diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 3dbc155c0d..41b5be0b42 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -1685,7 +1685,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/3DMatik/XL/Configuration.h b/config/examples/3DMatik/XL/Configuration.h index 970a43ab76..ac59060e53 100644 --- a/config/examples/3DMatik/XL/Configuration.h +++ b/config/examples/3DMatik/XL/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 2abc3830bf..dd874f9779 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index dd7cc821ca..eb240a4e1f 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index a149edb0c9..01f7f48322 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -1752,7 +1752,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index a5887d7f4d..05945b3ed4 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -1753,7 +1753,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 241dc118f9..e9d2cc2fc1 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index cc7522ccac..2e65a1d9e5 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index c26f838ec5..5f3e384d63 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. //#define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index f677b98544..f40d70ce52 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. //#define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 7dbbb98466..805f1dfbe5 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -1713,7 +1713,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index ca445d7d82..b46265397b 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -1686,7 +1686,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 71261daa0e..cf6b373023 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -1685,7 +1685,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index 60cd45b685..8749f8e3bd 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index 4d50a237ee..55299aee2e 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index b0a1215cd7..7496a5fb86 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -1685,7 +1685,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index 420b043625..4fd83a599c 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -1685,7 +1685,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index 798180368b..45242ffc74 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -1689,7 +1689,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 25 // X and Y axis travel speed between probes. diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index 399f9b716b..2100c240ad 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -1689,7 +1689,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 25 // X and Y axis travel speed between probes. diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index e4f657d777..d8d4e6f866 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -1689,7 +1689,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 25 // X and Y axis travel speed between probes. diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index b5173d61d5..51c18479aa 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -1689,7 +1689,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 25 // X and Y axis travel speed between probes. diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index a9309c0450..79a9a431ea 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index 6a497aafe2..1d0993d56c 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index 1cee5dca23..0da786237a 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index 06d7fb7364..d7c3a8a509 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -1687,7 +1687,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index bf46f972d2..e851f634df 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index 937e5383ff..1f4df7bfc1 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index f18fdf989c..8c241626be 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/AnyCubic/Vyper/Configuration.h b/config/examples/AnyCubic/Vyper/Configuration.h index c7dcea6a07..38006314fc 100644 --- a/config/examples/AnyCubic/Vyper/Configuration.h +++ b/config/examples/AnyCubic/Vyper/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h index 43eb2512ce..8f63c5cf3f 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h @@ -1732,7 +1732,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h index 68413d2ec4..aa0bc723ec 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h @@ -1694,7 +1694,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 02a797a63d..3dc893c551 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index ede498c3a6..70f183f954 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Artillery/Genius Pro/Configuration.h b/config/examples/Artillery/Genius Pro/Configuration.h index cea8d81526..b03049bea6 100644 --- a/config/examples/Artillery/Genius Pro/Configuration.h +++ b/config/examples/Artillery/Genius Pro/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration.h b/config/examples/Artillery/Genius/BLTouch/Configuration.h index f2f9e2fc68..cba9e15a5e 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Artillery/Genius/V1/Configuration.h b/config/examples/Artillery/Genius/V1/Configuration.h index dbcb628435..1c079ebf1a 100644 --- a/config/examples/Artillery/Genius/V1/Configuration.h +++ b/config/examples/Artillery/Genius/V1/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Artillery/Hornet/Configuration.h b/config/examples/Artillery/Hornet/Configuration.h index a1215912f5..0a80bf167a 100644 --- a/config/examples/Artillery/Hornet/Configuration.h +++ b/config/examples/Artillery/Hornet/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h index f011547ecc..e2cecfc715 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h @@ -1699,7 +1699,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h index faf9748c73..c2b239a578 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Artillery/Sidewinder X2/Configuration.h b/config/examples/Artillery/Sidewinder X2/Configuration.h index 6c27595ecb..f956da9177 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index ee7ea8ed71..04803a884d 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 27bb7f2039..b0365fcf12 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/BIBO/TouchX/default - BLTouch/Configuration.h b/config/examples/BIBO/TouchX/default - BLTouch/Configuration.h index 1f604c62b9..4334724872 100644 --- a/config/examples/BIBO/TouchX/default - BLTouch/Configuration.h +++ b/config/examples/BIBO/TouchX/default - BLTouch/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index fd2ff5ed50..1c89c33294 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/BIQU/B1 SE Plus/Configuration.h b/config/examples/BIQU/B1 SE Plus/Configuration.h index d49c581450..c1c0a50115 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration.h @@ -1681,7 +1681,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/BIQU/B1 SE/Configuration.h b/config/examples/BIQU/B1 SE/Configuration.h index c8a5cd87a5..41a60844dc 100644 --- a/config/examples/BIQU/B1 SE/Configuration.h +++ b/config/examples/BIQU/B1 SE/Configuration.h @@ -1681,7 +1681,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h index 3501631355..8b6b85adaa 100644 --- a/config/examples/BIQU/B1/Configuration.h +++ b/config/examples/BIQU/B1/Configuration.h @@ -1692,7 +1692,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/BIQU/BX/all-metal-hotend/Configuration.h b/config/examples/BIQU/BX/all-metal-hotend/Configuration.h index eb9a96051d..103afaf223 100644 --- a/config/examples/BIQU/BX/all-metal-hotend/Configuration.h +++ b/config/examples/BIQU/BX/all-metal-hotend/Configuration.h @@ -1705,7 +1705,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 15 // X and Y axis travel speed between probes. diff --git a/config/examples/BIQU/BX/base/Configuration.h b/config/examples/BIQU/BX/base/Configuration.h index ae7d85f979..b2bbff57d7 100644 --- a/config/examples/BIQU/BX/base/Configuration.h +++ b/config/examples/BIQU/BX/base/Configuration.h @@ -1705,7 +1705,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 15 // X and Y axis travel speed between probes. diff --git a/config/examples/BIQU/Hurakan/Configuration.h b/config/examples/BIQU/Hurakan/Configuration.h index d320b861d0..e336f5c071 100644 --- a/config/examples/BIQU/Hurakan/Configuration.h +++ b/config/examples/BIQU/Hurakan/Configuration.h @@ -1686,7 +1686,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 5 // X and Y axis travel speed between probes. diff --git a/config/examples/BIQU/Thunder Standard/Configuration.h b/config/examples/BIQU/Thunder Standard/Configuration.h index c3fbed4052..4ff7da8bbc 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration.h +++ b/config/examples/BIQU/Thunder Standard/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 3756552dfc..0f48495702 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 60f4bebc2d..c3c4f069d6 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -1697,7 +1697,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 69f0f9dbe0..32063436cf 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/CNC/miniRambo/Configuration.h b/config/examples/CNC/miniRambo/Configuration.h index 5f683b9788..18284e3e6c 100644 --- a/config/examples/CNC/miniRambo/Configuration.h +++ b/config/examples/CNC/miniRambo/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h index d8b282674d..09017c524e 100644 --- a/config/examples/CTC/A13/Configuration.h +++ b/config/examples/CTC/A13/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/CTC/Bizer/Configuration.h b/config/examples/CTC/Bizer/Configuration.h index eb648dfa56..e504163d2b 100644 --- a/config/examples/CTC/Bizer/Configuration.h +++ b/config/examples/CTC/Bizer/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index e78404ab41..8b71f86180 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index cbfeb2222e..9a55b472ef 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -1699,7 +1699,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index 98fb64d15a..0acbb9ecfc 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index a1bf51fdbc..f1d90c88c3 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index ca4792e463..68b6ff09b1 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10 Max/Configuration.h b/config/examples/Creality/CR-10 Max/Configuration.h index 1255bb6d6b..7dc0b3a281 100644 --- a/config/examples/Creality/CR-10 Max/Configuration.h +++ b/config/examples/Creality/CR-10 Max/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 3 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index 89160c2788..72e47a920d 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h index f1858c3a53..56db9b7b22 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index 7341136507..611707b97f 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -1692,7 +1692,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index 37ef2383d2..cc18c9e26b 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 932dd80869..85cd3ed778 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h index 82eadb33c6..4696333692 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h index 61088f09e6..a72300b2f1 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 45 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index 3ce1fe2774..bf9bc61d5b 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h index 34dece2486..8cf91f588d 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h @@ -1685,7 +1685,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 25 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h index a3a812d143..f14f4ab914 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h @@ -1685,7 +1685,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index 5cd16e9e79..693250ae5a 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -1701,7 +1701,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration.h b/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration.h index 7231688562..847846dc07 100644 --- a/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration.h @@ -1702,7 +1702,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 #define PROBING_MARGIN_LEFT 45 diff --git a/config/examples/Creality/CR-10 V3/Stock/Configuration.h b/config/examples/Creality/CR-10 V3/Stock/Configuration.h index 94d55772f1..4df6ba4460 100644 --- a/config/examples/Creality/CR-10 V3/Stock/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Stock/Configuration.h @@ -1702,7 +1702,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 #define PROBING_MARGIN_LEFT 45 diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index 78e33387c2..75fe27b179 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h index 7738f2d12c..7ea336200e 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index 11d07979e9..deb0e3b432 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10S Pro/Configuration.h b/config/examples/Creality/CR-10S Pro/Configuration.h index 9124be008c..3630d8948f 100644 --- a/config/examples/Creality/CR-10S Pro/Configuration.h +++ b/config/examples/Creality/CR-10S Pro/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index 3334ec496e..351cc5beea 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h index f69b69c0f6..f96222eef0 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index 64d7fe972e..8a103a00ea 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h index 795a4af5cb..9ae19bd4df 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index 2559a78c43..fa7dfead87 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h index c4886739ca..11991fafb6 100644 --- a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index 0f827eb02b..dcaa3adcdf 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 4112ee4f71..c6c2e17f19 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h index 86333d980f..fa01821710 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-20/Stock/Configuration.h b/config/examples/Creality/CR-20/Stock/Configuration.h index 2ad35e262e..84bb9fbeab 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration.h +++ b/config/examples/Creality/CR-20/Stock/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h index 6ff27b0007..f5f7305ab1 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index fea21194dd..2f195a8b95 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 30 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 5b36d31651..d498462164 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration.h index 97075c9b09..02872e59bc 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h index fb51ab85f2..34d61c4e9d 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index b684c8a8e2..2ea36ead30 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 Max Neo/Configuration.h b/config/examples/Creality/Ender-3 Max Neo/Configuration.h index c1c6293059..02c639561a 100644 --- a/config/examples/Creality/Ender-3 Max Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 Max Neo/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index 185c1555d8..2ad06f6ccb 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -1687,7 +1687,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 