From d8bab1c48d31e315165896875ce619f03005dce0 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 27 Nov 2025 17:43:10 -0600 Subject: [PATCH] =?UTF-8?q?=E2=9C=A8=20PLR=5FHEAT=5FBED=5FON=5FREBOOT?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MarlinFirmware/Marlin#26691 --- config/default/Configuration_adv.h | 2 ++ config/examples/3DFabXYZ/Migbot/Configuration_adv.h | 2 ++ config/examples/3DMatik/XL/Configuration_adv.h | 2 ++ config/examples/ADIMLab/Gantry v1/Configuration_adv.h | 2 ++ config/examples/ADIMLab/Gantry v2/Configuration_adv.h | 2 ++ config/examples/Alfawise/U20-bltouch/Configuration_adv.h | 2 ++ config/examples/Alfawise/U20/Configuration_adv.h | 2 ++ config/examples/AliExpress/CL-260/Configuration_adv.h | 2 ++ config/examples/AliExpress/UM2pExt/Configuration_adv.h | 2 ++ config/examples/Anet/A2/Configuration_adv.h | 2 ++ config/examples/Anet/A2plus/Configuration_adv.h | 2 ++ config/examples/Anet/A6/Configuration_adv.h | 2 ++ config/examples/Anet/A8/Configuration_adv.h | 2 ++ config/examples/Anet/A8plus/Configuration_adv.h | 2 ++ config/examples/Anet/A9/Configuration_adv.h | 2 ++ config/examples/Anet/E10/Configuration_adv.h | 2 ++ config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h | 2 ++ config/examples/Anet/E16/Stock/Configuration_adv.h | 2 ++ config/examples/Anet/ET4+/Configuration_adv.h | 2 ++ config/examples/Anet/ET4-Pro/Configuration_adv.h | 2 ++ config/examples/Anet/ET4/Configuration_adv.h | 2 ++ config/examples/Anet/ET4X/Configuration_adv.h | 2 ++ config/examples/Anet/ET5-Pro/Configuration_adv.h | 2 ++ config/examples/Anet/ET5/Configuration_adv.h | 2 ++ config/examples/Anet/ET5X/Configuration_adv.h | 2 ++ config/examples/AnyCubic/Chiron/Configuration_adv.h | 2 ++ .../AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h | 2 ++ .../examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h | 2 ++ .../Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h | 2 ++ config/examples/AnyCubic/Vyper/Configuration_adv.h | 2 ++ .../AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h | 2 ++ .../AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h | 2 ++ config/examples/AnyCubic/i3/Configuration_adv.h | 2 ++ config/examples/ArmEd/Configuration_adv.h | 2 ++ config/examples/Artillery/Genius Pro/Configuration_adv.h | 2 ++ config/examples/Artillery/Genius/BLTouch/Configuration_adv.h | 2 ++ config/examples/Artillery/Genius/V1/Configuration_adv.h | 2 ++ config/examples/Artillery/Hornet/Configuration_adv.h | 2 ++ .../Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h | 2 ++ config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h | 2 ++ config/examples/Artillery/Sidewinder X2/Configuration_adv.h | 2 ++ config/examples/Azteeg/X5GT/Configuration_adv.h | 2 ++ config/examples/BIBO/TouchX/cyclops/Configuration_adv.h | 2 ++ .../examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h | 2 ++ config/examples/BIBO/TouchX/default/Configuration_adv.h | 2 ++ config/examples/BIQU/B1 SE Plus/Configuration_adv.h | 2 ++ config/examples/BIQU/B1 SE/Configuration_adv.h | 2 ++ config/examples/BIQU/B1/Configuration_adv.h | 2 ++ config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h | 2 ++ config/examples/BIQU/BX/base/Configuration_adv.h | 2 ++ config/examples/BIQU/Hurakan/Configuration_adv.h | 2 ++ config/examples/BIQU/Thunder Standard/Configuration_adv.h | 2 ++ config/examples/BQ/Hephestos/Configuration_adv.h | 2 ++ config/examples/BQ/Hephestos_2/Configuration_adv.h | 2 ++ config/examples/BQ/WITBOX/Configuration_adv.h | 2 ++ config/examples/CNC/miniRambo/Configuration_adv.h | 2 ++ config/examples/CTC/A13/Configuration_adv.h | 2 ++ config/examples/CTC/Bizer/Configuration_adv.h | 2 ++ config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h | 2 ++ config/examples/Cartesio/Configuration_adv.h | 2 ++ config/examples/Copymaster3D/300/Configuration_adv.h | 2 ++ config/examples/Copymaster3D/400/Configuration_adv.h | 2 ++ config/examples/Copymaster3D/500/Configuration_adv.h | 2 ++ config/examples/Creality/CR-10 Max/Configuration_adv.h | 2 ++ .../CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 2 ++ .../CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 2 ++ .../examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h | 2 ++ .../examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h | 2 ++ .../examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h | 2 ++ .../Configuration_adv.h | 2 ++ .../CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h | 2 ++ .../examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h | 2 ++ .../CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h | 2 ++ .../CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h | 2 ++ config/examples/Creality/CR-10 V2/Configuration_adv.h | 2 ++ .../CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration_adv.h | 2 ++ config/examples/Creality/CR-10 V3/Stock/Configuration_adv.h | 2 ++ .../CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 2 ++ .../CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 2 ++ config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h | 2 ++ config/examples/Creality/CR-10S Pro/Configuration_adv.h | 2 ++ .../BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h | 2 ++ .../CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h | 2 ++ .../CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 2 ++ .../CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 2 ++ .../CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h | 2 ++ .../Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h | 2 ++ config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h | 2 ++ config/examples/Creality/CR-20 Pro/Configuration_adv.h | 2 ++ .../CR-20/RepRapWorld Minitronics20/Configuration_adv.h | 2 ++ config/examples/Creality/CR-20/Stock/Configuration_adv.h | 2 ++ config/examples/Creality/CR-30 PrintMill/Configuration_adv.h | 2 ++ config/examples/Creality/CR-6 SE/Configuration_adv.h | 2 ++ config/examples/Creality/CR-8/Configuration_adv.h | 2 ++ .../Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h | 2 ++ .../Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h | 2 ++ config/examples/Creality/Ender-2/Configuration_adv.h | 2 ++ .../BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 2 ++ .../Creality/Ender-3 Max Neo/CrealityV422/Configuration_adv.h | 2 ++ config/examples/Creality/Ender-3 Max/Configuration_adv.h | 2 ++ config/examples/Creality/Ender-3 Neo/Configuration_adv.h | 2 ++ .../Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h | 2 ++ .../Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h | 2 ++ .../Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h | 2 ++ .../Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 2 ++ .../BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration_adv.h | 2 ++ .../BigTreeTech SKR Mini E3 3.0/base/Configuration_adv.h | 2 ++ .../Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h | 2 ++ .../Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h | 2 ++ .../Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h | 2 ++ .../Ender-3 Pro/CrealityV427/BLTouch/Configuration_adv.h | 2 ++ .../Creality/Ender-3 Pro/CrealityV427/base/Configuration_adv.h | 2 ++ config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h | 2 ++ config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h | 2 ++ config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h | 2 ++ config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h | 2 ++ .../BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 2 ++ .../Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h | 2 ++ .../BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h | 2 ++ .../BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h | 2 ++ .../BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h | 2 ++ .../BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h | 2 ++ .../BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h | 2 ++ .../BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h | 2 ++ .../Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h | 2 ++ .../Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h | 2 ++ .../Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h | 2 ++ .../Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h | 2 ++ .../Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h | 2 ++ .../Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h | 2 ++ .../Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h | 2 ++ .../2-into-1 Hotend/Configuration_adv.h | 2 ++ .../Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h | 2 ++ .../Single Extruder/Configuration_adv.h | 2 ++ .../Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h | 2 ++ .../Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h | 2 ++ .../Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h | 2 ++ .../Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 2 ++ .../Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 2 ++ .../Creality/Ender-3/Creality free-runs/Configuration_adv.h | 2 ++ config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h | 2 ++ .../examples/Creality/Ender-3/CrealityV422/Configuration_adv.h | 2 ++ .../examples/Creality/Ender-3/CrealityV427/Configuration_adv.h | 2 ++ .../Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h | 2 ++ .../Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h | 2 ++ .../Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h | 2 ++ .../Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h | 2 ++ .../Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h | 2 ++ config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h | 2 ++ .../Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h | 2 ++ .../Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h | 2 ++ .../examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h | 2 ++ .../Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h | 2 ++ config/examples/Creality/Ender-4/Configuration_adv.h | 2 ++ .../Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h | 2 ++ .../Creality 4.2.2 (RELOADED UI)/Configuration_adv.h | 2 ++ .../Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h | 2 ++ .../Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h | 2 ++ .../Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h | 2 ++ .../Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h | 2 ++ .../Configuration_adv.h | 2 ++ .../Configuration_adv.h | 2 ++ .../Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h | 2 ++ .../Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h | 2 ++ .../Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h | 2 ++ config/examples/Creality/Ender-5 S1/Configuration_adv.h | 2 ++ .../BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h | 2 ++ .../Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h | 2 ++ .../Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h | 2 ++ .../Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 2 ++ .../Configuration_adv.h | 2 ++ .../Creality/Ender-5/Creality free-runs/Configuration_adv.h | 2 ++ config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h | 2 ++ .../Ender-5/CrealityV427 with BLTouch/Configuration_adv.h | 2 ++ .../examples/Creality/Ender-5/CrealityV427/Configuration_adv.h | 2 ++ config/examples/Creality/Ender-6/Configuration_adv.h | 2 ++ config/examples/Dagoma/Disco Ultimate/Configuration_adv.h | 2 ++ config/examples/Daycom/3DP-100/Configuration_adv.h | 2 ++ config/examples/E3D/BigBox Dual/Configuration_adv.h | 2 ++ .../examples/EXP3D/Imprimante multifonction/Configuration_adv.h | 2 ++ config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h | 2 ++ config/examples/Eazao/Zero/Configuration_adv.h | 2 ++ config/examples/Einstart-S/Configuration_adv.h | 2 ++ config/examples/Elegoo/Neptune 2/Configuration_adv.h | 2 ++ config/examples/Eryone/Thinker SE/Configuration_adv.h | 2 ++ config/examples/Eryone/Thinker V2/Configuration_adv.h | 2 ++ config/examples/FYSETC/AIO_II/Configuration_adv.h | 2 ++ config/examples/FYSETC/F6_13/Configuration_adv.h | 2 ++ config/examples/FYSETC/S6/Configuration_adv.h | 2 ++ config/examples/Felix/DUAL/Configuration_adv.h | 2 ++ config/examples/Felix/Single/Configuration_adv.h | 2 ++ config/examples/FlashForge/Creator 2X/Configuration_adv.h | 2 ++ config/examples/FlashForge/CreatorPro/Configuration_adv.h | 2 ++ .../examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h | 2 ++ config/examples/FlyingBear/P902/Configuration_adv.h | 2 ++ config/examples/FlyingBear/P905H/Configuration_adv.h | 2 ++ config/examples/FoamCutter/generic/Configuration_adv.h | 2 ++ config/examples/FoamCutter/rcKeith/Configuration_adv.h | 2 ++ config/examples/FolgerTech/FT-5 R2/Configuration_adv.h | 2 ++ config/examples/FolgerTech/i3-2020/Configuration_adv.h | 2 ++ config/examples/Formbot/Raptor/Configuration_adv.h | 2 ++ config/examples/Geeetech/A10/Configuration_adv.h | 2 ++ config/examples/Geeetech/A10D/Configuration_adv.h | 2 ++ config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h | 2 ++ config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h | 2 ++ config/examples/Geeetech/A10PRO/Configuration_adv.h | 2 ++ config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h | 2 ++ config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h | 2 ++ config/examples/Geeetech/A20/Configuration_adv.h | 2 ++ config/examples/Geeetech/A20M/Configuration_adv.h | 2 ++ config/examples/Geeetech/A20T/Configuration_adv.h | 2 ++ config/examples/Geeetech/A30/Configuration_adv.h | 2 ++ config/examples/Geeetech/A30M/Configuration_adv.h | 2 ++ config/examples/Geeetech/A30T/Configuration_adv.h | 2 ++ config/examples/Geeetech/D200/Configuration_adv.h | 2 ++ config/examples/Geeetech/Duplicator5/Configuration_adv.h | 2 ++ config/examples/Geeetech/E180/Configuration_adv.h | 2 ++ config/examples/Geeetech/GT2560/Configuration_adv.h | 2 ++ config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h | 2 ++ config/examples/Geeetech/M201/Configuration_adv.h | 2 ++ config/examples/Geeetech/MeCreator2/Configuration_adv.h | 2 ++ config/examples/Geeetech/Me_creator/Configuration_adv.h | 2 ++ config/examples/Geeetech/Me_ducer/Configuration_adv.h | 2 ++ config/examples/Geeetech/PI3A PRO/Configuration_adv.h | 2 ++ .../Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h | 2 ++ .../Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h | 2 ++ config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h | 2 ++ config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h | 2 ++ config/examples/HMS434/Configuration_adv.h | 2 ++ config/examples/Hictop/3DP-17/Configuration_adv.h | 2 ++ config/examples/Infitary/i3-M508/Configuration_adv.h | 2 ++ config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h | 2 ++ config/examples/JGAurora/A1/Configuration_adv.h | 2 ++ config/examples/JGAurora/A3/Configuration_adv.h | 2 ++ config/examples/JGAurora/A5/Configuration_adv.h | 2 ++ config/examples/JGAurora/A5S/Configuration_adv.h | 2 ++ config/examples/JGAurora/Magic/Configuration_adv.h | 2 ++ config/examples/Kingroon/KP3/Configuration_adv.h | 2 ++ config/examples/Kingroon/KP3S/Configuration_adv.h | 2 ++ config/examples/Kingroon/KP3S_Pro/Configuration_adv.h | 2 ++ config/examples/Kingroon/KP5L-DIY/Configuration_adv.h | 2 ++ config/examples/Labists/ET4/Configuration_adv.h | 2 ++ config/examples/Longer/LK5/Configuration_adv.h | 2 ++ config/examples/LulzBot/TAZ4/Configuration_adv.h | 2 ++ config/examples/MBot/Cube/Configuration_adv.h | 2 ++ config/examples/MZ3D/360/Configuration_adv.h | 2 ++ config/examples/MakerBot/Replicator Dual/Configuration_adv.h | 2 ++ config/examples/MakerBot/Replicator Single/Configuration_adv.h | 2 ++ config/examples/MakerFarm/Pegasus 12/Configuration_adv.h | 2 ++ config/examples/MakerGear/M2 Rev H/Configuration_adv.h | 2 ++ config/examples/MakerParts/Configuration_adv.h | 2 ++ config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h | 2 ++ config/examples/Malyan/M150/Configuration_adv.h | 2 ++ config/examples/Malyan/M180/Configuration_adv.h | 2 ++ config/examples/Malyan/M200/Configuration_adv.h | 2 ++ config/examples/Materia101/Configuration_adv.h | 2 ++ config/examples/Micromake/C1/basic/Configuration_adv.h | 2 ++ config/examples/Micromake/C1/enhanced/Configuration_adv.h | 2 ++ config/examples/Mks/Robin/Configuration_adv.h | 2 ++ config/examples/Mks/Robin_Lite3/Configuration_adv.h | 2 ++ config/examples/Mks/Robin_Pro/Configuration_adv.h | 2 ++ config/examples/Mks/Sbase/Configuration_adv.h | 2 ++ config/examples/Modix/Big60/Configuration_adv.h | 2 ++ config/examples/Nextion/Configuration_adv.h | 2 ++ config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h | 2 ++ config/examples/Opulo/Lumen_REV3/Configuration_adv.h | 2 ++ config/examples/Opulo/Lumen_REV4/Configuration_adv.h | 2 ++ config/examples/Opulo/Lumen_REV5/Configuration_adv.h | 2 ++ config/examples/Ortur 4/Configuration_adv.h | 2 ++ config/examples/Polargraph/Configuration_adv.h | 2 ++ config/examples/Printrbot/PrintrboardG2/Configuration_adv.h | 2 ++ config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h | 2 ++ .../examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h | 2 ++ config/examples/Prusa/MK3/Configuration_adv.h | 2 ++ .../examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h | 2 ++ config/examples/Qidi/Qidi 1/Configuration_adv.h | 2 ++ config/examples/Raiscube/A8r/Configuration_adv.h | 2 ++ config/examples/RapideLite/RL200/Configuration_adv.h | 2 ++ config/examples/Renkforce/RF100/Configuration_adv.h | 2 ++ config/examples/Renkforce/RF100XL/Configuration_adv.h | 2 ++ config/examples/Renkforce/RF100v2/Configuration_adv.h | 2 ++ config/examples/RepRapPro/Huxley/Configuration_adv.h | 2 ++ config/examples/RepRapWorld/Megatronics/Configuration_adv.h | 2 ++ config/examples/RepRapWorld/Minitronics11/Configuration_adv.h | 2 ++ .../examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h | 2 ++ config/examples/RigidBot/Configuration_adv.h | 2 ++ config/examples/Robo3D/R1+/Configuration_adv.h | 2 ++ config/examples/Rolohaun/Rook MK1/Configuration_adv.h | 2 ++ config/examples/SCARA/MP_SCARA/Configuration_adv.h | 2 ++ config/examples/SCARA/Morgan/Configuration_adv.h | 2 ++ config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h | 2 ++ config/examples/STM32/STM32F103RE/Configuration_adv.h | 2 ++ config/examples/Simax/Mi-M200/Configuration_adv.h | 2 ++ config/examples/Simulator/Configuration_adv.h | 2 ++ .../Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h | 2 ++ .../Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 2 ++ .../Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 2 ++ config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h | 2 ++ config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h | 2 ++ config/examples/Sovol/SV-02/Configuration_adv.h | 2 ++ config/examples/Sovol/SV-03/Configuration_adv.h | 2 ++ config/examples/Sovol/SV-05/Configuration_adv.h | 2 ++ config/examples/Sovol/SV-06 Plus/Configuration_adv.h | 2 ++ config/examples/Sovol/SV-06/Configuration_adv.h | 2 ++ config/examples/Sunlu/S8/Configuration_adv.h | 2 ++ config/examples/Sunlu/T3/Configuration_adv.h | 2 ++ config/examples/TPARA/AXEL_TPARA/Configuration_adv.h | 2 ++ config/examples/Tevo/Michelangelo/Configuration_adv.h | 2 ++ config/examples/Tevo/Nereus/Configuration_adv.h | 2 ++ .../examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h | 2 ++ .../examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h | 2 ++ config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h | 2 ++ config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h | 2 ++ .../examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h | 2 ++ config/examples/TinyBoy2/Configuration_adv.h | 2 ++ .../examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h | 2 ++ config/examples/Tronxy/X1/Configuration_adv.h | 2 ++ config/examples/Tronxy/X3A/Configuration_adv.h | 2 ++ .../Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h | 2 ++ .../Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h | 2 ++ config/examples/Tronxy/X5S/Configuration_adv.h | 2 ++ config/examples/Tronxy/X5SA Pro/Configuration_adv.h | 2 ++ config/examples/Tronxy/X5SA-2E/Configuration_adv.h | 2 ++ config/examples/Tronxy/X5SA/Configuration_adv.h | 2 ++ config/examples/Tronxy/XY100/Configuration_adv.h | 2 ++ config/examples/Tronxy/XY2-Pro/Configuration_adv.h | 2 ++ config/examples/Turnigy/Fabrikator/Configuration_adv.h | 2 ++ config/examples/Two Trees/BlueR Plus/Configuration_adv.h | 2 ++ config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h | 2 ++ config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h | 2 ++ config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h | 2 ++ config/examples/Two Trees/SP-5_V3/Configuration_adv.h | 2 ++ .../Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h | 2 ++ .../Sapphire Plus/Sapphire Plus V2/Configuration_adv.h | 2 ++ config/examples/Two Trees/Sapphire Pro/Configuration_adv.h | 2 ++ config/examples/UltiMachine/Archim1/Configuration_adv.h | 2 ++ config/examples/UltiMachine/Archim2/Configuration_adv.h | 2 ++ config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h | 2 ++ config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h | 2 ++ .../Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h | 2 ++ .../Ultimaker Original Plus (2.1.1)/Configuration_adv.h | 2 ++ .../Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h | 2 ++ config/examples/VORONDesign/Configuration_adv.h | 2 ++ config/examples/Velleman/K8200 Upgraded/Configuration_adv.h | 2 ++ config/examples/Velleman/K8200/Configuration_adv.h | 2 ++ config/examples/Velleman/K8400/Dual-head/Configuration_adv.h | 2 ++ config/examples/Velleman/K8400/Single-head/Configuration_adv.h | 2 ++ .../Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 2 ++ config/examples/WASP/PowerWASP/Configuration_adv.h | 2 ++ config/examples/Wanhao/Duplicator 4S/Configuration_adv.h | 2 ++ config/examples/Wanhao/Duplicator 6/Configuration_adv.h | 2 ++ config/examples/Wanhao/Duplicator 9/MK1/300/Configuration_adv.h | 2 ++ config/examples/Wanhao/Duplicator 9/MK1/400/Configuration_adv.h | 2 ++ config/examples/Wanhao/Duplicator 9/MK1/500/Configuration_adv.h | 2 ++ .../examples/Wanhao/Duplicator 9/MK1u2/300/Configuration_adv.h | 2 ++ .../examples/Wanhao/Duplicator 9/MK1u2/400/Configuration_adv.h | 2 ++ .../examples/Wanhao/Duplicator 9/MK1u2/500/Configuration_adv.h | 2 ++ config/examples/Wanhao/Duplicator 9/MK2/300/Configuration_adv.h | 2 ++ config/examples/Wanhao/Duplicator 9/MK2/400/Configuration_adv.h | 2 ++ config/examples/Wanhao/Duplicator 9/MK2/500/Configuration_adv.h | 2 ++ config/examples/Wanhao/Duplicator 9/MK3/300/Configuration_adv.h | 2 ++ config/examples/Wanhao/Duplicator 9/MK3/400/Configuration_adv.h | 2 ++ config/examples/Wanhao/Duplicator 9/MK3/500/Configuration_adv.h | 2 ++ config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h | 2 ++ config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h | 2 ++ config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h | 2 ++ config/examples/Weedo/Tina2/V2/Configuration_adv.h | 2 ++ config/examples/Weedo/Tina2/V3/Configuration_adv.h | 2 ++ config/examples/Weistek/wt150/Configuration_adv.h | 2 ++ config/examples/Zonestar/P802M/Configuration_adv.h | 2 ++ .../BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h | 2 ++ .../BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h | 2 ++ .../delta/Anycubic/Kossel Linear Plus/Configuration_adv.h | 2 ++ config/examples/delta/Anycubic/Kossel/Configuration_adv.h | 2 ++ config/examples/delta/Anycubic/Predator/Configuration_adv.h | 2 ++ config/examples/delta/Dreammaker/Overlord/Configuration_adv.h | 2 ++ .../examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h | 2 ++ config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h | 2 ++ config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h | 2 ++ config/examples/delta/FLSUN/QQ-S/Configuration_adv.h | 2 ++ config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h | 2 ++ config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h | 2 ++ config/examples/delta/FLSUN/kossel/Configuration_adv.h | 2 ++ config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h | 2 ++ config/examples/delta/Geeetech/G2/Configuration_adv.h | 2 ++ config/examples/delta/Geeetech/G2Pro/Configuration_adv.h | 2 ++ config/examples/delta/Geeetech/G2S/Configuration_adv.h | 2 ++ config/examples/delta/Geeetech/G2SPro/Configuration_adv.h | 2 ++ config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h | 2 ++ config/examples/delta/Hatchbox_Alpha/Configuration_adv.h | 2 ++ config/examples/delta/MKS/SBASE/Configuration_adv.h | 2 ++ config/examples/delta/Malyan M300/Configuration_adv.h | 2 ++ .../delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration_adv.h | 2 ++ .../examples/delta/Micromake-D1/RAMPS-1.4/Configuration_adv.h | 2 ++ config/examples/delta/Tevo Little Monster/Configuration_adv.h | 2 ++ config/examples/delta/Velleman/K8800/Configuration_adv.h | 2 ++ config/examples/delta/generic/Configuration_adv.h | 2 ++ config/examples/delta/kossel_clear/Configuration_adv.h | 2 ++ config/examples/delta/kossel_mini/Configuration_adv.h | 2 ++ config/examples/delta/kossel_pro/Configuration_adv.h | 2 ++ config/examples/delta/kossel_xl/Configuration_adv.h | 2 ++ config/examples/gCreate/gMax1.5+/Configuration_adv.h | 2 ++ .../linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h | 2 ++ .../linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h | 2 ++ config/examples/makibox/Configuration_adv.h | 2 ++ config/examples/tvrrug/Round2/Configuration_adv.h | 2 ++ 406 files changed, 812 insertions(+) diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index a958fb61b1..8cc2a46b78 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/3DMatik/XL/Configuration_adv.h b/config/examples/3DMatik/XL/Configuration_adv.h index 0f3384a0f1..76521d56c2 100644 --- a/config/examples/3DMatik/XL/Configuration_adv.h +++ b/config/examples/3DMatik/XL/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index ab613bda97..022593ca7b 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 28 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index e8805711b5..7c8f3bcb5c 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 2e941fb305..2cbf4a39b4 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -1804,6 +1804,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 820f75c587..8d83ba2a97 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/AliExpress/CL-260/Configuration_adv.h b/config/examples/AliExpress/CL-260/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/AliExpress/CL-260/Configuration_adv.h +++ b/config/examples/AliExpress/CL-260/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 584285ad15..0a7b84c1a2 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 32f4b2fe81..3af4388502 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 32f4b2fe81..3af4388502 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 2dcc799a46..965daf12d4 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index a43206625a..25583720d5 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 8c6c4db1c2..0bb9f6ee12 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index d9e7040fb8..02f2fa77d2 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 8141e1230b..c36c6fa048 