diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
index cb70e304bf..d32d1e491e 100644
--- a/config/examples/Anet/A6/Configuration.h
+++ b/config/examples/Anet/A6/Configuration.h
@@ -1056,14 +1056,13 @@
 #if 1 // 0 for less clearance
   #define Z_CLEARANCE_DEPLOY_PROBE   10 // Z Clearance for Deploy/Stow
   #define Z_CLEARANCE_BETWEEN_PROBES  5 // Z Clearance between probe points
-  //#define Z_AFTER_PROBING           5 // Z position after probing is done
 #else
   #define Z_CLEARANCE_DEPLOY_PROBE    5 // Z Clearance for Deploy/Stow
   #define Z_CLEARANCE_BETWEEN_PROBES  3 // Z Clearance between probe points
-  //#define Z_AFTER_PROBING           3 // Z position after probing is done
 #endif
 
 #define Z_CLEARANCE_MULTI_PROBE       5 // Z Clearance between multiple probes
+//#define Z_AFTER_PROBING           5 // Z position after probing is done
 #define Z_PROBE_LOW_POINT          -2 // Farthest distance below the trigger-point to go before stopping
 
 // For M851 give a range for adjusting the Z probe offset
diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h
index bcb5be51b5..86baa3c970 100644
--- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h	
+++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h	
@@ -2370,7 +2370,7 @@
 //
 // Ender-3 v2 OEM display. A DWIN display with Rotary Encoder.
 //
-// #define DWIN_CREALITY_LCD
+//#define DWIN_CREALITY_LCD
 
 //
 // ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8
diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h
index 3117b802d3..ff2236afb8 100644
--- a/config/examples/Two Trees/Sapphire Pro/Configuration.h	
+++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h	
@@ -1090,7 +1090,7 @@
 #ifdef SPRO_INVERTED_E
   #define INVERT_E0_DIR true
 #else
-  #define INVERT_E0_DIR false 
+  #define INVERT_E0_DIR false
 #endif
 #define INVERT_E1_DIR false
 #define INVERT_E2_DIR false
@@ -1179,25 +1179,41 @@
   #define NUM_RUNOUT_SENSORS   1          // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
 
   #define FIL_RUNOUT_STATE     LOW        // Pin state indicating that filament is NOT present.
-  #define FIL_RUNOUT_PULL                 // Use internal pullup / pulldown for filament runout pins.
+  #define FIL_RUNOUT_PULLUP               // Use internal pullup for filament runout pins.
+  //#define FIL_RUNOUT_PULLDOWN           // Use internal pulldown for filament runout pins.
 
   // Override individually if the runout sensors vary
   //#define FIL_RUNOUT1_STATE LOW
-  //#define FIL_RUNOUT1_PULL
+  //#define FIL_RUNOUT1_PULLUP
+  //#define FIL_RUNOUT1_PULLDOWN
+
   //#define FIL_RUNOUT2_STATE LOW
-  //#define FIL_RUNOUT2_PULL
+  //#define FIL_RUNOUT2_PULLUP
+  //#define FIL_RUNOUT2_PULLDOWN
+
   //#define FIL_RUNOUT3_STATE LOW
-  //#define FIL_RUNOUT3_PULL
+  //#define FIL_RUNOUT3_PULLUP
+  //#define FIL_RUNOUT3_PULLDOWN
+
   //#define FIL_RUNOUT4_STATE LOW
-  //#define FIL_RUNOUT4_PULL
+  //#define FIL_RUNOUT4_PULLUP
+  //#define FIL_RUNOUT4_PULLDOWN
+
   //#define FIL_RUNOUT5_STATE LOW
-  //#define FIL_RUNOUT5_PULL
+  //#define FIL_RUNOUT5_PULLUP
+  //#define FIL_RUNOUT5_PULLDOWN
+
   //#define FIL_RUNOUT6_STATE LOW
-  //#define FIL_RUNOUT6_PULL
+  //#define FIL_RUNOUT6_PULLUP
+  //#define FIL_RUNOUT6_PULLDOWN
+
   //#define FIL_RUNOUT7_STATE LOW
-  //#define FIL_RUNOUT7_PULL
+  //#define FIL_RUNOUT7_PULLUP
+  //#define FIL_RUNOUT7_PULLDOWN
+
   //#define FIL_RUNOUT8_STATE LOW
-  //#define FIL_RUNOUT8_PULL
+  //#define FIL_RUNOUT8_PULLUP
+  //#define FIL_RUNOUT8_PULLDOWN
 
   // Set one or more commands to execute on filament runout.
   // (After 'M412 H' Marlin will ask the host to handle the process.)
diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h
index 0a7b1c6053..120ddf9666 100644
--- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h
+++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h
@@ -623,7 +623,7 @@
   // Delta calibration menu
   // uncomment to add three points calibration menu option.
   // See http://minow.blogspot.com/index.html#4918805519571907051
-  // #define DELTA_CALIBRATION_MENU
+  //#define DELTA_CALIBRATION_MENU
 
   // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
   #define DELTA_AUTO_CALIBRATION