Neo/Configuration.h b/config/examples/Creality/Ender-3 Neo/Configuration.h index bb46f2aec3..5435304dab 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index 583b407873..561e40ca32 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 20 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index 4137c770a8..ece8274b02 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index af01e262f7..5653bb6962 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index 9e1dfc175d..e4b4eb9bed 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h index 4c068886fe..2a6c8170b7 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration.h b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration.h index 024866c62c..62a2886dbe 100644 --- a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index d9609e8b86..9853847e5e 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index 3464df598d..03e08678b3 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration.h index acea065914..c67f9b428e 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index 1bf1a502c0..fb1db53a44 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration.h index 4dbfe28ab3..1bb339dc22 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 3 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration.h index 39f61b6eca..25fb5176c7 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h index eff4a52d9a..ee0737b020 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h index 6292482cc8..c6b257a566 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 20 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h index e182f3763f..c002b542ec 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration.h index 1102032b66..c4327d531c 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h index a68c61b5b9..2ba31ff042 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h index 0b26b889e2..2d30f0844d 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration.h index 70bfd46ae4..69a518d96d 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration.h index 6dde1952d1..b61ed26063 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration.h index 8460f1fe8d..7565d336d4 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration.h index 48e66261f9..7920a5e477 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h index f15ba0b89b..3e9bc2f064 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h index b835710dff..7c4c41509f 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration.h index bab6d16bdf..ceef4a4c21 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration.h index 12d5c4031e..ab7e994ee5 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index 406148256f..1b30437474 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h index 6321bd73ef..9c160b32cf 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h @@ -1680,7 +1680,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h index f70c888972..c86d7c7de9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 30 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index 9ed57db6e7..ad370fc0bb 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 7b8e44b5dd..fc03684806 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index 8d1c5c90f1..6a0277e645 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index e13f6bea03..d8fc21d541 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index 79e0e1a6ae..db5facf93b 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index 39f526f64e..7ab2b6e8d2 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index 9a2f85ea7d..b3b09d4dc6 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h index 2cbb6c2115..99ca34b996 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/Creality free-runs/Configuration.h b/config/examples/Creality/Ender-3/Creality free-runs/Configuration.h index bedbe6195f..4f6d2bab6a 100644 --- a/config/examples/Creality/Ender-3/Creality free-runs/Configuration.h +++ b/config/examples/Creality/Ender-3/Creality free-runs/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index 733c722430..0615e7cad7 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index 70ee594d08..941f9f7cc1 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -1690,7 +1690,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index 1f3feb9b94..7fd25f9abe 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index 636ca66cc6..a4e6341946 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index 98d40c3c17..a431ae1b3d 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h index c5da8a8b4d..1408c1bec8 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index c2fbe42281..42f1632fca 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index 77839a406c..4f09f8c239 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index 493384a796..897813204b 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -1689,7 +1689,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index e948f9e05d..2999421a92 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index 046880b457..b22572f250 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index fa8c1dd858..f71feffdfc 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h index 6f7505efa8..45b9608642 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 03985da737..21edbc0574 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h index 081c2da0c1..588b6628ad 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 5 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h index ac3a3a1d8a..14b082ca22 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h @@ -1693,7 +1693,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 5 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h index 3dd4b6cef1..85eb52385c 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h @@ -1693,7 +1693,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 5 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index 4c3fb7b552..11fd74a0d4 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 1208737853..7e0b32dbbe 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index e5d77d7b46..9ce6c01ef2 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 8 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h index eea3819f48..1af43bcd56 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index f0031660a2..ba59b348e5 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index 325304bab7..ca2d202cb1 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -1697,7 +1697,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 04ca92be49..08e8272122 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5 S1/Configuration.h b/config/examples/Creality/Ender-5 S1/Configuration.h index 6a96fa43f5..e32ab088b5 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration.h +++ b/config/examples/Creality/Ender-5 S1/Configuration.h @@ -1718,7 +1718,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 5 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 3c8bfc14f5..09f045b457 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index 4b5c4a1487..98890f2765 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index f852a7ce1f..d23175a04e 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index 167a8d9d64..7a99ee5b6e 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h index 8a4b135417..b31a02c625 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 15 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5/Creality free-runs/Configuration.h b/config/examples/Creality/Ender-5/Creality free-runs/Configuration.h index 