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index bac622b6c4..633d464041 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index 31bc6adb7f..d9f7238c34 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index 4fd87c7756..78df8c93fb 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index 4fd87c7756..78df8c93fb 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 4fd87c7756..78df8c93fb 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 4fd87c7756..78df8c93fb 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 87a4c7b671..8131a14550 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 87a4c7b671..8131a14550 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 87a4c7b671..8131a14550 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index a950af3e11..d48949b78c 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) #define POWER_LOSS_PIN OUTAGETEST_PIN // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index e6adbc4501..1481e6e072 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 1ac973f2b5..50fbe5c6a4 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 92bf4b2030..a94cc53189 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/AnyCubic/Vyper/Configuration_adv.h b/config/examples/AnyCubic/Vyper/Configuration_adv.h index 63b5474f3b..718df832fd 100644 --- a/config/examples/AnyCubic/Vyper/Configuration_adv.h +++ b/config/examples/AnyCubic/Vyper/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h index a0dad70fac..2da725efd3 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h index f411bec9c3..f1a97d913f 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index bf4dd78f22..2f37c93afe 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 319704fb7a..0d6611710a 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -1800,6 +1800,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index c6e6e2ac5d..2f05addf4e 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index a7a67b17ae..827af2bdc8 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index 1148036cac..7a2572ef65 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index ac335a4788..90099e270b 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index f0a04b6f31..ebbf0558bf 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index 1148036cac..7a2572ef65 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index be5b5ed330..897d1842e0 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 8c22136e1a..6abec26b42 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h b/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h index bde89db417..bcb2908b10 100644 --- a/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 3c4fbdfbb1..293b2e70d5 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1792,6 +1792,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index 4ca18b4ae2..6e19006af3 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/BIQU/B1 SE/Configuration_adv.h b/config/examples/BIQU/B1 SE/Configuration_adv.h index a4e2fa8b2d..4cb8be539e 100644 --- a/config/examples/BIQU/B1 SE/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 1147b51841..d42f2965a3 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h b/config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h index 1774829700..3e7f60bc4b 100644 --- a/config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h +++ b/config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h @@ -1798,6 +1798,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/BIQU/BX/base/Configuration_adv.h b/config/examples/BIQU/BX/base/Configuration_adv.h index a8da33c1f4..da627e0b0b 100644 --- a/config/examples/BIQU/BX/base/Configuration_adv.h +++ b/config/examples/BIQU/BX/base/Configuration_adv.h @@ -1798,6 +1798,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/BIQU/Hurakan/Configuration_adv.h b/config/examples/BIQU/Hurakan/Configuration_adv.h index 4f3d6a27b0..b21ef4331f 100644 --- a/config/examples/BIQU/Hurakan/Configuration_adv.h +++ b/config/examples/BIQU/Hurakan/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/BIQU/Thunder Standard/Configuration_adv.h b/config/examples/BIQU/Thunder Standard/Configuration_adv.h index c2de79ad18..72ac9771d5 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration_adv.h +++ b/config/examples/BIQU/Thunder Standard/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 28dc8529e3..b5bcdc1935 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 1868a1a5db..4e3e6fce7a 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1803,6 +1803,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 28dc8529e3..b5bcdc1935 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/CNC/miniRambo/Configuration_adv.h b/config/examples/CNC/miniRambo/Configuration_adv.h index 38a99160b8..3c1ff4c5f8 100644 --- a/config/examples/CNC/miniRambo/Configuration_adv.h +++ b/config/examples/CNC/miniRambo/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index 04dce22e52..45522ecedc 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index df45d980c2..1800d75adf 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 4545849bea..e98f834fb7 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Copymaster3D/300/Configuration_adv.h b/config/examples/Copymaster3D/300/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Copymaster3D/300/Configuration_adv.h +++ b/config/examples/Copymaster3D/300/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Copymaster3D/400/Configuration_adv.h b/config/examples/Copymaster3D/400/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Copymaster3D/400/Configuration_adv.h +++ b/config/examples/Copymaster3D/400/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Copymaster3D/500/Configuration_adv.h b/config/examples/Copymaster3D/500/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Copymaster3D/500/Configuration_adv.h +++ b/config/examples/Copymaster3D/500/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10 Max/Configuration_adv.h b/config/examples/Creality/CR-10 Max/Configuration_adv.h index e2c9f69eb9..1065b2efe6 100644 --- a/config/examples/Creality/CR-10 Max/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Max/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index e9efae5bff..1d9c405eea 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 110cbaf963..267b1856ed 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index bf703f0ba4..3dcd8077e7 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 5ad3634927..1b9fdcf39b 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -1794,6 +1794,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index cce598c2f5..3b9846f8f1 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index bebc2d80f9..3026b2f8ef 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index 40d8966540..6c22ac7d5b 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index cce598c2f5..3b9846f8f1 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h index c053730bdb..ce243f0bda 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h index 1f89e3a014..255bcaa99f 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 296b258ba8..5c77f6d22c 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index 853bacd933..1222d8204e 100644 --- a/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -1797,6 +1797,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10 V3/Stock/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Stock/Configuration_adv.h index ffc558bb9d..b5e7cfedb3 100644 --- a/config/examples/Creality/CR-10 V3/Stock/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Stock/Configuration_adv.h @@ -1797,6 +1797,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a8628362a7..cac66c8a80 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 142fe64327..4c9e5fabb9 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index a78014b7ed..700f3aea62 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10S Pro/Configuration_adv.h b/config/examples/Creality/CR-10S Pro/Configuration_adv.h index 2279af5908..84cba31137 100644 --- a/config/examples/Creality/CR-10S Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-10S Pro/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index d45632bd25..ea99403fa0 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h index 54325958a5..7386e60360 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a8628362a7..cac66c8a80 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index cabdc58652..746be659ae 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index 2fa5dcfa4e..7f823f3d95 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h index c0546f2eec..7a7619463f 100644 --- a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index c1e59ad254..f6eb335390 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 03360303b3..8616a0b88c 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h index c178a0b262..71dee80745 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-20/Stock/Configuration_adv.h b/config/examples/Creality/CR-20/Stock/Configuration_adv.h index c178a0b262..71dee80745 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Stock/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index