diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
index 9c7f2ba054..54b505d60f 100644
--- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
@@ -1703,6 +1703,7 @@
   //#define BABYSTEP_MILLIMETER_UNITS       // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
   #define BABYSTEP_MULTIPLICATOR_Z  10      // (steps or mm) Steps or millimeter distance for each Z babystep
   #define BABYSTEP_MULTIPLICATOR_XY 10      // (steps or mm) Steps or millimeter distance for each Z babystep
+
   #define DOUBLECLICK_FOR_Z_BABYSTEPPING    // Double-click on the Status Screen for Z Babystepping.
   #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
     #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
@@ -2449,7 +2450,7 @@
 
   #if AXIS_IS_TMC(E1)
     #define E1_CURRENT      800
-    #define E1_MICROSTEPS   E0_MICROSTEPS
+    #define E1_MICROSTEPS    E0_MICROSTEPS
     #define E1_RSENSE         0.11
     #define E1_CHAIN_POS     -1
     //#define E1_INTERPOLATE true
@@ -2457,7 +2458,7 @@
 
   #if AXIS_IS_TMC(E2)
     #define E2_CURRENT      800
-    #define E2_MICROSTEPS   E0_MICROSTEPS
+    #define E2_MICROSTEPS    E0_MICROSTEPS
     #define E2_RSENSE         0.11
     #define E2_CHAIN_POS     -1
     //#define E2_INTERPOLATE true
@@ -2465,7 +2466,7 @@
 
   #if AXIS_IS_TMC(E3)
     #define E3_CURRENT      800
-    #define E3_MICROSTEPS   E0_MICROSTEPS
+    #define E3_MICROSTEPS    E0_MICROSTEPS
     #define E3_RSENSE         0.11
     #define E3_CHAIN_POS     -1
     //#define E3_INTERPOLATE true
@@ -2473,7 +2474,7 @@
 
   #if AXIS_IS_TMC(E4)
     #define E4_CURRENT      800
-    #define E4_MICROSTEPS   E0_MICROSTEPS
+    #define E4_MICROSTEPS    E0_MICROSTEPS
     #define E4_RSENSE         0.11
     #define E4_CHAIN_POS     -1
     //#define E4_INTERPOLATE true
@@ -2481,7 +2482,7 @@
 
   #if AXIS_IS_TMC(E5)
     #define E5_CURRENT      800
-    #define E5_MICROSTEPS   E0_MICROSTEPS
+    #define E5_MICROSTEPS    E0_MICROSTEPS
     #define E5_RSENSE         0.11
     #define E5_CHAIN_POS     -1
     //#define E5_INTERPOLATE true
@@ -2489,7 +2490,7 @@
 
   #if AXIS_IS_TMC(E6)
     #define E6_CURRENT      800
-    #define E6_MICROSTEPS   E0_MICROSTEPS
+    #define E6_MICROSTEPS    E0_MICROSTEPS
     #define E6_RSENSE         0.11
     #define E6_CHAIN_POS     -1
     //#define E6_INTERPOLATE true
@@ -2497,7 +2498,7 @@
 
   #if AXIS_IS_TMC(E7)
     #define E7_CURRENT      800
-    #define E7_MICROSTEPS   E0_MICROSTEPS
+    #define E7_MICROSTEPS    E0_MICROSTEPS
     #define E7_RSENSE         0.11
     #define E7_CHAIN_POS     -1
     //#define E7_INTERPOLATE true