3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2026-01-24 22:17:27 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions

🔧 BIQU BX - All Metal Hotend
Some checks are pending
Deploy / deploy (push) Waiting to run
Details

Browse source
This commit is contained in:
Scott Lahteine 2025-10-19 18:51:00 -05:00
parent fccd7ba43b
commit 8dbf21688d
4 changed files with 13 additions and 11 deletions
Download patch file Download diff file Expand all files Collapse all files

10
config/examples/BIQU/BX/all-metal-hotend/Configuration.h
View file

@ -34,7 +34,7 @@
*/
//#define MOTHERBOARD BOARD_BTT_SKR_SE_BX_V3 // Uncomment for the V3.0 board, otherwise V2.0 is assumed
//#define BX_ALL_METAL_HOTEND // Uncomment for newer H2 extruder with all metal heatbreak
#define BX_ALL_METAL_HOTEND // Uncomment for newer H2 extruder with all metal heatbreak
//#define BX_SWAP_ZM_E1M // Uncomment to swap Z and E1 motors
/**
@ -1444,7 +1444,7 @@
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
// Force the use of the probe for Z-axis homing
//#define USE_PROBE_FOR_Z_HOMING
#define USE_PROBE_FOR_Z_HOMING
/**
* Z_MIN_PROBE_PIN
@ -2232,7 +2232,7 @@
/**
* Enable the G26 Mesh Validation Pattern tool.
*/
//#define G26_MESH_VALIDATION
#define G26_MESH_VALIDATION
#if ENABLED(G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26.
@ -2401,7 +2401,7 @@
* - Allows Z homing only when XY positions are known and trusted.
* - If stepper drivers sleep, XY homing may be required again before Z homing.
*/
//#define Z_SAFE_HOMING
#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT X_CENTER // (mm) X point for Z homing
@ -2410,7 +2410,7 @@
#endif
// Homing speeds (linear=mm/min, rotational=°/min)
#define HOMING_FEEDRATE_MM_M { (21*60), (21*60), (6*60) }
#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (6*60) }
// Edit homing feedrates with M210 and MarlinUI menu items
#define EDITABLE_HOMING_FEEDRATE

5
config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h
View file

@ -1147,10 +1147,10 @@
* Enable/disable and set parameters with G-code M493 and M494.
* See ft_types.h for named values used by FTM options.
*/
//#define FT_MOTION
#define FT_MOTION
#if ENABLED(FT_MOTION)
//#define FTM_IS_DEFAULT_MOTION // Use FT Motion as the factory default?
//#define FT_MOTION_MENU // Provide a MarlinUI menu to set M493 and M494 parameters
#define FT_MOTION_MENU // Provide a MarlinUI menu to set M493 and M494 parameters
//#define FTM_HOME_AND_PROBE // Use FT Motion for homing / probing. Disable if FT Motion breaks these functions.
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
@ -1645,6 +1645,7 @@
#if ANY(HAS_MARLINUI_U8GLIB, TFT_COLOR_UI)
//#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash)
#define BOOT_MARLIN_LOGO_HUGE // Full 1024x600 boot screen design
//#define BOOT_MARLIN_LOGO_ROUND // Classic design by Luu Lac
#endif
#if HAS_MARLINUI_U8GLIB
//#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of flash.

4
config/examples/BIQU/BX/base/Configuration.h
View file

@ -2232,7 +2232,7 @@
/**
* Enable the G26 Mesh Validation Pattern tool.
*/
//#define G26_MESH_VALIDATION
#define G26_MESH_VALIDATION
#if ENABLED(G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26.
@ -2410,7 +2410,7 @@
#endif
// Homing speeds (linear=mm/min, rotational=°/min)
#define HOMING_FEEDRATE_MM_M { (21*60), (21*60), (6*60) }
#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (6*60) }
// Edit homing feedrates with M210 and MarlinUI menu items
#define EDITABLE_HOMING_FEEDRATE

5
config/examples/BIQU/BX/base/Configuration_adv.h
View file

@ -1147,10 +1147,10 @@
* Enable/disable and set parameters with G-code M493 and M494.
* See ft_types.h for named values used by FTM options.
*/
//#define FT_MOTION
#define FT_MOTION
#if ENABLED(FT_MOTION)
//#define FTM_IS_DEFAULT_MOTION // Use FT Motion as the factory default?
//#define FT_MOTION_MENU // Provide a MarlinUI menu to set M493 and M494 parameters
#define FT_MOTION_MENU // Provide a MarlinUI menu to set M493 and M494 parameters
//#define FTM_HOME_AND_PROBE // Use FT Motion for homing / probing. Disable if FT Motion breaks these functions.
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
@ -1645,6 +1645,7 @@
#if ANY(HAS_MARLINUI_U8GLIB, TFT_COLOR_UI)
//#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash)
#define BOOT_MARLIN_LOGO_HUGE // Full 1024x600 boot screen design
//#define BOOT_MARLIN_LOGO_ROUND // Classic design by Luu Lac
#endif
#if HAS_MARLINUI_U8GLIB
//#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of flash.