f2ccd8ae14..1c3f353ea6 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 22297b0824..23cc435179 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 70d0b4517e..e520777e93 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h index 886e3bb053..480d042b3d 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index e869fd26c3..d26d56ba16 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 418cb65b09..624a2b6942 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 1c90985c28..206267ee10 100644 --- a/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration_adv.h index b729028a94..63dca97154 100644 --- a/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 08a44b8854..8beea0f823 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h index ebe070fe2e..6c34d7db07 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 0b2827ed68..20400d5f2b 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 42f70962e7..f42c2cb7fc 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 42f70962e7..f42c2cb7fc 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a45575bb7a..1883ba463a 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration_adv.h index 3f13b0aae0..697f3664aa 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration_adv.h index bab8c4c645..b23e40a545 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h index 639a6f437d..8d16b35be3 100644 --- a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 76f9ba1a7d..b428240353 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index db505d561a..e117ca0b47 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration_adv.h index db6f75cd0b..91655997d1 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration_adv.h index 3711eb5e61..0da6e8ea09 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h index db75ac0f16..bd8cc9887c 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h index db75ac0f16..bd8cc9887c 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h index 263b91c2e2..70ae4e75c4 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h index 55e2baff12..203ced9875 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index c47ee92146..ba095b0067 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h index be80959bbb..085bb9a3fc 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index 57b527cc6d..a875202b6b 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index bd36dc3968..6e71d59a0d 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h index b6a5052571..5feeee57f8 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h index 690e42b09e..89489b7cbc 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h index 7b25b49325..0bfac28cfe 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h index f4f959e3a6..6528ff0113 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 59eee6b7c7..91689b1e6e 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index 6f2e13daea..ce8104cfad 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h index 23c63cc69b..3e19739175 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h index 5019c1cb07..42802fa7c8 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index c49869e6be..f029414b23 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) #define POWER_LOSS_PIN -1 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h index 8f40891f5b..f8dc14b746 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index 419abb5122..b509ea5836 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 0df3ea0aed..747417719c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index e416a19d49..ab06347c9e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 0df3ea0aed..747417719c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 78b91a3d39..7c0e2868fc 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 08ccda92a1..7b707ff7e7 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 08ccda92a1..7b707ff7e7 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index dd10635b07..ce4e47397c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 163bcbabfc..e8ee78a368 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h index 639a6f437d..8d16b35be3 100644 --- a/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 76f9ba1a7d..b428240353 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 53a1ad69dd..2f09e2f9cb 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 3711eb5e61..0da6e8ea09 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 5f15d240fa..2eee2b4526 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 5f15d240fa..2eee2b4526 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index 82fea214c3..751e075169 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 5f15d240fa..2eee2b4526 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 5f15d240fa..2eee2b4526 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 0c41b44dc8..51add1a1f4 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -1794,6 +1794,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index 2a4dc4e71b..765f789594 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index 708ecd3c01..0cab073f4f 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index b075460599..c255581540 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index 0302fd9244..776422e55b 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 0c9d33e995..69f69c28e2 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h index cef82cfcc2..849d728d6a 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration_adv.h index 9e2d76bd6a..bd1361441f 100644 --- a/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h index e64742a418..20b94b41cf 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h index 546a37c5c6..0b7e1151c4 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 9767b7b116..e9b4533fc5 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 9545808d76..9356e76a73 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index 4daeb1072c..7f21c6e2c9 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h index 3be107940d..1e3bc1f78e 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 3eacc0e552..4f8164c3f5 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index b6a83310fe..409a1256b3 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index f2e42925f7..9422036402 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5 S1/Configuration_adv.h b/config/examples/Creality/Ender-5 S1/Configuration_adv.h index c2a04d73dc..03ce834143 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 S1/Configuration_adv.h @@ -1798,6 +1798,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 9767b7b116..e9b4533fc5 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 631aabf6b2..e637da736a 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index e425557f0d..2d6ab7bc15 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index fa9a38e58b..bcc68a222e 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h index 768cd167a6..75fc15580d 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h index c41c717cfc..d43fe14340 100644 --- a/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 85ad56014a..ab9dc5fef1 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h index 7f61adc060..f6350081d2 100644 --- a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 9faad2194a..65a85e109c 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index c480a40e0d..d95eaa4487 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index f638ef88a9..ee0ee601f0 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 68055b628d..cf8196329e 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/E3D/BigBox Dual/Configuration_adv.h b/config/examples/E3D/BigBox Dual/Configuration_adv.h index ed1589c27d..763a94755a 100644 --- a/config/examples/E3D/BigBox Dual/Configuration_adv.h +++ b/config/examples/E3D/BigBox Dual/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 4d0d065093..9bbd2960e6 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index 353701bc13..8c85f39645 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Eazao/Zero/Configuration_adv.h b/config/examples/Eazao/Zero/Configuration_adv.h index beb68f91ab..22d095e215 100644 --- a/config/examples/Eazao/Zero/Configuration_adv.h +++ b/config/examples/Eazao/Zero/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 6708a1a360..b262193d9d 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index 088ca52ef5..3538a821d3 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index 33bc6c62c9..126bf6bd11 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index 63f5e99b81..494ddfd4c3 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 27cf2155ec..ce781b7b9a 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 83a323685a..3069449833 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index c90a02e78c..eb593a289b 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 470f1f7e43..a3fe7555e9 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 470f1f7e43..a3fe7555e9 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 410c898ced..c4641d5769 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index a688d35242..52883abadc 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -1797,6 +1797,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h b/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h index f2638e0e03..d94deee5b8 100644 --- a/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h +++ b/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h @@ -1793,6 +1793,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index f6a278e948..bfac14c641 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index c8c7254f69..99964bf2d3 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -1798,6 +1798,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/FoamCutter/generic/Configuration_adv.h b/config/examples/FoamCutter/generic/Configuration_adv.h index 117c418ddb..5d728932f3 100644 --- a/config/examples/FoamCutter/generic/Configuration_adv.h +++ b/config/examples/FoamCutter/generic/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/FoamCutter/rcKeith/Configuration_adv.h b/config/examples/FoamCutter/rcKeith/Configuration_adv.h index 117c418ddb..5d728932f3 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration_adv.h +++ b/config/examples/FoamCutter/rcKeith/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h index d9fd643939..797b8b1435 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index f7c58d9db8..1aa6794660 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 0dafca2155..e99f85a74e 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 9c271bbb6a..578271d5ed 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 156ffb7aef..983fe94b4e 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index f55e31b4e5..735a665302 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) #define POWER_LOSS_PIN 69 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index f55e31b4e5..735a665302 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) #define POWER_LOSS_PIN 69 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index 9c271bbb6a..578271d5ed 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index f55e31b4e5..735a665302 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) #define POWER_LOSS_PIN 69 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index f55e31b4e5..735a665302 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) #define POWER_LOSS_PIN 69 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 927a6583d6..5dcccb28d4 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) #define POWER_LOSS_PIN 69 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 927a6583d6..5dcccb28d4 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) #define POWER_LOSS_PIN 69 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 927a6583d6..5dcccb28d4 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) #define POWER_LOSS_PIN 69 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 626b29668a..9c55e45b84 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index 626b29668a..9c55e45b84 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index 626b29668a..9c55e45b84 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 819b71a9aa..c0bb94d3d2 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index c90a02e78c..eb593a289b 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 626b29668a..9c55e45b84 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/GT2560/Configuration_adv.h b/config/examples/Geeetech/GT2560/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Geeetech/GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/GT2560/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 819b71a9aa..c0bb94d3d2 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index e916dff64f..09e491b0e7 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index c90a02e78c..eb593a289b 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index d5bf4025a3..c7233e8fed 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 40e0218279..5ccdadc09d 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 9c271bbb6a..578271d5ed 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 9c271bbb6a..578271d5ed 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 658f53f9bb..81564780cb 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Hictop/3DP-17/Configuration_adv.h b/config/examples/Hictop/3DP-17/Configuration_adv.h index 53d0fabbf4..f9e38126c7 100644 --- a/config/examples/Hictop/3DP-17/Configuration_adv.h +++ b/config/examples/Hictop/3DP-17/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 282b57d46e..7606399d10 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 21fe1e85f4..571870e34d 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 61cc5e17c1..3bba4b28d1 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -1801,6 +1801,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/JGAurora/A3/Configuration_adv.h b/config/examples/JGAurora/A3/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/JGAurora/A3/Configuration_adv.h +++ b/config/examples/JGAurora/A3/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index a55fd68522..ac7c5d2147 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index b01413fec2..88992bb629 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -1801,6 +1801,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index e060ae6357..35d7591efa 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index b60622c7a9..c9553f790a 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Kingroon/KP3S/Configuration_adv.h b/config/examples/Kingroon/KP3S/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Kingroon/KP3S/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h index 9a9901e5ab..d14784fcbc 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h b/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h index 4dab6d2b0c..810bf68180 100644 --- a/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h +++ b/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index 4fd87c7756..78df8c93fb 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Longer/LK5/Configuration_adv.h b/config/examples/Longer/LK5/Configuration_adv.h index 6259e8d727..7d7d7f4ebd 100644 --- a/config/examples/Longer/LK5/Configuration_adv.h +++ b/config/examples/Longer/LK5/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index 5983213a2a..c412e6b0ce 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 2d0fc43e8d..af57e38304 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/MZ3D/360/Configuration_adv.h b/config/examples/MZ3D/360/Configuration_adv.h index f304c10370..8e8cf02ee2 100644 --- a/config/examples/MZ3D/360/Configuration_adv.h +++ b/config/examples/MZ3D/360/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/MakerBot/Replicator Dual/Configuration_adv.h b/config/examples/MakerBot/Replicator Dual/Configuration_adv.h index b37401c0a8..3c19994a11 100644 --- a/config/examples/MakerBot/Replicator Dual/Configuration_adv.h +++ b/config/examples/MakerBot/Replicator Dual/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/MakerBot/Replicator Single/Configuration_adv.h b/config/examples/MakerBot/Replicator Single/Configuration_adv.h index 460577f8a1..216b5c4b67 100644 --- a/config/examples/MakerBot/Replicator Single/Configuration_adv.h +++ b/config/examples/MakerBot/Replicator Single/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 349964b964..a439f3bb8b 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/MakerGear/M2 Rev H/Configuration_adv.h b/config/examples/MakerGear/M2 Rev H/Configuration_adv.h index 8d61f24674..cbffa6d4ce 100644 --- a/config/examples/MakerGear/M2 Rev H/Configuration_adv.h +++ b/config/examples/MakerGear/M2 Rev H/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 3d457c5e59..6992467b30 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h index c617d9e976..927184a44d 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index e5fe85b1a6..7271811e0f 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Malyan/M180/Configuration_adv.h b/config/examples/Malyan/M180/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Malyan/M180/Configuration_adv.h +++ b/config/examples/Malyan/M180/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 31a6841209..79ae7dc503 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -1797,6 +1797,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Materia101/Configuration_adv.h b/config/examples/Materia101/Configuration_adv.h index 85a9275854..52470b4a62 100644 --- a/config/examples/Materia101/Configuration_adv.h +++ b/config/examples/Materia101/Configuration_adv.h @@ -1793,6 +1793,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Micromake/C1/basic/Configuration_adv.h b/config/examples/Micromake/C1/basic/Configuration_adv.h index 41f925e3cb..56357b9f01 100644 --- a/config/examples/Micromake/C1/basic/Configuration_adv.h +++ b/config/examples/Micromake/C1/basic/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 082fdafaf0..e5336f98cb 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Mks/Robin_Lite3/Configuration_adv.h b/config/examples/Mks/Robin_Lite3/Configuration_adv.h index 9ec5fe9351..c655805953 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration_adv.h +++ b/config/examples/Mks/Robin_Lite3/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Mks/Robin_Pro/Configuration_adv.h