99ee99a16e..597910126f 100644 --- a/config/examples/Creality/Ender-5/Creality free-runs/Configuration.h +++ b/config/examples/Creality/Ender-5/Creality free-runs/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index 71da05e8d0..6e40831552 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration.h index 401392e709..5232b3125d 100644 --- a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index 3b4225232e..56334664b3 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index 8e0552be81..dc71471ccf 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -1690,7 +1690,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 7270819247..8ebd130b9d 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index 04c80bad13..ee9a5ac42b 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -1687,7 +1687,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/E3D/BigBox Dual/Configuration.h b/config/examples/E3D/BigBox Dual/Configuration.h index 08af666d26..947beea1ca 100644 --- a/config/examples/E3D/BigBox Dual/Configuration.h +++ b/config/examples/E3D/BigBox Dual/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index b573f559ac..62c94322d4 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 0 // X and Y axis travel speed between probes. diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h index 22072b085f..73686f21d8 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Eazao/Zero/Configuration.h b/config/examples/Eazao/Zero/Configuration.h index 8936ee36fc..2c2cfa0c6a 100644 --- a/config/examples/Eazao/Zero/Configuration.h +++ b/config/examples/Eazao/Zero/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index a880f0fbbe..ba00018ac3 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -1688,7 +1688,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Elegoo/Neptune 2/Configuration.h b/config/examples/Elegoo/Neptune 2/Configuration.h index b1921c576c..96ae557a67 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration.h +++ b/config/examples/Elegoo/Neptune 2/Configuration.h @@ -1739,7 +1739,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 20 // X and Y axis travel speed between probes. diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index 2366c17995..fbf2ff2637 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -1706,7 +1706,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index 3c0c2b198b..b6e9dc94af 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -1707,7 +1707,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index c54573a1db..06f59ef66a 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 3f7876737a..eac2a34d25 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -1685,7 +1685,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index 4c0223fc6d..dab79be616 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index d5262668c5..537f774531 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index f0b09035f7..1bed85088b 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index 902621aa92..ad7e1c44dc 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 893b819708..f665f72d74 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration.h b/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration.h index 7912f9e094..ea14760d8e 100644 --- a/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration.h +++ b/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h index 2adbda26f4..52032e27bc 100644 --- a/config/examples/FlyingBear/P902/Configuration.h +++ b/config/examples/FlyingBear/P902/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index cdd672549c..f019883ff8 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -1687,7 +1687,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 20 // X and Y axis travel speed between probes. diff --git a/config/examples/FoamCutter/generic/Configuration.h b/config/examples/FoamCutter/generic/Configuration.h index 1fa8845541..629fdd3f3a 100644 --- a/config/examples/FoamCutter/generic/Configuration.h +++ b/config/examples/FoamCutter/generic/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/FoamCutter/rcKeith/Configuration.h b/config/examples/FoamCutter/rcKeith/Configuration.h index 1f10763e21..c35c7392a1 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration.h +++ b/config/examples/FoamCutter/rcKeith/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration.h b/config/examples/FolgerTech/FT-5 R2/Configuration.h index 1945badeae..f114199300 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration.h @@ -1680,7 +1680,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index c17e792426..32dea100a9 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -1685,7 +1685,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 0 // X and Y axis travel speed between probes. diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 992c458325..cec441baa1 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -1774,7 +1774,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 225a6198fa..d4f4b4b2c5 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index 505fac1581..36dec0a006 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index 1cd36f3b09..8c8fb6b663 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index 2fb59df6e9..540031199c 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index 7dbd9465c0..efd6f9c852 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index 8d18646912..301053f969 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index d2feddb7b6..2ca5dbcf9a 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index 9f7b441084..cbe52e9fb9 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 24487bbf62..9d0f92d1bc 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 76067d4b6b..f817f37806 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index 65bf39304b..150ad31cbb 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -1681,7 +1681,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 0 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index a15b2c2103..6d20fd7f19 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -1681,7 +1681,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 0 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index 8c657bf933..db060e3b46 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -1681,7 +1681,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 0 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index f4844e6d9c..94fbb0ca6a 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -1681,7 +1681,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 0 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index f79aeb8781..26139f890b 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 0 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 969a1be184..53c6a7ee64 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 0 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index e12d913264..e02bea9b8d 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -1688,7 +1688,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 096a472c3c..9bd7bb5ee8 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 8 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index 5cdbb321bb..6c12a823f9 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -1681,7 +1681,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 0 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index d634c856cc..deb6be511b 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index de9f848a8a..77a793a678 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 0 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index e0817f305b..5090d7bcc4 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 0 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index 4ca53671a4..2618d837c9 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -1693,7 +1693,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 57dc1833f8..5cfa91eb27 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -1693,7 +1693,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 7d96e681ee..3b53d516a4 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -1693,7 +1693,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 0bf1f25f0c..417d92abb2 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 45cf12adfa..89f4cb014c 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 13 // X and Y axis travel speed between probes. diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index 3d04bcffd0..6b6c0b4602 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -1681,7 +1681,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 20 // X and Y axis travel speed between probes. diff --git a/config/examples/Hictop/3DP-17/Configuration.h b/config/examples/Hictop/3DP-17/Configuration.h index 1f0e4391a6..96954ec918 100644 --- a/config/examples/Hictop/3DP-17/Configuration.h +++ b/config/examples/Hictop/3DP-17/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 1bd76ddd3e..170608eb8f 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index 52dcaca40b..1edfc0ad16 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 3df0b8563c..c38783b07e 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -1687,7 +1687,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index b8d3721263..1d93ed8c58 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index ff05471840..404cdfad2b 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 7d53e99e11..50c2c32550 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -1687,7 +1687,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index 212622e39b..3105346c37 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index fcf59d115f..9e7810ca19 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -1682,7 +1682,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 5 // X and Y axis travel speed between probes. diff --git a/config/examples/Kingroon/KP3S/Configuration.h b/config/examples/Kingroon/KP3S/Configuration.h index 5f73ba5564..d07e5645bf 100644 --- a/config/examples/Kingroon/KP3S/Configuration.h +++ b/config/examples/Kingroon/KP3S/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 5 // X and Y axis travel speed between probes. diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration.h b/config/examples/Kingroon/KP3S_Pro/Configuration.h index d662a5c56b..a425ac3eaf 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration.h @@ -1714,7 +1714,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 5 // X and Y axis travel speed between probes. diff --git a/config/examples/Kingroon/KP5L-DIY/Configuration.h b/config/examples/Kingroon/KP5L-DIY/Configuration.h index b5fe3954c3..1c775a8b1f 100644 --- a/config/examples/Kingroon/KP5L-DIY/Configuration.h +++ b/config/examples/Kingroon/KP5L-DIY/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 30 // X and Y axis travel speed between probes. diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index 16aaaa3d21..5d86a3972f 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -1689,7 +1689,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 25 // X and Y axis travel speed between probes. diff --git a/config/examples/Longer/LK5/Configuration.h b/config/examples/Longer/LK5/Configuration.h index c2a8d021ea..335925923d 100644 --- a/config/examples/Longer/LK5/Configuration.h +++ b/config/examples/Longer/LK5/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index 75996ed29f..7eb993fdda 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -1694,7 +1694,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index e1d785e32c..7465798ec8 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/MakerBot/Replicator Dual/Configuration.h b/config/examples/MakerBot/Replicator Dual/Configuration.h index 82b06281ba..26fc248bb5 100644 --- a/config/examples/MakerBot/Replicator Dual/Configuration.h +++ b/config/examples/MakerBot/Replicator Dual/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/MakerBot/Replicator Single/Configuration.h b/config/examples/MakerBot/Replicator Single/Configuration.h index ad6deaf1ce..e654a2e1c8 100644 --- a/config/examples/MakerBot/Replicator Single/Configuration.h +++ b/config/examples/MakerBot/Replicator Single/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index 7eda25f22d..01d0346eb2 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -1689,7 +1689,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 1 // X and Y axis travel speed between probes. diff --git a/config/examples/MakerGear/M2 Rev H/Configuration.h b/config/examples/MakerGear/M2 Rev H/Configuration.h index 29efe0f986..a17dbc9a02 100644 --- a/config/examples/MakerGear/M2 Rev H/Configuration.h +++ b/config/examples/MakerGear/M2 Rev H/Configuration.h @@ -1686,7 +1686,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index bf8a7729ef..1ce08e87c6 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h index 63a28f74c3..5555ca64d5 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h @@ -1686,7 +1686,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index bd34e473ca..f77b54f903 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -1707,7 +1707,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h index 927bff9248..31a1432edb 100644 --- a/config/examples/Malyan/M180/Configuration.h +++ b/config/examples/Malyan/M180/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index de2768d954..aa3afa33ee 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -1689,7 +1689,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Materia101/Configuration.h b/config/examples/Materia101/Configuration.h index 79f10ce51f..eaf5b788f1 100644 --- a/config/examples/Materia101/Configuration.h +++ b/config/examples/Materia101/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 16060a7b38..6709b6294a 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -1687,7 +1687,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index dedcd5c590..5a28f90ca7 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -1687,7 +1687,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 2880624b7c..3437e0dcdc 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index e8b4163d07..04dec55f4a 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index 87318272a3..caadbc87b8 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -1685,7 +1685,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 0847886096..8e2b5a5bbc 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index d3cc9b3583..69f4d01683 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index f8ff76465d..3a5ada31b7 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h index c28b5d4cb4..5333746610 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h @@ -1714,7 +1714,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Opulo/Lumen_REV3/Configuration.h b/config/examples/Opulo/Lumen_REV3/Configuration.h index 19a699df29..f141d1ee56 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Opulo/Lumen_REV4/Configuration.h b/config/examples/Opulo/Lumen_REV4/Configuration.h index 81cf98eacd..0e78c17539 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Opulo/Lumen_REV5/Configuration.h b/config/examples/Opulo/Lumen_REV5/Configuration.h index eb0ddfa3bc..78cccfb4b2 100644 --- a/config/examples/Opulo/Lumen_REV5/Configuration.h +++ b/config/examples/Opulo/Lumen_REV5/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index 977e0381e3..add11f219f 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 20 // X and Y axis travel speed between probes. diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h index 5e5362d8b9..e48478b5fd 100644 --- a/config/examples/Polargraph/Configuration.h +++ b/config/examples/Polargraph/Configuration.h @@ -1687,7 +1687,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 3054f176ef..3a8d7748e5 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -1685,7 +1685,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index bfeb6dede9..7380eb015b 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Printrbot/Simple_Metal_RevF6/Configuration.h b/config/examples/Printrbot/Simple_Metal_RevF6/Configuration.h index 6dd4de335b..04b7611bbb 100644 --- a/config/examples/Printrbot/Simple_Metal_RevF6/Configuration.h +++ b/config/examples/Printrbot/Simple_Metal_RevF6/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index 0efbde2175..8f542c7004 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -1713,7 +1713,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 0 // X and Y axis travel speed between probes. diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index a4299b3197..22d5d568d2 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -1703,7 +1703,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index a4fbe01927..0a1eff53e1 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index 5f687f1366..85ff55b8b9 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -1714,7 +1714,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index c205c9abc1..8d91632998 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 3c2ec7208d..c6ccae28da 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -1688,7 +1688,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index 7d2d0a09ef..f162660d6a 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -1688,7 +1688,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index c3375a2211..11855c70fc 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -1688,7 +1688,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index a31deb801f..0d9e70247a 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -1724,7 +1724,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index c1b4c5ee9d..563c6813d9 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/RepRapWorld/Minitronics11/Configuration.h b/config/examples/RepRapWorld/Minitronics11/Configuration.h index 968640484f..bff69b3ea4 100644 --- a/config/examples/RepRapWorld/Minitronics11/Configuration.h +++ b/config/examples/RepRapWorld/Minitronics11/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h index 6e17eacc57..f7586ac6d4 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index 136ef6db76..ebe25d1fe8 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -1697,7 +1697,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index 9b90639dd9..ced08dd90c 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Rolohaun/Rook MK1/Configuration.h b/config/examples/Rolohaun/Rook MK1/Configuration.h index 19130be90a..1e95facd40 100644 --- a/config/examples/Rolohaun/Rook MK1/Configuration.h +++ b/config/examples/Rolohaun/Rook MK1/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 0 // X and Y axis travel speed between probes. diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index 511ffeab86..12a363ac6e 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -1685,7 +1685,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 083c69701e..f6ab2bc6f0 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 9930c82c54..47c584c8c4 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index 713eb98d00..f8f18dbf0c 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Simax/Mi-M200/Configuration.h b/config/examples/Simax/Mi-M200/Configuration.h index 2d273816d3..47c22e569e 100644 --- a/config/examples/Simax/Mi-M200/Configuration.h +++ b/config/examples/Simax/Mi-M200/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h index adf61fb569..02014a3993 100644 --- a/config/examples/Simulator/Configuration.h +++ b/config/examples/Simulator/Configuration.h @@ -1699,7 +1699,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h index 99d17b0698..3e61a9b01a 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index 5b771d04cc..5a5a5d4c96 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1689,7 +1689,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h index e8738c08c1..0f1b5354d3 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 25 // X and Y axis travel speed between probes. diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index 0870f41bd7..0741394d7e 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -1688,7 +1688,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index 224ac045e7..544f660d11 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -1688,7 +1688,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Sovol/SV-02/Configuration.h b/config/examples/Sovol/SV-02/Configuration.h index c679944b07..7aa0471669 100644 --- a/config/examples/Sovol/SV-02/Configuration.h +++ b/config/examples/Sovol/SV-02/Configuration.h @@ -1688,7 +1688,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Sovol/SV-03/Configuration.h b/config/examples/Sovol/SV-03/Configuration.h index c73ef0be8f..04f50dab91 100644 --- a/config/examples/Sovol/SV-03/Configuration.h +++ b/config/examples/Sovol/SV-03/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Sovol/SV-05/Configuration.h b/config/examples/Sovol/SV-05/Configuration.h index 657ab0d19e..7541f9afe4 100644 --- a/config/examples/Sovol/SV-05/Configuration.h +++ b/config/examples/Sovol/SV-05/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Sovol/SV-06 Plus/Configuration.h b/config/examples/Sovol/SV-06 Plus/Configuration.h index a301ebb03f..594b76410a 100644 --- a/config/examples/Sovol/SV-06 Plus/Configuration.h +++ b/config/examples/Sovol/SV-06 Plus/Configuration.h @@ -1687,7 +1687,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. //#define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Sovol/SV-06/Configuration.h b/config/examples/Sovol/SV-06/Configuration.h index 3b3fc16dbe..ea4c2e6722 100644 --- a/config/examples/Sovol/SV-06/Configuration.h +++ b/config/examples/Sovol/SV-06/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 0 // X and Y axis travel speed between probes. diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h index cdc3291b79..a847cc8d9b 100644 --- a/config/examples/Sunlu/S8/Configuration.h +++ b/config/examples/Sunlu/S8/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Sunlu/T3/Configuration.h b/config/examples/Sunlu/T3/Configuration.h index 91aa3f9a72..717a0a6250 100644 --- a/config/examples/Sunlu/T3/Configuration.h +++ b/config/examples/Sunlu/T3/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 30 // X and Y axis travel speed between probes. diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index 2ec020d4b1..4b2ca5012a 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -1687,7 +1687,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index f8a3e78acf..62d6111855 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index 788f067314..89626cadd5 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h index 6d6c7b0ba4..60519b559e 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h index edaa7ecac8..cd8b910a8a 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 6cb174d30c..868549c4f9 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h index 7ab4c0d77b..40c92fabf4 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h index bb3d0f05c4..3411d047e7 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index a33fc1e62d..bc006cc6a6 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -1723,7 +1723,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h index 666d2b2c2d..a7be59a06e 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h @@ -1692,7 +1692,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 4f420823a3..e35ccac85c 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 1fde15fc75..954d25bdbe 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 50 // X and Y axis travel speed between probes. diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h index e97ec98cac..2f4feae19c 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 20 // X and Y axis travel speed between probes. diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h index 0965caa3ca..801472912d 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h @@ -1692,7 +1692,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 7b70357acb..3fc424dfe5 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h index 0c86fd33d0..3aa2639a19 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration.h @@ -1685,7 +1685,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 50 // X and Y axis travel speed between probes. diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 12f874373a..7fe7ee9a81 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -1685,7 +1685,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 50 // X and Y axis travel speed between probes. diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 621c3a818c..d1c87324de 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -1690,7 +1690,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Tronxy/XY2-Pro/Configuration.h b/config/examples/Tronxy/XY2-Pro/Configuration.h index 8c49f3b911..405f8cdbb5 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration.h @@ -1719,7 +1719,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 0 // X and Y axis travel speed between probes. diff --git a/config/examples/Turnigy/Fabrikator/Configuration.h b/config/examples/Turnigy/Fabrikator/Configuration.h index 2fefa452a7..d6823bf57b 100644 --- a/config/examples/Turnigy/Fabrikator/Configuration.h +++ b/config/examples/Turnigy/Fabrikator/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index 1f6f3666bc..3e116802d6 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -1685,7 +1685,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 15 // X and Y axis travel speed between probes. diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index bc6425c844..7186a56c91 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -1702,7 +1702,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index 15841fe51b..94671be196 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -1703,7 +1703,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index c9e7e8d390..45f1a47a0d 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -1714,7 +1714,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Two Trees/SP-5_V3/Configuration.h b/config/examples/Two Trees/SP-5_V3/Configuration.h index 7c092c2172..1ca31be178 100644 --- a/config/examples/Two Trees/SP-5_V3/Configuration.h +++ b/config/examples/Two Trees/SP-5_V3/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h index faeb7390bb..3ba5912f4a 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h @@ -1710,7 +1710,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 1d6e535113..34fe659fbe 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -1710,7 +1710,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index f5a029ebcd..ad990e570c 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -1700,7 +1700,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index eac3cc15d5..a9f6668bef 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index c80cdc0275..8d14211c67 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h index 7fc9d4221d..d48902e32e 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h @@ -1686,7 +1686,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 5 // X and Y axis travel speed between probes. diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration.h b/config/examples/Ultimaker/Ultimaker 2/Configuration.h index 8a6d420790..b7b9fee571 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration.h @@ -1698,7 +1698,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index a29b84bc5d..256c0d5eb2 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h index b9a40cba66..ff5c5149dc 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h @@ -1686,7 +1686,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 5 // X and Y axis travel speed between probes. diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h index 5851f07c4f..025923249d 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h @@ -1687,7 +1687,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 1557c9909b..8bc36fb074 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration.h b/config/examples/Velleman/K8200 Upgraded/Configuration.h index b1cc21fe18..19136e0643 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration.h @@ -1716,7 +1716,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 0b4e9c7b21..6742103c25 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -1718,7 +1718,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 74d8ed5acb..600a33535f 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 0470c24652..f83828746f 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h index 83c3d4cadf..9051ac53f8 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index f23fba2027..600d6913b4 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -1697,7 +1697,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index 1e245223a4..cb9dc2ca56 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index e839015d8b..7c443c75bc 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration.h index 568c15f9a2..bb226bf274 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration.h index c1b03602f4..324ad4a74e 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration.h index ceba810542..97ca3a350e 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration.h index 4f4fc5e371..e245c2049c 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration.h index ab19ec45e7..2610cdf5c8 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration.h index 2a7d111b5c..0f496f170c 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration.h index 7a39612113..0f53d23da7 100644 --- a/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration.h index bb70bb08fa..5d2a39de9c 100644 --- a/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration.h index 5355c74caf..2480ffda32 100644 --- a/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration.h index fdfc84150c..0766fafaef 100644 --- a/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration.h index d8b7bf07c7..9e5c2cfa88 100644 --- a/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration.h index 760c9774ac..9edacb0bd1 100644 --- a/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index 3cb7c9f36c..4645cc01fa 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index bd5bf97755..d87c37dbbc 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h index e13624e061..210e018289 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Weedo/Tina2/V2/Configuration.h