mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2026-03-05 17:44:38 -07:00
upated Configuration.h
This commit is contained in:
ellensp
parent
3f6c12ee06
commit
dba15d7855
1 changed files with 41 additions and 43 deletions
|
|
@ -63,14 +63,14 @@
|
|||
// @section info
|
||||
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "(MarlinFirmware)" // Original author or contributor.
|
||||
#define STRING_CONFIG_H_AUTHOR "R Brown, Tevo Tarantula" // Original author or contributor.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
// @section machine
|
||||
|
||||
// Choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#define MOTHERBOARD BOARD_MKS_BASE_15
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
|
@ -96,7 +96,7 @@
|
|||
*
|
||||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
#define BAUDRATE 115200
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
|
|
@ -137,7 +137,7 @@
|
|||
//#define BLUETOOTH
|
||||
|
||||
// Name displayed in the LCD "Ready" message and Info menu
|
||||
//#define CUSTOM_MACHINE_NAME "3D Printer"
|
||||
#define CUSTOM_MACHINE_NAME "Tevo Tarantula"
|
||||
//#define CONFIGURABLE_MACHINE_NAME // Add G-code M550 to set/report the machine name
|
||||
|
||||
// Printer's unique ID, used by some programs to differentiate between machines.
|
||||
|
|
@ -734,9 +734,9 @@
|
|||
#define DEFAULT_KI_LIST { 1.08, 1.08 }
|
||||
#define DEFAULT_KD_LIST { 114.00, 114.00 }
|
||||
#else
|
||||
#define DEFAULT_KP 22.20
|
||||
#define DEFAULT_KI 1.08
|
||||
#define DEFAULT_KD 114.00
|
||||
#define DEFAULT_KP 24.72
|
||||
#define DEFAULT_KI 1.84
|
||||
#define DEFAULT_KD 83.02
|
||||
#endif
|
||||
#else
|
||||
#define BANG_MAX 255 // Limit hotend current while in bang-bang mode; 255=full current
|
||||
|
|
@ -825,18 +825,16 @@
|
|||
*
|
||||
* With this option disabled, bang-bang will be used. BED_LIMIT_SWITCHING enables hysteresis.
|
||||
*/
|
||||
//#define PIDTEMPBED
|
||||
#define PIDTEMPBED
|
||||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0 // Min power to improve PID stability (0..MAX_BED_POWER).
|
||||
// Get the power from the temperature report ('M105' => B@:nnn) and try P*2-20 to P*2-10.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port. Use 'M303 D' to enable/disable.
|
||||
|
||||
// 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
#define DEFAULT_BED_KP 10.00
|
||||
#define DEFAULT_BED_KI 0.023
|
||||
#define DEFAULT_BED_KD 305.4
|
||||
#define DEFAULT_BED_KP 841.21
|
||||
#define DEFAULT_BED_KI 165.63
|
||||
#define DEFAULT_BED_KD 1068.13
|
||||
|
||||
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
|
||||
#else
|
||||
|
|
@ -954,7 +952,7 @@
|
|||
* Note: For Bowden Extruders make this large enough to allow load/unload.
|
||||
*/
|
||||
#define PREVENT_LENGTHY_EXTRUDE
|
||||
#define EXTRUDE_MAXLENGTH 200
|
||||
#define EXTRUDE_MAXLENGTH 650
|
||||
|
||||
//===========================================================================
|
||||
//======================== Thermal Runaway Protection =======================
|
||||
|
|
@ -1279,11 +1277,11 @@
|
|||
* Endstop "Hit" State
|
||||
* Set to the state (HIGH or LOW) that applies to each endstop.
|
||||
*/
|
||||
#define X_MIN_ENDSTOP_HIT_STATE HIGH
|
||||
#define X_MIN_ENDSTOP_HIT_STATE LOW
|
||||
#define X_MAX_ENDSTOP_HIT_STATE HIGH
|
||||
#define Y_MIN_ENDSTOP_HIT_STATE HIGH
|
||||
#define Y_MIN_ENDSTOP_HIT_STATE LOW
|
||||
#define Y_MAX_ENDSTOP_HIT_STATE HIGH
|
||||
#define Z_MIN_ENDSTOP_HIT_STATE HIGH
|
||||
#define Z_MIN_ENDSTOP_HIT_STATE LOW
|
||||
#define Z_MAX_ENDSTOP_HIT_STATE HIGH
|
||||
#define I_MIN_ENDSTOP_HIT_STATE HIGH
|
||||
#define I_MAX_ENDSTOP_HIT_STATE HIGH
|
||||
|
|
@ -1345,7 +1343,7 @@
|
|||
* Override with M92 (when enabled below)
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 }
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 1600, 100 }
|
||||
|
||||
/**
|
||||
* Enable support for M92. Disable to save at least ~530 bytes of flash.
