1c	Change the description of 'Initial Bottom Layers'. ... part of CURA-5918	2019-10-18 14:00:16 +02:00
Remco Burema	1885dddf45	Merge branch 'feat_open_top_bottom' of https://github.com/BagelOrb/Cura into BagelOrb-feat_open_top_bottom	2019-10-18 12:55:52 +02:00
Ghostkeeper	84c9b28bb2	Move maximum resolution itself out of experimental as well ... This was forgotten accidentally, it seems.	2019-10-18 00:07:43 +02:00
Ghostkeeper	ad5fae5b66	Only allow optimising infill travels when combing is enabled ... That's the only time when it will have any effect, since the only thing this does is to calculate the distance to the next infill line better if the nozzle has to make a detour due to combing.	2019-10-17 01:29:24 +02:00
Tim Kuipers	1b383736ab	turn off Union overlapping volumes when Surface mode is Surface only	2019-10-16 12:51:05 +02:00
Ghostkeeper	cf14fa6820	Merge branch 'feature_intent' ... Here we go! Contributes to issue CURA-6864.	2019-10-08 13:17:54 +02:00