b/config/examples/Mks/Robin_Pro/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Mks/Robin_Pro/Configuration_adv.h +++ b/config/examples/Mks/Robin_Pro/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 5435d0ea3f..046a4239b7 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index fffa9fd44b..5c7c0396e2 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index 5ed8e1b668..16924f1ac2 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h index d6e42e6b77..006bc9a8d5 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h index 048270fb37..f11c3e7fb7 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h index 9501662ed0..671418ef26 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h @@ -1794,6 +1794,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Opulo/Lumen_REV5/Configuration_adv.h b/config/examples/Opulo/Lumen_REV5/Configuration_adv.h index 2c3a89baee..aea779f059 100644 --- a/config/examples/Opulo/Lumen_REV5/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV5/Configuration_adv.h @@ -1794,6 +1794,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 0b70a528f2..7ce827e9f2 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) #define POWER_LOSS_PIN 64 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index b2ad530e1d..8948654883 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h b/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h index bc93849096..aed838236f 100644 --- a/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h +++ b/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index b4b6d39126..9431122b6d 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index b18ffdbfc7..2f9f82b5ba 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 40103b0d53..e1c4f49199 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 2dcc799a46..965daf12d4 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index c90a02e78c..eb593a289b 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index fe19d53c9b..db557ee8e0 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index fe19d53c9b..db557ee8e0 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index fe19d53c9b..db557ee8e0 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/RepRapPro/Huxley/Configuration_adv.h b/config/examples/RepRapPro/Huxley/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/RepRapPro/Huxley/Configuration_adv.h +++ b/config/examples/RepRapPro/Huxley/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h index 7596509d30..17e2b31358 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h index c0546f2eec..7a7619463f 100644 --- a/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h index 3bcc00179e..a125254cd1 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 24479fcf45..c142292954 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Robo3D/R1+/Configuration_adv.h b/config/examples/Robo3D/R1+/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Robo3D/R1+/Configuration_adv.h +++ b/config/examples/Robo3D/R1+/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Rolohaun/Rook MK1/Configuration_adv.h b/config/examples/Rolohaun/Rook MK1/Configuration_adv.h index 4aa0bf8c2c..f348566126 100644 --- a/config/examples/Rolohaun/Rook MK1/Configuration_adv.h +++ b/config/examples/Rolohaun/Rook MK1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index e8f1109c67..2219fd2c13 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index b96e2f99cb..3cef4b25d4 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 8234138595..8918207795 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/STM32/STM32F103RE/Configuration_adv.h b/config/examples/STM32/STM32F103RE/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/STM32/STM32F103RE/Configuration_adv.h +++ b/config/examples/STM32/STM32F103RE/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Simax/Mi-M200/Configuration_adv.h b/config/examples/Simax/Mi-M200/Configuration_adv.h index 67d17b8e25..c7663749b5 100644 --- a/config/examples/Simax/Mi-M200/Configuration_adv.h +++ b/config/examples/Simax/Mi-M200/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index 69beca6cf7..c600551bb0 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index da854d8294..0ed9b4dcef 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index f766c63764..b25dcffe95 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index fd3b39a74a..a808858237 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index a70903f1cb..a15ab8e39e 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -1797,6 +1797,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index f8f910ad91..6cad7406a5 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -1797,6 +1797,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Sovol/SV-02/Configuration_adv.h b/config/examples/Sovol/SV-02/Configuration_adv.h index b9cdc484ea..adfa57bb96 100644 --- a/config/examples/Sovol/SV-02/Configuration_adv.h +++ b/config/examples/Sovol/SV-02/Configuration_adv.h @@ -1797,6 +1797,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Sovol/SV-03/Configuration_adv.h b/config/examples/Sovol/SV-03/Configuration_adv.h index 27e4433b95..33e7a20a3f 100644 --- a/config/examples/Sovol/SV-03/Configuration_adv.h +++ b/config/examples/Sovol/SV-03/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Sovol/SV-05/Configuration_adv.h b/config/examples/Sovol/SV-05/Configuration_adv.h index fc75076c39..1b443bdd08 100644 --- a/config/examples/Sovol/SV-05/Configuration_adv.h +++ b/config/examples/Sovol/SV-05/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Sovol/SV-06 Plus/Configuration_adv.h b/config/examples/Sovol/SV-06 Plus/Configuration_adv.h index 444db83371..cfa824d063 100644 --- a/config/examples/Sovol/SV-06 Plus/Configuration_adv.h +++ b/config/examples/Sovol/SV-06 Plus/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) #define POWER_LOSS_PIN PC13 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Sovol/SV-06/Configuration_adv.h b/config/examples/Sovol/SV-06/Configuration_adv.h index 2b0d2c8fc8..5959210555 100644 --- a/config/examples/Sovol/SV-06/Configuration_adv.h +++ b/config/examples/Sovol/SV-06/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) #define POWER_LOSS_PIN PC13 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index 2733f511fc..1fed124602 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Sunlu/T3/Configuration_adv.h b/config/examples/Sunlu/T3/Configuration_adv.h index 4b550cda96..b794266b3a 100644 --- a/config/examples/Sunlu/T3/Configuration_adv.h +++ b/config/examples/Sunlu/T3/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index b5290a8001..f8854d38ca 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -1797,6 +1797,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 5539f3b383..b777a53368 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index ae4d92b0f3..d5abfe132c 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h index 8cb489e331..a343168cb5 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h index ade4a240ad..a45b8db691 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 32430eecfc..c7ba45a95f 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h index 32430eecfc..c7ba45a95f 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h index f7f9110497..00bc1f2478 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index da7c100179..029504d390 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h index c66bf990fc..da3d31c105 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tronxy/X1/Configuration_adv.h b/config/examples/Tronxy/X1/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Tronxy/X1/Configuration_adv.h +++ b/config/examples/Tronxy/X1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 78937113b0..7966544d74 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h index 19b1007746..0106cef9d1 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h index ef1bf6a4df..2de13a3f1d 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tronxy/X5S/Configuration_adv.h b/config/examples/Tronxy/X5S/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Tronxy/X5S/Configuration_adv.h +++ b/config/examples/Tronxy/X5S/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tronxy/X5SA Pro/Configuration_adv.h b/config/examples/Tronxy/X5SA Pro/Configuration_adv.h index 8c6a8c9106..fc707833b3 100644 --- a/config/examples/Tronxy/X5SA Pro/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA Pro/Configuration_adv.h @@ -1809,6 +1809,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index 5be61c6152..54e4a575a9 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 820cd48e57..bc0ba293d2 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tronxy/XY100/Configuration_adv.h b/config/examples/Tronxy/XY100/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Tronxy/XY100/Configuration_adv.h +++ b/config/examples/Tronxy/XY100/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h index d32fd34aa7..ac4aa316af 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Turnigy/Fabrikator/Configuration_adv.h b/config/examples/Turnigy/Fabrikator/Configuration_adv.h