|
||||
|
|
@ -1357,7 +1355,7 @@
|
|||
* Override with M203
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
|
||||
#define DEFAULT_MAX_FEEDRATE { 200, 200, 3, 25 }
|
||||
|
||||
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
|
||||
#if ENABLED(LIMITED_MAX_FR_EDITING)
|
||||
|
|
@ -1370,7 +1368,7 @@
|
|||
* Override with M201
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
|
||||
#define DEFAULT_MAX_ACCELERATION { 500, 500, 50, 500 }
|
||||
|
||||
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
|
||||
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
|
||||
|
|
@ -1385,9 +1383,9 @@
|
|||
* M204 R Retract Acceleration
|
||||
* M204 T Travel Acceleration
|
||||
*/
|
||||
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves
|
||||
|
||||
/**
|
||||
* Default Jerk limits (mm/s)
|
||||
|
|
@ -1397,12 +1395,12 @@
|
|||
* When changing speed and direction, if the difference is less than the
|
||||
* value set here, it may happen instantaneously.
|
||||
*/
|
||||
//#define CLASSIC_JERK
|
||||
#define CLASSIC_JERK
|
||||
#if ENABLED(CLASSIC_JERK)
|
||||
#define DEFAULT_XJERK 10.0
|
||||
#define DEFAULT_YJERK 10.0
|
||||
#define DEFAULT_ZJERK 0.3
|
||||
#define DEFAULT_EJERK 5.0
|
||||
#define DEFAULT_XJERK 7.0
|
||||
#define DEFAULT_YJERK 7.0
|
||||
#define DEFAULT_ZJERK 0.2
|
||||
#define DEFAULT_EJERK 2.5
|
||||
//#define DEFAULT_IJERK 0.3
|
||||
//#define DEFAULT_JJERK 0.3
|
||||
//#define DEFAULT_KJERK 0.3
|
||||
|
|
@ -1725,7 +1723,7 @@
|
|||
|
||||
// X and Y axis travel speed between probes.
|
||||
// Leave undefined to use the average of the current XY homing feedrate.
|
||||
#define XY_PROBE_FEEDRATE (133*60) // (mm/min)
|
||||
#define XY_PROBE_FEEDRATE (66*60) // (mm/min)
|
||||
|
||||
// Feedrate for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||
#define Z_PROBE_FEEDRATE_FAST (4*60) // (mm/min)
|
||||
|
|
@ -1881,7 +1879,7 @@
|
|||
|
||||
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||
#define INVERT_X_DIR false
|
||||
#define INVERT_Y_DIR true
|
||||
#define INVERT_Y_DIR false
|
||||
#define INVERT_Z_DIR false
|
||||
//#define INVERT_I_DIR false
|
||||
//#define INVERT_J_DIR false
|
||||
|
|
@ -1912,7 +1910,7 @@
|
|||
*/
|
||||
//#define Z_IDLE_HEIGHT Z_HOME_POS
|
||||
|
||||
//#define Z_CLEARANCE_FOR_HOMING 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
|
||||
#define Z_CLEARANCE_FOR_HOMING 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
|
||||
// You'll need this much clearance above Z_MAX_POS to avoid grinding.
|
||||
|
||||
//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing (if Z was homed)
|
||||
|
|
@ -2507,13 +2505,13 @@
|
|||
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
|
||||
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
|
||||
*/
|
||||
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
|
||||
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
|
||||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
|
||||
#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
|
@ -2546,13 +2544,13 @@
|
|||
// Preheat Constants - Up to 10 are supported without changes
|
||||
//
|
||||
#define PREHEAT_1_LABEL "PLA"
|
||||
#define PREHEAT_1_TEMP_HOTEND 180
|
||||
#define PREHEAT_1_TEMP_BED 70
|
||||
#define PREHEAT_1_TEMP_HOTEND 205
|
||||
#define PREHEAT_1_TEMP_BED 65
|
||||
#define PREHEAT_1_TEMP_CHAMBER 35
|
||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
#define PREHEAT_2_LABEL "ABS"
|
||||
#define PREHEAT_2_TEMP_HOTEND 240
|
||||
#define PREHEAT_2_TEMP_HOTEND 215
|
||||
#define PREHEAT_2_TEMP_BED 110
|
||||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
|
@ -2570,7 +2568,7 @@
|
|||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z_raise }
|
||||
|
|
@ -2706,7 +2704,7 @@
|
|||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
#define PRINTCOUNTER
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print. A value of 0 will save stats at end of print.
|
||||
#endif
|
||||
|
|
@ -2752,7 +2750,7 @@
|
|||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
#define SDSUPPORT
|
||||
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
|
|
@ -2846,7 +2844,7 @@
|
|||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
//#define REVERSE_ENCODER_DIRECTION
|
||||
#define REVERSE_ENCODER_DIRECTION
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction for navigating LCD menus.
|
||||
|
|
@ -2879,7 +2877,7 @@
|
|||
//
|
||||
// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
|
||||
//
|
||||
//#define INDIVIDUAL_AXIS_HOMING_MENU
|
||||
#define INDIVIDUAL_AXIS_HOMING_MENU
|
||||
//#define INDIVIDUAL_AXIS_HOMING_SUBMENU
|
||||
|
||||
//
|
||||
|
|
@ -2924,7 +2922,7 @@
|
|||
//
|
||||
// Note: Usually sold with a white PCB.
|
||||
//
|
||||
//#define REPRAP_DISCOUNT_SMART_CONTROLLER
|
||||
#define REPRAP_DISCOUNT_SMART_CONTROLLER
|
||||
|
||||
//
|
||||
// GT2560 (YHCB2004) LCD Display
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue