diff --git a/config/examples/BIQU/BX/Configuration.h b/config/examples/BIQU/BX/Configuration.h
index 8807b576e0..da9ed5b4b4 100644
--- a/config/examples/BIQU/BX/Configuration.h
+++ b/config/examples/BIQU/BX/Configuration.h
@@ -2262,7 +2262,7 @@
 
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z_raise }
-  #define NOZZLE_PARK_POINT { (X_MAX_POS - 10), (Y_MIN_POS + 10), 20 }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MIN_POS + 10), 20 }
   #define NOZZLE_PARK_MOVE          0   // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
diff --git a/config/examples/BIQU/BX/README.md b/config/examples/BIQU/BX/README.md
index bce822c3df..c7543fd13e 100644
--- a/config/examples/BIQU/BX/README.md
+++ b/config/examples/BIQU/BX/README.md
@@ -1,5 +1,5 @@
 # Biqu BX Configuration
 
-Uncomment `#define MOTHERBOARD BOARD_BTT_SKR_SE_BX_V3` to enable BTT SKR SE BX V3.0 motherboard, otherwise V2.0 is assumed.
+In `Configuration.h` enable the `MOTHERBOARD BOARD_BTT_SKR_SE_BX_V3` option at the top to specify the BTT SKR SE BX V3.0 motherboard, otherwise the V2.0 board will be applied (slightly farther down).
 
-Uncomment `BX_ALL_METAL_HOTEND` to enable higher printing temperatures for newer H2 extruder with all metal heatbreak.
+Enable the `BX_ALL_METAL_HOTEND` option to permit higher printing temperatures for the newer H2 extruder with an all-metal heatbreak.