From 0e76172ca9ab5bb661457e0e5601952222686fec Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 5 Jun 2023 23:21:10 -0500 Subject: [PATCH] =?UTF-8?q?=F0=9F=A9=B9=20Remove=20extra=20MAX=5FBED=5FPOW?= =?UTF-8?q?ER?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- config/examples/Formbot/T_Rex_2+/Configuration.h | 10 +--------- config/examples/LulzBot/TAZ4/Configuration.h | 10 +--------- config/examples/VORONDesign/Configuration.h | 10 +--------- config/examples/makibox/Configuration.h | 16 ++++------------ 4 files changed, 7 insertions(+), 39 deletions(-) diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 39d02589c7..309b1c6a48 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -750,7 +750,7 @@ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current +#define MAX_BED_POWER 200 // limits duty cycle to bed; 255=full current /** * PID Bed Heating @@ -766,14 +766,6 @@ */ #define PIDTEMPBED -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 200 // limits duty cycle to bed; 255=full current - #if ENABLED(PIDTEMPBED) //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Print Bed PID debug data to the serial port. diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index 46b3ffce61..127c9745a3 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -756,7 +756,7 @@ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current +#define MAX_BED_POWER 206 // limits duty cycle to bed; 255=full current /** * PID Bed Heating @@ -772,14 +772,6 @@ */ #define PIDTEMPBED -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 206 // limits duty cycle to bed; 255=full current - #if ENABLED(PIDTEMPBED) //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Print Bed PID debug data to the serial port. diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 0f49fe0499..782a13375f 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -751,7 +751,7 @@ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current +#define MAX_BED_POWER 205 // limits duty cycle to bed; 255=full current /** * PID Bed Heating @@ -767,14 +767,6 @@ */ //#define PIDTEMPBED -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 205 // limits duty cycle to bed; 255=full current - #if ENABLED(PIDTEMPBED) //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Print Bed PID debug data to the serial port. diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 46e7e23b66..854ce3f697 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -750,7 +750,10 @@ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current +#define MAX_BED_POWER 175 // limits duty cycle to bed; 255=full current +// This limit is set to 175 by default in the Makibox configuration and it can be adjusted +// to increase the heatup rate. However, if changed, be aware of the safety concerns of +// drawing too much current from the power supply. /** * PID Bed Heating @@ -766,17 +769,6 @@ */ //#define PIDTEMPBED -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 175 // limits duty cycle to bed; 255=full current -// This limit is set to 175 by default in the Makibox configuration and it can be adjusted -// to increase the heatup rate. However, if changed, be aware of the safety concerns of -// drawing too much current from the power supply. - #if ENABLED(PIDTEMPBED) //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.