3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2026-01-18 05:45:39 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions

🔧 Unified Linear Advance K
Some checks are pending
Deploy / deploy (push) Waiting to run
Details

Browse source 
MarlinFirmware/Marlin#28127
This commit is contained in:
Scott Lahteine 2025-11-01 17:02:58 -05:00
parent 86b76f95e6
commit d51a3b6ecd
401 changed files with 3208 additions and 2807 deletions
Download patch file Download diff file Expand all files Collapse all files

15
config/default/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2388,13 +2385,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/3DMatik/XL/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file

@ -1163,9 +1163,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2402,13 +2399,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2393,13 +2390,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/AliExpress/CL-260/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Anet/A2/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Anet/A6/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Anet/A8/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Anet/A8plus/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Anet/A9/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Anet/E10/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Anet/E16/Stock/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Anet/ET4+/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Anet/ET4-Pro/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Anet/ET4/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Anet/ET4X/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Anet/ET5-Pro/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Anet/ET5/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Anet/ET5X/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.00 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.00 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.00 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.00 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/AnyCubic/Vyper/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.8 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.8 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.8 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.8 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/ArmEd/Configuration_adv.h
View file

@ -1159,9 +1159,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2397,13 +2394,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Artillery/Genius Pro/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Artillery/Genius/BLTouch/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Artillery/Genius/V1/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Artillery/Hornet/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.20 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.20 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.20 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.20 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Artillery/Sidewinder X2/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Azteeg/X5GT/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2389,13 +2386,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/BIQU/B1 SE Plus/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/BIQU/B1 SE/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/BIQU/B1/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2394,13 +2391,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h
View file

@ -1155,9 +1155,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2395,13 +2392,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/BIQU/BX/base/Configuration_adv.h
View file

@ -1155,9 +1155,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2395,13 +2392,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/BIQU/Hurakan/Configuration_adv.h
View file

@ -1155,9 +1155,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2393,13 +2390,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/BIQU/Thunder Standard/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2400,13 +2397,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/CNC/miniRambo/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/CTC/A13/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/CTC/Bizer/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Cartesio/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Copymaster3D/300/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Copymaster3D/400/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Copymaster3D/500/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10 Max/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2393,13 +2390,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h
View file

@ -1153,9 +1153,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2391,13 +2388,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2393,13 +2390,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10 V2/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2395,13 +2392,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration_adv.h
View file

@ -1156,9 +1156,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2397,13 +2394,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10 V3/Stock/Configuration_adv.h
View file

@ -1156,9 +1156,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2397,13 +2394,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10S Pro/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2393,13 +2390,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-20 Pro/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-20/Stock/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-30 PrintMill/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-6 SE/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2393,13 +2390,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2393,13 +2390,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2392,13 +2389,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/Ender-3 Max/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2393,13 +2390,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

15
config/examples/Creality/Ender-3 Neo/Configuration_adv.h
View file

@ -1154,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -2393,13 +2390,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.

Some files were not shown because too many files have changed in this diff Show more