diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h
index 39d02589c7..309b1c6a48 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration.h
@@ -750,7 +750,7 @@
  * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
  * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
  */
-#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
+#define MAX_BED_POWER 200 // limits duty cycle to bed; 255=full current
 
 /**
  * PID Bed Heating
@@ -766,14 +766,6 @@
  */
 #define PIDTEMPBED
 
-/**
- * Max Bed Power
- * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
- * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
- * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
- */
-#define MAX_BED_POWER 200 // limits duty cycle to bed; 255=full current
-
 #if ENABLED(PIDTEMPBED)
   //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h
index 46b3ffce61..127c9745a3 100644
--- a/config/examples/LulzBot/TAZ4/Configuration.h
+++ b/config/examples/LulzBot/TAZ4/Configuration.h
@@ -756,7 +756,7 @@
  * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
  * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
  */
-#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
+#define MAX_BED_POWER 206 // limits duty cycle to bed; 255=full current
 
 /**
  * PID Bed Heating
@@ -772,14 +772,6 @@
  */
 #define PIDTEMPBED
 
-/**
- * Max Bed Power
- * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
- * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
- * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
- */
-#define MAX_BED_POWER 206 // limits duty cycle to bed; 255=full current
-
 #if ENABLED(PIDTEMPBED)
   //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h
index 0f49fe0499..782a13375f 100644
--- a/config/examples/VORONDesign/Configuration.h
+++ b/config/examples/VORONDesign/Configuration.h
@@ -751,7 +751,7 @@
  * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
  * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
  */
-#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
+#define MAX_BED_POWER 205 // limits duty cycle to bed; 255=full current
 
 /**
  * PID Bed Heating
@@ -767,14 +767,6 @@
  */
 //#define PIDTEMPBED
 
-/**
- * Max Bed Power
- * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
- * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
- * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
- */
-#define MAX_BED_POWER 205 // limits duty cycle to bed; 255=full current
-
 #if ENABLED(PIDTEMPBED)
   //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h
index 46e7e23b66..854ce3f697 100644
--- a/config/examples/makibox/Configuration.h
+++ b/config/examples/makibox/Configuration.h
@@ -750,7 +750,10 @@
  * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
  * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
  */
-#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
+#define MAX_BED_POWER 175 // limits duty cycle to bed; 255=full current
+// This limit is set to 175 by default in the Makibox configuration and it can be adjusted
+// to increase the heatup rate. However, if changed, be aware of the safety concerns of
+// drawing too much current from the power supply.
 
 /**
  * PID Bed Heating
@@ -766,17 +769,6 @@
  */
 //#define PIDTEMPBED
 
-/**
- * Max Bed Power
- * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
- * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
- * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
- */
-#define MAX_BED_POWER 175 // limits duty cycle to bed; 255=full current
-// This limit is set to 175 by default in the Makibox configuration and it can be adjusted
-// to increase the heatup rate. However, if changed, be aware of the safety concerns of
-// drawing too much current from the power supply.
-
 #if ENABLED(PIDTEMPBED)
   //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.