index 4c315e8185..79e3bbad05 100644 --- a/config/examples/Turnigy/Fabrikator/Configuration_adv.h +++ b/config/examples/Turnigy/Fabrikator/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index b4bcd68938..d032f59371 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT true // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 3ddd4e2334..77dd94d1c1 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 3ddd4e2334..77dd94d1c1 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 3ddd4e2334..77dd94d1c1 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Two Trees/SP-5_V3/Configuration_adv.h b/config/examples/Two Trees/SP-5_V3/Configuration_adv.h index 4c6a872249..b2f69d27c7 100644 --- a/config/examples/Two Trees/SP-5_V3/Configuration_adv.h +++ b/config/examples/Two Trees/SP-5_V3/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h index d39f02e9c3..e3e91ce34a 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h @@ -1801,6 +1801,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 4f62ee3bd9..2dab4b8cc2 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -1801,6 +1801,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 4589617ebe..33b6cedade 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index bdc2bbc5a1..50406e134a 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 4ab8edf22c..d6b697bb89 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h index a392967bd1..368d9bda80 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index eed07549c8..82ca709c8c 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index fa629fc6fe..2129ac43fc 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index 76869416f7..fbe7caf81e 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h index aa7fe58998..1480b9a208 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h @@ -1793,6 +1793,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 8fdfd69a05..725850493d 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h index 5682b5cc50..f8296f1728 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h @@ -1808,6 +1808,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 8f6efe6dec..428e20c9a3 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -1808,6 +1808,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index d2b83a2e6c..24c4dc10d0 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index d2b83a2e6c..24c4dc10d0 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index bddee26ff7..5b703fead5 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index b4dd97aa11..028d1f5357 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) #define POWER_LOSS_PIN 65 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 4def20b44e..f262c6db4c 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index c09276e1ae..6c98f458c5 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1797,6 +1797,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration_adv.h index 79eb1098b5..abca0b0f20 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration_adv.h index 79eb1098b5..abca0b0f20 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration_adv.h index d40bd63971..ae609e863f 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration_adv.h index d40bd63971..ae609e863f 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration_adv.h index d40bd63971..ae609e863f 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration_adv.h index d40bd63971..ae609e863f 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration_adv.h index d40bd63971..ae609e863f 100644 --- a/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration_adv.h index d40bd63971..ae609e863f 100644 --- a/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration_adv.h index d40bd63971..ae609e863f 100644 --- a/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration_adv.h index d40bd63971..ae609e863f 100644 --- a/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration_adv.h index d40bd63971..ae609e863f 100644 --- a/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration_adv.h index d40bd63971..ae609e863f 100644 --- a/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index b7829c9e49..b037466ecc 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 6f972f697b..847bf1f2fa 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index bda0726017..c85520b83c 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index bda0726017..c85520b83c 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -1795,6 +1795,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 1de2dda5f8..97745d93c7 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 8e11c17ea6..3823c49362 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index e237b7d2d7..acd71b68a7 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 21c6b20a71..a6bcf44841 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index cb990758e6..2aba2faf60 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 33e28149fe..96aec5e2ef 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 59e1b5d865..a56cd4bc57 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -1798,6 +1798,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 5cc188f667..c56061db65 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 5cc188f667..c56061db65 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -1796,6 +1796,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index 1f4210e28b..47a82e4b3d 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 3542f1d7ac..385735c60d 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index fdd88e6d3f..9bff16e217 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -1797,6 +1797,8 @@ #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) #define POWER_LOSS_PIN -1 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index f0b1321a5b..6addd49249 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index f0b1321a5b..6addd49249 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 011d665bf9..4943e5f8d2 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index ac100b95b2..ddadfbc367 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index ac100b95b2..ddadfbc367 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index ac100b95b2..ddadfbc367 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index ac100b95b2..ddadfbc367 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index f894e83594..e336239eaf 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index ec47e11ae5..2569c62ba1 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 67ad4099dd..92a07ea3f9 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 0651024c4d..5b534ccb40 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration_adv.h b/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration_adv.h index 94c02334ab..b8d0475476 100644 --- a/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration_adv.h +++ b/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration_adv.h @@ -1797,6 +1797,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration_adv.h b/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration_adv.h index 40db93488d..98f873f197 100644 --- a/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration_adv.h +++ b/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index a9a8062ff8..fbdb0fc141 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/Velleman/K8800/Configuration_adv.h b/config/examples/delta/Velleman/K8800/Configuration_adv.h index 59206ee98e..fdcde92f11 100644 --- a/config/examples/delta/Velleman/K8800/Configuration_adv.h +++ b/config/examples/delta/Velleman/K8800/Configuration_adv.h @@ -1797,6 +1797,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 011d665bf9..4943e5f8d2 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index b987a978d5..b82ff926da 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/kossel_pro/Configuration_adv.h b/config/examples/delta/kossel_pro/Configuration_adv.h index dc640896a8..085faf42e7 100644 --- a/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/config/examples/delta/kossel_pro/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 257dbe059d..00fb939913 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1796,6 +1796,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 16145c965f..777769af0a 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h index 963f57f633..3e79182272 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index 80c69ca1ed..ee6812ae92 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index eecfb40225..1ac5a35ed2 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default. diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 0bc2598430..c6eb9a5da3 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1795,6 +1795,8 @@ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + //#define PLR_HEAT_BED_ON_REBOOT // Heat up bed immediately on reboot to mitigate object detaching/warping. + //#define PLR_HEAT_BED_EXTRA 0 // (°C) Relative increase of bed temperature for better adhesion (limited by max temp). //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable) //#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default.