diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index c715fe3332..d06fe732a4 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -340,7 +340,6 @@
  *
  * The fan turns on automatically whenever any driver is enabled and turns
  * off (or reduces to idle speed) shortly after drivers are turned off.
- *
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
@@ -1060,9 +1059,6 @@
    * during SD printing. If the recovery file is found at boot time, present
    * an option on the LCD screen to continue the print from the last-known
    * point in the file.
-   *
-   * If the machine reboots when resuming a print you may need to replace or
-   * reformat the SD card. (Bad sectors delay startup triggering the watchdog.)
    */
   //#define POWER_LOSS_RECOVERY
   #if ENABLED(POWER_LOSS_RECOVERY)
diff --git a/config/examples/BigTreeTech/BTT002 - Prusa MK3S - TMC2209/Configuration_adv.h b/config/examples/BigTreeTech/BTT002 - Prusa MK3S - TMC2209/Configuration_adv.h
index e000ff7746..4e5edc2861 100644
--- a/config/examples/BigTreeTech/BTT002 - Prusa MK3S - TMC2209/Configuration_adv.h	
+++ b/config/examples/BigTreeTech/BTT002 - Prusa MK3S - TMC2209/Configuration_adv.h	
@@ -340,7 +340,6 @@
  *
  * The fan turns on automatically whenever any driver is enabled and turns
  * off (or reduces to idle speed) shortly after drivers are turned off.
- *
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
@@ -1056,9 +1055,6 @@
    * during SD printing. If the recovery file is found at boot time, present
    * an option on the LCD screen to continue the print from the last-known
    * point in the file.
-   *
-   * If the machine reboots when resuming a print you may need to replace or
-   * reformat the SD card. (Bad sectors delay startup triggering the watchdog.)
    */
   #define POWER_LOSS_RECOVERY
   #if ENABLED(POWER_LOSS_RECOVERY)
diff --git a/config/examples/Copymaster3D/300/Configuration_adv.h b/config/examples/Copymaster3D/300/Configuration_adv.h
index c715fe3332..d06fe732a4 100644
--- a/config/examples/Copymaster3D/300/Configuration_adv.h
+++ b/config/examples/Copymaster3D/300/Configuration_adv.h
@@ -340,7 +340,6 @@
  *
  * The fan turns on automatically whenever any driver is enabled and turns
  * off (or reduces to idle speed) shortly after drivers are turned off.
- *
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
@@ -1060,9 +1059,6 @@
    * during SD printing. If the recovery file is found at boot time, present
    * an option on the LCD screen to continue the print from the last-known
    * point in the file.
-   *
-   * If the machine reboots when resuming a print you may need to replace or
-   * reformat the SD card. (Bad sectors delay startup triggering the watchdog.)
    */
   //#define POWER_LOSS_RECOVERY
   #if ENABLED(POWER_LOSS_RECOVERY)
diff --git a/config/examples/Copymaster3D/400/Configuration_adv.h b/config/examples/Copymaster3D/400/Configuration_adv.h
index c715fe3332..d06fe732a4 100644
--- a/config/examples/Copymaster3D/400/Configuration_adv.h
+++ b/config/examples/Copymaster3D/400/Configuration_adv.h
@@ -340,7 +340,6 @@
  *
  * The fan turns on automatically whenever any driver is enabled and turns
  * off (or reduces to idle speed) shortly after drivers are turned off.
- *
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
@@ -1060,9 +1059,6 @@
    * during SD printing. If the recovery file is found at boot time, present
    * an option on the LCD screen to continue the print from the last-known
    * point in the file.
-   *
-   * If the machine reboots when resuming a print you may need to replace or
-   * reformat the SD card. (Bad sectors delay startup triggering the watchdog.)
    */
   //#define POWER_LOSS_RECOVERY
   #if ENABLED(POWER_LOSS_RECOVERY)
diff --git a/config/examples/Copymaster3D/500/Configuration_adv.h b/config/examples/Copymaster3D/500/Configuration_adv.h
index c715fe3332..d06fe732a4 100644
--- a/config/examples/Copymaster3D/500/Configuration_adv.h
+++ b/config/examples/Copymaster3D/500/Configuration_adv.h
@@ -340,7 +340,6 @@
  *
  * The fan turns on automatically whenever any driver is enabled and turns
  * off (or reduces to idle speed) shortly after drivers are turned off.
- *
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
@@ -1060,9 +1059,6 @@
    * during SD printing. If the recovery file is found at boot time, present
    * an option on the LCD screen to continue the print from the last-known
    * point in the file.
-   *
-   * If the machine reboots when resuming a print you may need to replace or
-   * reformat the SD card. (Bad sectors delay startup triggering the watchdog.)
    */
   //#define POWER_LOSS_RECOVERY
   #if ENABLED(POWER_LOSS_RECOVERY)
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index 3b5d075927..43bfc09a6f 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -1059,9 +1059,6 @@
    * during SD printing. If the recovery file is found at boot time, present
    * an option on the LCD screen to continue the print from the last-known
    * point in the file.
-   *
-   * If the machine reboots when resuming a print you may need to replace or
-   * reformat the SD card. (Bad sectors delay startup triggering the watchdog.)
    */
   //#define POWER_LOSS_RECOVERY
   #if ENABLED(POWER_LOSS_RECOVERY)
diff --git a/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h
index 8e7f8a5c09..54e649eee4 100644
--- a/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h
+++ b/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h
@@ -340,7 +340,6 @@
  *
  * The fan turns on automatically whenever any driver is enabled and turns
  * off (or reduces to idle speed) shortly after drivers are turned off.
- *
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
@@ -1060,9 +1059,6 @@
    * during SD printing. If the recovery file is found at boot time, present
    * an option on the LCD screen to continue the print from the last-known
    * point in the file.
-   *
-   * If the machine reboots when resuming a print you may need to replace or
-   * reformat the SD card. (Bad sectors delay startup triggering the watchdog.)
    */
   //#define POWER_LOSS_RECOVERY
   #if ENABLED(POWER_LOSS_RECOVERY)