b/config/examples/Weedo/Tina2/V2/Configuration.h index 22f47f912b..fc16c57240 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration.h +++ b/config/examples/Weedo/Tina2/V2/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 7 // X and Y axis travel speed between probes. diff --git a/config/examples/Weedo/Tina2/V3/Configuration.h b/config/examples/Weedo/Tina2/V3/Configuration.h index 87ada30675..05bc23609c 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration.h +++ b/config/examples/Weedo/Tina2/V3/Configuration.h @@ -1683,7 +1683,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 7 // X and Y axis travel speed between probes. diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index 12f8704e70..2b15d83001 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index 4e7d5a587f..07ab74374a 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 50 // X and Y axis travel speed between probes. diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index 7e3d4560f4..74c3b5773a 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -1688,7 +1688,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 20 // X and Y axis travel speed between probes. diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index 8295c300fc..180b5b08ac 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -1687,7 +1687,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 8065f819cb..482782ae1e 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -1754,7 +1754,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index d3ed5a6e35..7588e80beb 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -1750,7 +1750,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 15 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index e19fe061a3..18e45d6f49 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index 54b19b31d7..006167c8e3 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -1690,7 +1690,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 5 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 03108c2d2e..36ed4f14d4 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -1697,7 +1697,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 5 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index a490a93a45..cd92655cea 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -1692,7 +1692,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 15 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index 2aa739e616..8a42415325 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -1690,7 +1690,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 20 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index b7a28e1c86..b29719e30e 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 20 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index b8b43d45e9..dc83770caf 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 15 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 2eb2156148..6d988fedc1 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1694,7 +1694,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 20 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index e64c9992da..e1315e2c7e 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1693,7 +1693,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 20 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index f58b20730a..efcfa9a117 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1693,7 +1693,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index e9a5058fa9..dfb537c735 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 1 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index c6e12facaf..7fb3789560 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 1 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 00b1acc357..91bb9e14df 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 1 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index e1deb7e1de..cf84e23473 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 1 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 43697e8222..d54c320264 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index c0441cdd9e..390705349c 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -1696,7 +1696,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index ce0dbe2d8f..e330fc0138 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index cd8b919c57..b66d202d04 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -1684,7 +1684,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 5.0 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h b/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h index 47bf92ab70..85395775b6 100644 --- a/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h +++ b/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h @@ -1700,7 +1700,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h b/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h index c8bf862663..db982cf262 100644 --- a/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h +++ b/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h @@ -1703,7 +1703,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 9e89c9893b..b33ff95ad2 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -1692,7 +1692,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/Velleman/K8800/Configuration.h b/config/examples/delta/Velleman/K8800/Configuration.h index cdf55bfe48..af0163b482 100644 --- a/config/examples/delta/Velleman/K8800/Configuration.h +++ b/config/examples/delta/Velleman/K8800/Configuration.h @@ -1718,7 +1718,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 15 #define HOMING_FEEDRATE_Z (100*60) diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index c61a2ccb72..702fe295f8 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -1691,7 +1691,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 98c544781b..d24cab1a7f 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -1692,7 +1692,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 1 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index a85c8cd570..ca3d86a42e 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -1693,7 +1693,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index dff9169104..2bc0dedb3b 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -1711,7 +1711,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 4bbd95bd8c..8edb630441 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -1697,7 +1697,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 3491ba35b4..fe186cbf85 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -1690,7 +1690,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 45 // X and Y axis travel speed between probes. diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h index c961290b1b..3e7e79cdad 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h @@ -1695,7 +1695,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h index 4a9cb195aa..c271928f34 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h @@ -1670,7 +1670,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 9eee2fc75c..a0c78eefb2 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -1686,7 +1686,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes. diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 60d539994d..ed2e65bdb4 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -1690,7 +1690,8 @@ //#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up -// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area. +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed between probes.